• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.139-141
• /
• 2007

Compression tests were carried out to investigate morphologies of compressed specimen, deformation microstructure and stress-strain relation in high-nitrogen austenite stainless steel. Tests were performed under a wide range of temperature and, with true strain rates up to $\dot{\varepsilon}$ =0.05, 0.1, 0.5 and $1.0s^{-1}$. The activation energy of loading force was equal to plastic deformation energy within the temperature range of $900^{\circ}C$ to $1250^{\circ}C$. Dynamically recrystallized grain size decreased with an increasing strain rate and temperature. Flow stresses and deformation microstructures, were used to quantify the critical strain rate and recrystallized grain size. The grain size versus strain rate-temperature map obtained in the study was in good agreement with the deformation microstructures of compressed specimens.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.660-663
• /
• 2006

In this letter, we propose a frame-size adaptive MAC protocol for high rate wireless personal area networks (WPANs). In the proposed scheme, during communication, frame error rate is periodically reported to a transmitting device and the frame size is changed according to the measured results. Thus, the channel can be more effectively utilized by adapting to variable radio conditions. Analytical results show that this scheme achieves a much higher throughput than a non-frame-size adaptive media access control protocol in high-rate WPANs.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.705-711
• /
• 2012

The purpose of this study is to develop the model to estimate the penetration rate of metal under a high power continuous wave laser irradiation. To estimate it, an empirical modeling is more practical when the penetration phenomena of metal by laser irradiation is too complex to be analyzed by the numerical simulation. When several methods published earlier were applied to our results, we found out that their methods were not appropriate as the model. Therefore, we suggested the new empirical method considering effective intensity as a key variable. As a result, we confirmed that the new method was effective to model the penetration rate of SUS304 metal and expected that it could be available to other metals.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.8
• /
• pp.1172-1178
• /
• 2012

In this paper, the gamma ray irradiation test results of the CCD cameras are described. From the low dose-rate (2.11 Gy/h) to the high dose-rate (150 Gy/h) level, which is the same level when the hydrogen explosion was occurred in the 1~3 reactor unit of the Fukushima nuclear power plant, the monitoring performance of the cameras owing to the speckles are evaluated. The numbers of speckles, generated by gamma ray irradiation, in the image of cameras are calculated by image processing technique. And the legibility of the sensor indicator (dosimeter) owing to the numbers of the speckles is presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1470-1477
• /
• 2008

In this paper, a new detection method of series arc-fault signals occurring at the wiring of home appliances is proposed. The discrete wavelet transform was used for the numerical analysis of the variation rate in peak, RMS, noise energy, shoulder of the arc-fault current wave. As a results, the arc distinction threshold value of these variation rates was about 0.1 in most cases. The arc-fault current of the loads with the active PFC circuit showed a high rate of variation in noise energy and shoulder, but arc-fault current of the loads without the active PFC circuit showed a high rate of variation in peak and RMS. The arc fault current in resistive loads showed a high rate of variation in shoulder.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.6
• /
• pp.535-545
• /
• 2013

The goal of stock investment is earning high rate or return with stability. To accomplish this goal, using a portfolio that distributes stocks with high rate of return with less variability and a stock price prediction model with high accuracy is required. In this paper, three methods are suggested to require these conditions. First of all, in portfolio re-balance part, Max-Return and Min-Risk (MRMR) model is suggested to earn the largest rate of return with stability. Secondly, Entering/Leaving Rule (E/L) is suggested to upgrade portfolio when particular stock's rate of return is low. Finally, to use outstanding stock price prediction model, a model based on Semi-Supervised Learning (SSL) which was suggested in last research was applied. The suggested methods were validated and applied on stocks which are listed in KOSPI200 from January 2007 to August 2008.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.79-82
• /
• 1984

This study was carried out to investigate the effect of porous plug wrapping and perforated tipping paper on tip ventilation rate of cigarettes. The wider perforated width of tipping paper was and the more rows Perforation were given, the more increased the effort on the tip ventilation rate, and the high porous plug wrap also had a influence on the tip ventilation rate. Tip ventilation rate purposed would be obtained by adjusting the permeability of tipping papers with high porous plug wrap. To keep the cigarette quality uniform, the high porous plug wrapping paper and the tipping paper of small pore and many rows of perforation must be combined.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.59-70
• /
• 2022

In this paper, a GPS/GF-INS integrated navigation system is proposed, in which the high rate attitude aiding signal, the high rate position and velocity aiding of GPS receiver is used for the cube structure of the GF-IMU, effectiveness of the proposed GPS/GF-INS integrated navigation system was shown when the vehicle follows two trajectories, circling and spiraling. Performance evaluation results show that the proposed GPS/GF-INS integrated navigation method gives better navigation outputs when the attitude output of GPS is used and more better navigation outputs are obtained when the rate of GPS aiding signal is higher.

• Science of Emotion and Sensibility
• /
• v.5 no.1
• /
• pp.71-78
• /
• 2002

Driving involves a series of complicated precesses requiring various human capacities, such as perception, will decision, and athletic functions. Consequently, it induces a high degree of continuous concentration of mind and tension from external stimulation, bringing fatigue to the driver, and driver fatigue is counted as one of the major causes of traffic accidents. Nevertheless, because of the complicated urban lives, traffic congestion, job characteristics, and so on, the drivers have to spend a longer time inside a vehicle, and the fatigue and stress thereof is almost unavoidable. We haute, therefore, turned our attention to the reduction in the fatigue during driving by supplying oxygen, and investigated in this research the drivers subjective fatigue evaluations and reaction time when oxygen is supplied in different rates. As a result, we have found that the subjective fatigue feeling is highest at low-rate O/Sub 2/ supply (18%), and fatigue feeling was comparatively reduced at high-rate O/Sub 2/ (30%). The sleepiness also showed the tendency to be reduced at high-rate O/Sub 2/ supply in the case of driving for 1 hour or more. The time for reaction to braking after the sign for urgent stop is given tends to show more substantial reduction at high-rate O/Sub 2/ supply than at low-rate O/Sub 2/ supply after 2 hours driving. It can, therefore, be deduced from the aforesaid results that the subjective responses and behavioral reactions tend to show reduced fatigue at the condition of high-rate O/Sub 2/ supply. Hence, it was suggested that drivers felt subjective fatigue while driving at low-rate O/Sub 2/ and the subjective fatigue and reaction time were reduced at high-rate O/Sub 2/. These findings suggest that the oxygen supply will reduce driver fatigue.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5080-5097
• /
• 2017

Channel characteristics-based secret key generation is an effective physical-layer security method. The issues of how to remove the effect of random noise and to balance the key generation rate (KGR) and the bit mismatch rate (BMR) are needed to be addressed. In this paper, to reduce the effect of random noise and extract more secret bits, a new quantization scheme with high key generation rate and low bit mismatch rate is proposed. In our proposed scheme, we try to use all measurements and correct the differences caused by noise at the boundary regions instead of simply dropping them. We evaluate and discuss the improvements of our proposed scheme. The results show that our proposed scheme achieves lower bit mismatch rate as well as remaining high key generation rate.