• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.30-34
• /
• 2017

This paper is concerned with product assurance for the secondary payload, which is used for technology and science research, in the satellite system, which consists primarily of the spacecraft and the primary payload (a high-resolution optical camera). The Korean satellite development program has successfully insured the safety of the spacecraft and primary payload. However, given the limits of budget and schedule, it is very important to establish adequate product assurance for the secondary payload, which has a lower priority than the spacecraft or primary payload. This paper studies the concept of product assurance for the secondary payload of technological and scientific equipment.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.545-556
• /
• 2023

This paper introduces volume-sharing multi-aperture imaging (VMAI), a potential approach proposed for volume reduction in space-borne imagers, with the aim of achieving high-resolution ground spatial imagery using deep learning methods, with reduced volume compared to conventional approaches. As an intermediate step in the VMAI payload development, we present a phase-1 design targeting a 1-meter ground sampling distance (GSD) at 500 km altitude. Although its optical imaging capability does not surpass conventional approaches, it remains attractive for specific applications on small satellite platforms, particularly surveillance missions. The design integrates one wide-field and three narrow-field cameras with volume sharing and no optical interference. Capturing independent images from the four cameras, the payload emulates a large circular aperture to address diffraction and synthesizes high-resolution images using deep learning. Computational simulations validated the VMAI approach, while addressing challenges like lower signal-to-noise (SNR) values resulting from aperture segmentation. Future work will focus on further reducing the volume and refining SNR management.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.512-514
• /
• 2004

The Electro-Optical Camera (EOC) is a high spatial resolution, visible imaging sensor which collects visible image data of the earth's sunlit surface and is the primary payload on KOMPSAT-l. The purpose of the EOC payload is to provide high resolution visible imagery data to support cartography of the Korean Peninsula. The EOC is a push broom-scanned sensor which incorporates a single nadir looking telescope. At the nominal altitude of 685Km with the spacecraft in a nadir pointing attitude, the EOC collects data with a ground sample distance of approximately 6.6 meters and a swath width of around 17Km. The EOC is designed to operate with a duty cycle of up to 2 minutes (contiguous) per orbit over the mission lifetime of 3 years with the functions of programmable gain/offset. The EOC has no pointing mechanism of its own. EOC pointing is accomplished by right and left rolling of the spacecraft, as needed. Under nominal operating conditions, the spacecraft can be rolled to an angle in the range from +/- 15 to 30 degrees to support the collection of stereo data. In this paper, the status of EOC such as temperature, dark calibration, cover operation and thermal control is checked and analyzed by continuously monitored state of health (SOH) data and image data during the mission life of 3 years. The aliveness of EOC and operation continuation beyond mission life is confirmed by the results of the analysis.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2002

A high speed data link capability is one of the critical factors in determining the performance of the spaceborne SAR system with high resolution because of the strict requirement far the real-time data transmission of the massive SAR data in a limited time of mission. In this paper, based on the data lint model characterized by the spaceborne small SAR system, the high rate multi-channel data link module is designed including link storage, link processor, transmitter, and wide-angle antenna. The design results are presented with the performance analysis on the data link budget as well as the multi-mode data rate in association with the SAR imaging mode of operation from high resolution to the wide swath.

• Journal of Space Technology and Applications
• /
• v.3 no.3
• /
• pp.257-279
• /
• 2023

Korea Aerospace Research Institute has developed 6U Nano-Satellite high resolution video and image (HiREV) for the purpose of developing core technology for deep space exploration. The 6U HiREV Nano-Satellite has a mission of high-resolution image and video for earth observation, and the thermal pointing error between the lens and the camera module can occur due to the high temperature in camera module on mission mode. The thermal pointing error has a large effect on the resolution, so thermal design should solve it because the HiREV optical camera is developed based on commercial products that are the industrial level. So, when it operates in space, the thermal design is needed, because it has the best performance at room temperature. In this paper, three passive thermal designs were performed for the camera mission payload, and the thermal design was proved to be effective by performing on-orbit thermal analysis.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.157-175
• /
• 2000

A synthetic aperture radar (SAR) system is able to provide all-weather, day-and- night superior imaging capability of the earth surface, and thus is extremely useful in surveillance for both civil and military applications. In this paper, the X-band high resolution spaceborne SAR system design is demonstrated with the key design performance for a given mission and system requirements characterized by the small satellite system. The SAR multi-mode imaging technique is presented with a critical parameter assessment, and the standard mode results are analyzed in terms of the image quality performances. In line with the system requirement X-band SAR payload and ground reception/processing subsystems are designed and the major design results are presented with the key performance characteristics. This small satellite SAR system shows the wide range of imaging capability with high resolution, and proves to be an effective surveillance systems in the light weight, high performance and cost-effective points of view.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.92.6-92
• /
• 2001

MSC is being developed to be installed on KOMPSAT(Korea Multi-Purpose Satellite-II and to provide high resolution multi-spectral. MSC consists of three main subsystems. One is EOS(Electro-Optics Subsystem), another is PMU(Payload Management Unit) and the other is PDTS(Payload Data Transmission Subsystem). There is an SBC(Single Board Computer) in the PMU to control all MSC subsystems. SBC incorporates Intel 80486 as a main processor and VxWorks as a real-time operating system. SBC software consists of four main tasks and several modules to deal with all control information for imaging and all the state of health telemetrv data, and to perform interface with another MSC units. SBC software also has to handle a lot of commands in order for MSC to perform his mission. One mission command consists of a series of related commands, which are In be executed in the designated sequence, with a specified time ...

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.462-467
• /
• 2003

For the Space-borne optical imaging payload system design, light weighting and moderate stiffness of mirror and/or mirror fixation device is very important aspects. The front surface of mirror is regulated by optical performance requirement, but the shape of backplate of mirror is to be optimised while satisfing the required stiffness and weight. According to the results, the best shape of backplate cell is triangular. And also related geometric dimensions and the optimised mounting point of MFD(Mirror Fixation Device) is presented. Finally, natural frequencies and shpaes of mirror structure are analysed.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.42-54
• /
• 2002

In December of 1997, Korea Aerospace Research Institute begin to develope the conceptual design of Kompsat2 as the Kompsat1 design is nearly completed. Basic direction of this design was set up to utilized the heritage of Kompsat1 and modify the payload module to accommodate the new high resolution space borne camera. And in the early stage of this design, total system configuration design study was conducted based on 1st level payload information. In this paper, mechanical system design at various stage is documented and this will be used as a path finder or guidelines in the future feasibility study or conceptual design.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1121-1123
• /
• 2003

The CCD (Charge coupled device) detector that is used to convert the light into electronic data is very important component in satellite camera. A Linear CCD Spectral detector shall be used in the MSC (Multi-Spectral Camera, to obtain data for high-resolution images) Payload. In this paper, the design concept of the CCD detector control module in the MSC CEU (Camera electronic unit) system which will be a payload on KOMPSAT is described in terms of H/W (clock speed and accuracy).