• Journal of Ginseng Research
• /
• v.22 no.4
• /
• pp.299-303
• /
• 1998

To know possibility of raw ginseng production for white- and red-ginseng by direct-sowing culture, seeds were directly sowed or seedlings were transplanted at soil condition of sandy loam in ginseng field. After cultivation, the characters of 5-year-old ginseng were investigated. Number of survived plants was increased with increase the seeding quantity in direct-sowing culture, the survived plants in direct-sowing culture was higher than that of transplanting one. Rate of the numbers of survived plants to numbers of seeds sowed in plots of 134 or 90 seeds sowed per tan, 180 x 90cm area, inspire of high number of survived plant was high compared to that of transplanting culture. Occurrence rate of rusty root of ginseng in direct-sowing culture was low significantly compared to that of transplanting culture. Root yield showed in the order of 134, 268, 90 seeds sowed, the values of yield in direct-sowing culture were high obviously compared to that of transplanting one. Individual root weight was increased with decrease the seeding quantity, however, the root weight in plot of 90 seeds sowed showed almost equal the weight in transplanting culture. The number of usable raw ginseng for white- and red-ginseng was increased with decrease of the seeding quantity; the numbers were higher than that of transplanting culture remarkably. We concluded that optimum seedling rate in direct-sowing culture of ginseng was 90 to 134 seeds per tan considering the yield per area and production rate of large root.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.22-28
• /
• 2015

This paper proposes column-parallel three step Single Slope Analog-to-Digital Converter (SS-ADC) for high frame rate VGA CMOS Image Sensors (CISs). The proposed three step SS-ADC improves the sampling rate while maintaining the architecture of the conventional SS-ADC for high frame rate CIS. The sampling rate of the three-step ADC is increased by a factor of 39 compared with the conventional SS-ADC. The proposed three-step SS-ADC has a 12-bit resolution and 200 kS/s at 25 MHz clock frequency. The VGA CIS using three step SS-ADC has the maximum frame rate of 200 frames/s. The total power consumption is 76 mW with 3.3 V supply voltage without ramp generator buffer. A prototype chip was fabricated in a $0.13{\mu}m$ CMOS process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.248-254
• /
• 2009

The HCCI engine is a next generation engine, with high efficiency and low emissions. The engine may be an alternative to SI and DI engines; however, a pressure rise rate is a major limitation for high load range and power reduction. Recently, we were able to reduce the pressure rise rate using thermal stratification. Nevertheless, this was insufficient to produce high power. In this study, the reduction of the pressure rise rate using thermal stratification was confirmed and the HCCI engine power was increased using the boost pressure. The rate and engine power were produced by CHEMKIN and modified SENKIN. As a result of increasing the boost pressure, a higher IMEP was attained while the pressure rise rate increased only slightly in the HCCI with thermal stratification.

• Land and Housing Review
• /
• v.9 no.4
• /
• pp.10-18
• /
• 2018

As the volatility increasement of the number of tourist, there was been controversy over supply-demand imbalance in hotel market. The purpose of this study is to analysis on determinants of hotel occupancy rate in Jeju Island. The quantitative method is based on cointegrating regression, using an empirical dataset with hotel from 2000 to 2017. The primary results of research is briefly summarized as follows; First, there are high relationship between total hotel occupancy rate and hotel occupancy of foreign tourist. The volatility of hotel occupancy is caused by foreigner user than local tourists though local tourist high propotion of hotel occupancy in Jeju Island. Second, hotel occupancy of local tourist has not relationship with demand and supply variables. Because some hotel users are not local tourists but local resident, and effects to other variables of hotel consumer trend, accommodation such as Guest house, Airbnb. Third, there are high relationship between foreign hotel occupancy rate and demand-supply variables. These research imply that total management of supply-demand is very important to seek stability of hotel occupancy rate in Jeju Island. Also it can provide a useful solution regarding mismatch problem between supply-demand as well as development the systematic forecasting model for hotel market participants.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.9
• /
• pp.1174-1184
• /
• 1997

Extinction characteristics of pure hydrogen-oxygen diffusion flames, at high pressures in the neighborhood of the critical pressure of oxygen, is numerically studied by employing counterflow diffusion flame as a model flame let in turbulent flames in rocket engines. The numerical results show that extinction strain rate increases almost linearly with pressure up to 100 atm, which can be explained by comparison of the chain-branching-reaction rate with the recombination-reaction rate. Since contributions of the chain-branching reactions, two-body reactions, are found to be much greater than those of the recombination reactions, three-body reactions, extinction is controlled by two-body reactions, thereby resulting in the linearity of extinction strain rate to pressure. Therefore, it is found that the chemical kinetic behaviors don't change up to 100 atm. Consideration of the pressure fall-off reactions shows a slight increase in extinction strain rate, but does not modify its linearity to pressure. The reduced kinetic mechanisms, which were verified at low pressures, are found to be still valid at high pressures and show good qualitative agreement in prediction of extinction strain rates. Effect of real gas is negligible on chemical kinetic behaviors of the flames.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.87-92
• /
• 1997

Inductively coupled Cl$_{2}$ plasma has been studied to etch Pt thin films, which hardly form volatile compound with any reactive gas at normal process temperature. Low etch rate and residue problems are frequently observed. For higher etch rate, high density plasma and higher process temperature is adopted observed. For higher etch rate, high density plasma and higher process temperature is adopted and thus SiO$_{2}$ is used as for patterning mask instead of photoresist. The effect of O$_{2}$ or Ar addition to Cl$_{2}$ was investigated, and the chamber pressure, gas flow rate, surce RF power and bias RF power are also varied to check their effects on etch rate and selectivity. The major etching mechanism is the physical sputtering, but the ion assisted chemical raction is also found to be a big factor. The proposs can be optimized to obtain the etch rate of Pt up to 200nm/min and selectivity to SiO$_{2}$ at 2.0 or more. Patterning of submicron Pt lines are successfully demonstrated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1772-1782
• /
• 1993

The characteristics of metal matrix composite under dynamic tension at high strain rates up to the order of $10^3/sec$ is studied by using newly developed apparatus. The composite material processed in this research is aluminum-alumina metal matrix composites, arid fabricated by compocasting with the fiber volume fraction from 5 to 20%. The whisker and matrix material used in this paper were ${\delta}-Al_2O_3$ and Al-6061, respectively. The mechanical tests performed in this research are low and high strain rate tensile test. At low strain-rate tensile test, the modulus of elasticity and the ultimate tensile strength of the composites were improved about 77 pct. and 55 pct., respectively comparing with the unreinforced materials. At strain-rate from $10^{-3}\;to\;10^3/s$, the effect of strain-rate on the modulus, ultimate strength, flow stress is determined. Also the effect of strain rate on the modulus, ultimate tensile strength, flow stress and elongation to failures were investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.180-180
• /
• 2010

The design and implementation of high rate deposition process and anti-scratch property of silicon oxide film by PECVD with UHF power were investigated according to the effect of UHF input power with HF bias. New regime of high rate deposition of SiOx films by hybrid plasma process was investigated. The dissociation of OMCTS (C8H24Si4O4) precursor was controlled by plasma processes. SiOx films were deposited on polyethylene terephthalate (PET) and polycarbonate substrate by plasma enhanced chemical vapor deposition (PECVD) using OMCTS with oxygen carrier gas. As the input energy increased, the deposition rate of SiOx film increased. The plasma diagnostics were performed by optical emission spectrometry. The deposition rate was characterized by alpha-step. The mechanical properties of the coatings were examined by nano-indenter and pencil hardness, respectively. The deposition rate of the SiOx films could be controlled by the appropriate intensity of excited neutrals, ionized atoms and UHF input power with HF bias at room temperature, as well as the dissociation of OMCTS.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.180-181
• /
• 2017

This study aims to analyze the high strength mortar's fundamental properties and autogenous shrinkage properties by taking into consideration the result of the previous study in which it was found that ERBO(Biodiesel) exercises greatest effect on the expansion effect of mortar, and changing the time and rate of mixing the ERBO. A total of five levels were set as experimental variables: the three levels of the rate of ERBO, 0, 0.5, 1.0%, and the two levels of the time of mixing the ERBO: first, adding the ERBO with the mixing water and mixing it before, and second, mixing it after the mortar is completely mixed. It was found that the rate of length change decreased as the rate of ERBO increased, and the rate of length change was lower when the ERBO was mixed sooner.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.87-91
• /
• 2008

The study examined fire resistance of concrete followed by change of mixed rate in PP and NY composite fiber and the results were as follows. In the event of fluidity in concrete not set, plane satisfied 600±100, its target slump flow, and fluidity was reduced as organic fiber's mixed rate was increased. Air amount satisfied 3.0±1.0, its target air amount, and didn't have distinct differences in reduction and increase according to organic fiber's kind and change of its mixed rate. However, it had a tendency that fluidity was reduced as the mixed rate was increased. In characteristics of hardening concrete, the 28th day compressive strength followed by organic fiber's kind and change of its mixed rate didn't have a lot of differences and satisfied high strength scope as about 70MPa. In spalling characteristics after fire resistance test, spalling was happened in non-mixture, plane combination, and P1N0. In other combinations, spalling resistance was happened. The relic compressive strength rate was 56%, the best condition, in P3N1(PP0.03%, NY0.01% compositeness) mixing PP fiber with NY fiber at once.