• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.354-356
• /
• 2005

Novel structure ultrasonic motors which have cross type stator were designed and fabricated. Driving characteristics of the motors were analyzed and measured by changing the materials of the stator. This ultrasonic motor has stator with hollowed cross bar and the stator rotate the rotor using elliptical displacement of the inside tips. This motion is generated by lateral vibration mode of cross bars. This stator was analyzed by finite element analysis and the ultrasonic motors were made by analyzed results. The larger displacements were obtained, when the Young's modulus was increased and the Poisson's ratio was decreased. The fabricated one has high speed in large Poisson's ratio and Young's modulus. And the torque was increased in high Young's modulus.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3685-3693
• /
• 2021

This paper presents a disturbance observer-based robust backstepping load-following control (DO-RBLFC) scheme for modular high-temperature gas-cooled reactors (MHTGRs) in the presence of actuator saturation and disturbances. Based on reactor kinetics and temperature reactivity feedback, the mathematical model of the MHTGR is first established. After that, a DO is constructed to estimate the unknown compound disturbances including model uncertainties, external disturbances, and unmeasured states. Besides, the actuator saturation is compensated by employing an auxiliary function in this paper. With the help of the DO, a robust load-following controller is developed via the backstepping technique to improve the load-following performance of the MHTGR subject to disturbances. At last, simulation and comparison results verify that the proposed DO-RBLFC scheme offers higher load-following accuracy, better disturbances rejection capability, and lower control rod speed than a PID controller, a conventional backstepping controller, and a disturbance observer-based adaptive sliding mode controller.

• Tribology and Lubricants
• /
• 제14권1호
• /
• pp.70-78
• /
• 1998

Two different friction materials (organic and low-metallic pads) for automotive brakes were studied to investigate the anti-fading phenomena during stop. The anti-fading phenomena were pronounced more in the case of using low metallic friction materials than organic friction materials. The main cause of the anti-fading phenomena was the high dependence of friction coefficient on a sliding speed. The anti-fading was prominent when the initial brake temperature was high in the case of low-metallic friction materials due to the strong stick-slip event at high temperature. On the other hand, the anti-fading was not severe in organic friction materials and the effect was reduced at high braking temperature due to the thermal decomposition of organic friction materials. The strong stickslip phenomena of low metallic friction materials at high temperature induced high torque oscillations during drag test. During this experiment two different braking control modes (pressure controlled and torque controlled modes) were compared. The type of the control mode used for brake test significantly affected the friction characteristics.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.981-984
• /
• 2011

에틸렌 연료의 이중모드 스크램제트 연소기에서 연소와 충격파 열 발생의 과도 과정을 고해상도 기법을 이용하여 수치적으로 연구하였다. 연료 분사 이후 질량 공급에 의한 아음속 유동 감속을 위하여 연소기 확장부에 조절용 공기를 공급한다. 공기와 연료가 충분히 혼합된 수 ms 이후 점화가 이루어지며, 압력 상승은 격리부에 흡입구 노즐까지 전진하는 충격파 열을 형성한다. 이후 후방 공기공급을 중단하면 배출 과정이 진행되면서 후방 공기 공급 이전 상태로 서서히 복원된다. 본 연구의 결과는 이중모드 스크램제트 연소기에서 작동 영역과 특징의 이해를 돕는 상세 과정을 보여주었다.

• 전자공학회논문지C
• /
• 제36C권3호
• /
• pp.26-34
• /
• 1999

실리콘 집적회로 인터컨넥트에서 전송선 파라미터를 추출하는 새로운 방법을 제시하고 이를 실험적으로 고찰 한다. 실리콘 기판 위에 있는 전송선에서의 신호는 PCB (printed circuit board)혹은 MCM (multi-chip module)의 인터컨넥트와 같은 마이크로 스트립 구조에서 가정하는 quasi-TEM 모드가 아니라 slow wave mode (SWM)로 대부분의 에너지가 전송되기 때문에 기판의 효과를 고려하여 전송선 파라미터를 추출한다. 실리콘 기판에서 전계 및 자계의 특성을 고려하여 커패시턴스 파라미터의 계산을 실리콘 표면을 그라운드로 설정하고 계산하고 인덕턴스는 단일 전송선 모델로부터 추출한 실효 유전상수를 도입하여 계산한다. 제안한 전송선 파라미터 추출 방법의 타당성을 검증하기 위하여 테스트 패턴을 제작하여 실험적 파리미터 추출 값이 제시한 방법의 결과와 약 10% 이내에서 일치한다는 것을 보여 계산 방법의 타당성을 입증한다. 또한 고속 샘플링 오실로스코프(TDR/TDT 메터) 측정을 통하여 제시한 방법이 크로스톡 노이즈를 정확히 예측 할 수 있는 반면 흔히 사용하고 있는 기판의 효과를 고려하지 않는 RC 모델 혹은 ？ 모델은 약 20∼25% 정도 과소 오차(underestimation error)를 보인다는 것을 보인다.

• 한국통신학회논문지
• /
• 제29권4C호
• /
• pp.581-593
• /
• 2004

무선랜 시스템이 초고속 무선인터넷의 인프라로 자리 잡으면서 무선랜 보안에 관한 관심이 급속히 커가고 있다. 기존의 IEEE 802.11 기반의 무선랜 보안 요소라 할 수 있는 WEP 알고리즘의 취약점을 극복하기 위한 노력의 일환으로 Wi-Fi에서는 WPA 보안규격을 발표하였다. WEP 알고리즘을 사용하는 단말기와 WPA 지원 단말기가 동시에 존재하는 혼합모드 무선랜 환경에서는 각 단말기별 unicast용 pairwise 키 관리와 전체 단말기에 대한 broadcast용 group 키 관리가 훨씬 복잡하다. 본 논문에서는 pairwise 키와 group 키 관리를 위한 WPA authenticator 키 관리 상태머신의 취약점을 분석하고, 분석된 각각의 취약점을 극복할 수 있는 대응방안을 제시한다. 또한, 제시된 해결방안이 적용된 WPA authenticator 키 관리 상태머신의 재구성된 형태를 보인다. 본 논문에서 재구성한 키 관리 방식은 혼합모드 무선랜 환경에서 다양한 접속 방식의 단말기들에 대해서 group 키 교환과 group 키 업데이트 수행을 효과적으로 처리할 수 있는 토대를 제공한다.

• 한국정보통신학회논문지
• /
• 제12권11호
• /
• pp.2031-2038
• /
• 2008

무선 USB 시스템의 호스트-디바이스 간에 4-way handshake 상호 인증을 위한 PRF(Pseudo Random Function)-256, PRF-64 및 데이터 암/복호 기능을 수행하는 저면적 고속 인증/보안 프로세서 (WUSB_Sec) IP를 설계하였다. PRF-256과 PRF-64는 CCM(Counter mode with CBC-MAC) 연산을 기반으로 구현되며, CCM은 AES(Advanced Encryption Standard) 암호 코어 2개를 사용하여 CBC 모드와 CTR 모드가 병렬로 처리되도록 설계되었다. WUSB_Sec 프로세서의 핵심 블록인 AES 암호 코어는 합성체 GF$(((2^2)^2)^2)$ 연산 기반의 S-Box로 설계되었으며, SubByte 블록과 키 스케줄러가 S-Box를 공유하도록 설계하여 약 10%의 면적을 감소시켰다. 설계된 WUSB_Sec IP는 약 25,000 게이트로 구현되었으며, 120MHz에 서 동작하여 480Mbps의 성능을 갖는다.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.421-432
• /
• 2019

In high-speed railway (HSR) system, the structure-borne noise inside viaduct at low frequency has been extensively investigated for its mitigation as a research hotspot owing to its harm to the nearby residents. This study proposed a novel acoustic optimization method for declining the structure-borne noise in viaduct-like structures by separating the acoustic contribution of each structural component in the measured acoustic field. The structural vibration and related acoustic sourcing, propagation, and radiation characteristics for the viaduct box girder under passing vehicle loading are studied by incorporating Finite Element Method (FEM) with Modal Acoustic Vector (MAV) analysis. Based on the Modal Acoustic Transfer Vector (MATV), the structural vibration mode that contributes maximum to the structure-borne noise shall be hereinafter filtered for the acoustic radiation. With vibration mode shapes, the locations of maximum amplitudes for being ribbed to mitigate the structure-borne noise are then obtained, and the structure-borne noise mitigation performance shall be eventually analyzed regarding to the ribbing conduction. The results demonstrate that the structural vibration and structure-borne noise of the viaduct box girder mainly occupy both in the range within 100 Hz, and the dominant frequency bands both are [31.5, 80] Hz. The peak frequency for the structure-borne noise of the viaduct box girder is mainly caused by $16^{th}$ and $62^{th}$ vibration modes; these two mode shapes mainly reflect the local vibration of the wing plate and top plate. By introducing web plate at the maximum amplitude of main mode shapes that contribute most to the acoustic modal contribution factors, the acoustic pressure peaks at the field-testing points are hereinafter obviously declined, this implies that the structure-borne noise mitigation performance is relatively promising for the viaduct.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.417-426
• /
• 2024

Shield tunneling method is widely used to build tunnels in complex geological environment. Stability control of tunnel face is the key to the safety of projects. To improve the excavation efficiency or perform equipment maintenance, the excavation chamber sometimes is not fully filled with support medium, which can reduce the load and increase tunneling speed while easily lead to ground collapse. Due to the high risk of the face failure under non-fully support mode, the tunnel face stability should be carefully evaluated. Whether compressive air is required for compensation and how much air pressure should be provided need to be determined accurately. Based on the upper bound theorem of limit analysis, a non-fully support rotational failure model is developed in this study. The failure mechanism of the model is verified by numerical simulation. It shows that increasing the density of supporting medium could significantly improve the stability of tunnel face while the increase of tunnel diameter would be unfavorable for the face stability. The critical support ratio is used to evaluate the face failure under the nonfully support mode, which could be an important index to determine whether the specific unsupported height could be allowed during shield tunneling. To avoid of face failure under the non-fully support mode, several charts are provided for the assessment of compressed air pressure, which could help engineers to determine the required air pressure for face stability.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.313-318
• /
• 2007

Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. This paper proposes maximum torque control of IPMSM drive using adaptive fuzzy neural network controller and artificial neural network(ANN). This control method is applicable over the entire speed range which considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current $i_d$ for maximum torque operation is derived. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using Adaptive-FNN controller and ANN controller. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability. Also, this paper reposes speed control of IPMSM using Adaptive-FNN and estimation of speed using ANN controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The proposed control algorithm is a lied to IPMSM drive system controlled Adaptive-FNN and ANN controller, the operating characteristics controlled by maximum torque control are examined in detail. Also, this paper proposes the analysis results to verify the effectiveness of the Adaptive-FNN and ANN controller.