• Journal of Korea Foundry Society
• /
• v.27 no.2
• /
• pp.77-82
• /
• 2007

The effects of thermal gradient and solidification rate on the dendrite arm spacing and carbide morphology were investigated in directionally solidified Ni-base superalloy, CM 247LC. Thermal gradient was controlled by changing the position of the cold chamber and the furnace set temperature. The interface morphology changed from the planar to dendritic as increasing solidification rate. It was found that the dendrite spacing decreased as increasing the thermal gradient as well as the solidification rate. Also, as increasing solidification rate, carbide morphology changed from blocky shape to script and spotty shapes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.299-304
• /
• 2004

In recent years, silicon carbide has emerged as an important material for MEMS application. In order to fabricate an SiC film based MEMS structure by using chemical etching method, high operating temperature is required due to high chemical stability Therefore, dry etching using plasma is the best solution. SiC film was deposited by thermal CVD at the temperature of 100$0^{\circ}C$ and pressure of 10 torr. SiC was dry etched with a reactive ion etching (RIE) system, using SF$_{6}$/O$_2$ and CF$_4$/O$_2$ gas mixture. Etch rate has been investigated as a function of oxygen concentration in the gas mixture, rf power, working pressure and gas flow rate. Etch rate was measured by surface profiler and FE-SEM. SF$_{6}$/O$_2$ gas mixture showed higher etch rate than CF$_4$/O$_2$ gas mixture. Maximum etch rate appeared at RF Power of 450W. $O_2$ dilute mixtures resulted in an increasing of etch rate up to 40％, and the superior anisotropic cross section was observe

• Journal of Korean Society on Water Environment
• /
• v.25 no.5
• /
• pp.727-734
• /
• 2009

This study was carried out to evaluate the high rate biological reactor such as lab scale reactor before the application in site, and to get the basic data for possibility using liquid fertilizer with the effluent from biological reactor when the centrifugal machine was applied. The total volume of this reactor in 6 L, in composted of anoxic reactor (2 L), aerobic reactor (2 L), and nitification reactor (2 L). BOD removal efficiency rates when centrifugal machine was applied after effluent from biological reactor are over than 95%. This biological reactor was required post process to satisfy the effluent standards, and was need centrifugal machine to control the washout of microbes in the reactor. T-N removal efficiency rate in HRT 24 hr with centrifugation is 80.0%, and it is desirable to operate less than $1.3kgN/m^3{\cdot}d$ for 70% of T-N removal efficiency rate. T-P removal efficiency rate in HRT 24 hr is 68.2%, and become higher 71.3% after centrifugation. Considering in the 28.6% T-N removal efficiency rate, the nitrogen contents of the effluent from reactor is 0.34% to satisfy the liquid fertilizer.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.468-475
• /
• 2006

For the filtration of super compactible cake, the high filtration pressure can not improve filtration rate. As the high pressure, in this case, decreases the cake porosity adjacent to filter medium and thus forms 'dense skin' which decreases the rate of liquid flow in a great extent. Actually, there was no method to improve filtration rate for the filtration with super compactible cake. We propose the saturation of $CO_2$ gas into the suspension before the filtration operation for improving the filtration rate. The dissolved $CO_2$ gas transforms itself into gas phase in the dense skin through which the pressure changes dramatically. The gas secures its space inside the dense skin, and finally forms the flow passages which improve the filtration rate.

• Journal of Environmental Health Sciences
• /
• v.10 no.1
• /
• pp.67-77
• /
• 1984

Going to the studies on parasite control carried out in the past. Infection rate among the rural population is contineously decreasing, however, it is still high in Korea. The most important reason for this high infectious rate is the use of manure as fertilizer. This study was aimed at finding the relationship between the infection rate and manure through analizing 83 samples of soil collected from Sa Am-Ri, Kangwon-do in June and July, 1983. The major findings of the study are as follows: 1. 60 cases out of the total sample were carry in at least one or more parasitic eggs, thus revealing 72.3% of positive rate. 2. A total number of 131 parasitic eggs were detected from total sample with an average of 1.6 eggs per 10 g of soil. 3. Asearid eggs more frequently appeared than other parasitic eggs occupying 68.7% or 1.2 eggs in average per 10g of soil. 4. There was revealed positive relationship between infectious rate and frequency of use of manure. (P > 0.05). 5. Infectious rate and average number of parasitic eggs detected were less in the fertilizer mixed with manure and ash than in the soil where only manure was used. (P > 0.05).

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.895-898
• /
• 1999

We calculated Al-Absorption, Al-reflection, and Si-etching probabilities as a function of incident angle and energy using classical molecular dynamics (MD) simulation. Variations of the cases of Al-absorption rate and Al-reflection rate are less than that of Si-etching rate. In contrast with general prediction, our simulation results showed that channeling of the <110> direction occurred the most in the case of incident angle between 30degree and 40degree. We investigated that channeling of the <110> directions quite affect Al-absorption rate in silicon. Since Si-etching rate is high and Al-absorption rate by <110> channeling is high, we found that Al ionized physical vapor deposition (PVD) on Si(001) has a different characteristics with Al ionized PVD on A1(111).

• Journal of Chest Surgery
• /
• v.29 no.5
• /
• pp.536-541
• /
• 1996

Between June 1988 and June 1994, twenty five patients with locAlly advanced esophageal carcinoma received preoperative chemotherapy (Cisplatln, 5-Fluorouracil with or without Etoposide) and followed by resection. All patients had clinical evidence of airway involvement or distant Iymphnode involve- ment (M 1 Iymphnode) on bronchoscopy or computed tomographic scans. The major response rate to chemotherapy decided by the postoperative stage was 48% (12125). The resection rate was 92% (23/25) with overall complete resection rate of 72% (18125). Two patients had exploratory laparotomy (thorn- cotomy) only. Thirteen patients had esophagogastrostomy with a combined abdominl and Rt. thoracic approach (Ivor Lewis operation), slx pAtients had transhiatal esophagectomy, four patients had esophagogastrostomy with a combined Rt. thoracotonly & abdominal, cervical approach. There were three postoperative deaths (12%). Follow-up duration was between 3.3 months to 65 months. Median survival ime of resected patients except hospital death was 14.8 months. Actuarial survival at 12, 24 months was 72.9%, 26.2%. Signifi- cant better survival was associated with responder group (postoperative stage less than lIB) (P=0.029). These results demonstrate that 1) Preoperative Cisplatin based combined chemotherapy Produce high response rate, 2) High complete resection rate with acceptable mortality rate occur after preoperative chemotherapy, 3) Better surviL dl can be anticipated if complete resection performed after major re- sponse to preoperative chemotherapy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.188-194
• /
• 2005

The direct injection diesel engine is one of the most efficient thermal engines. For this reason DI diesel engines are widely used for heavy-duty applications. But the world is faced with very serious problems related to the air pollution due to the exhaust emissions of diesel engine. So, that is air pollution related to exhaust gas resulted from explosive combustion should be improved. Exhaust Gas Recirculation(EGR) is a proven method to reduce NOx emissions. In this study, the experiments were performed at various engine loads while the EGR rates were set from $0\%$ to $30\%.$ The emissions trade-off and combustion of diesel engine are investigated. The brake specific fuel consumption rate is very slightly fluctuated with EGR in the range of experimental conditions. The ignition delay increased with increasing EGR rate. The maximum value of premixed combustion for the rate of heat release is increased with increasing EGR rate. NOx emissions are decreased with increasing EGR rate at high load and high speed. It was found that the exhaust emissions with the EGR system resulted in a very large reduction in oxides of nitrogen at the expense of higher smoke emissions.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.306-310
• /
• 2004

In this paper, we proposed a capacity enhancement method using TCM-128QAM modulation and bandwidth extension of 25MHz in HDR-WPAN (high data rate wireless personal area network) system. In case using TCM-128 QAM modulation scheme, we can obtain maximum 66Mbps transmission rate in bandwidth of 15MHz. If extend bandwidth by 25MHz and roll-off coefficient ${\alpha}=0.35$, we can obtain maximum 110Mbps transmission rate. These results are confirmed through PSD(power spectrum density) analysis and BER (bit error rate) performance.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.131-135
• /
• 2011

The demands of high-strength steel have been steadily increased to reduce the weight of vehicles. Although the TRIP steel has been the promising candidate material for the purpose, high strength hinders the application due to the susceptibility to hydrogen delayed fracture in the corrosive environment. Moreover, the testing method was not specified in the ISO standards. In this work, the test method to evaluate the susceptibility of hydrogen delayed fracture was studied by slow strain rate testing technique. The four test experimental parameters were studied : strain rate, hydrogen charging time, holding time after hydrogen charging, and holding time after cadmium plating. The steel was fractured by hydrogen in case the strain rate was in the range of $1{\times}10^{-4}{\sim}5{\times}10^{-7}/sec$. It was confirmed that the slow strain rate test is effective method to evaluate the susceptibility to hydrogen delayed fracture. The holding time over 24 hrs after hydrogen charging, nullified the hydrogen effect, that is, the specimen was no more susceptible to hydrogen after 24 hrs even though the specimen was fully hydrogen-charged. Moreover, cadmium electroplating could not prevent from diffusing out the hydrogen from the steel in the experiment. The effective experimental procedures were discussed.