• 대한조선학회논문집
• /
• 제32권1호
• /
• pp.58-69
• /
• 1995

본 논문에서는 이상유체모델에서의 비선형 자유표면파의 발생, 전파 및 상호간섭에 대한 비정상 문제의 수치해법을 개발하였다. 본 수치해법은 매 시간 스텝에서 비선형 축차해법을 이용한 음함수적(implicit)방법이다. 속도장함수를 구하기 위하여 경계접합좌표계를 도입한 유한차분법을 이용하였다. 본 수치해법의 유효성과 효율성의 검증을 위하여 타원형 유체의 변형과 바닥의 일부분이 올라옴으로서 발생하는 자유표면파의 생성에 대한 두 가지 계산결과를 보여준다.

• Journal of Microbiology and Biotechnology
• /
• 제33권5호
• /
• pp.662-667
• /
• 2023

Allantoin is an abundant component of yams and has been known as a skin protectant due to its pharmacological activities. In previous methods for allantoin determination using high-performance liquid chromatography (HPLC), the separation was unsatisfactory. We herein developed a ¹H quantitative nuclear magnetic resonance (qNMR) method for quantification of allantoin in the flesh and peel of yams. The method was carried out based on the relative ratio of signals integration of allantoin to a certain amount of the internal standard dimethyl sulfone (DMSO₂) and validated in terms of specificity, linearity (range 62.5-2000 ㎍/ml), sensitivity (limit of detection (LOD) and quantification (LOQ) 4.63 and 14.03 ㎍/ml, respectively), precision (RSD% 0.02-0.26), and recovery (86.35-92.11%). The method was then applied for the evaluation of allantoin in flesh and peel extracts of four different yams cultivated in Korea.

• Advances in nano research
• /
• 제14권5호
• /
• pp.451-461
• /
• 2023

Two-dimensional (2D) materials have been attracting attention since graphene monolayer was firstly separated. However, after an explosive boom, there is always quandary and stagnancy following and soon will come the refractory period of capital market. To avoid that undesired future, a paradigm of quasi 2D monolayer has been contemplated and devised in this article, with examples studied theoretically. The results show the general dynamic nonlinearity, and the expected tunability of bandgap without extra doping or substitution. These together suggest its intriguing both electronical and mechanical properties, which will enrich the arsenal of potential 2D materials.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2557-2562
• /
• 2024

A type of integrated multiple-single-channel analyzer (IMSCA) is described. The IMSCA works with an input pulse of 2-20 pC, and it can be directly connected to a scintillation detector, which eliminates the need for a linear amplifier. It consists of 64 input ports, so 1-64 detectors can be set by users according to different requirements. Two energy regions for each input channel can be simultaneously analyzed. Another advantage of the IMSCA is that it integrates with a high-speed pulse signal acquisition card and transmits data to the computer through the network. The maximum pulse through-rate is 1.4 MHz, and linearity can reach 0.1%. This IMSCA has been successfully used in enrichment detecting of nuclear fuel rod.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.53-58
• /
• 2001

This paper presents a high resolution capacitive microaccelerometer for applications to personal information systems. We reduce the mechanical noise level of the microaccelerometer by increasing the proof-mass based on deep RIE process. We reduce the electrical noise level by increasing the amplitude of an AC sense voltage. The high sense voltage is obtained by DC-to-DC voltage multiplier. In order to solve the nonlinearity problem caused by the high sense voltage, we modify the conventional comb electrode of straight finger type into that of branched finger type, resulting in self force-balancing effects for enhanced detection linearity. The proposed branched finger capacitive microaccelerometer was fabricated by the deep RIE process of an SOI wafer. The fabricated microaccelerometer reduces the electrical noise at the level of $2.4{\mu}g/\sqrt{Hz}$ for the sense voltage of l6.5V, which is 10.1 times smaller than the electrical noise level of $24.3{\mu}g/\sqrt{Hz}$ at 0.9V. For the sense voltage higher than 2V, the electrical noise level of the microaccelerometer became smaller than the constant mechanical noise level of $11{\mu}g/\sqrt{Hz}$. Total noise level, including the electrical noise and the mechanical noise, has been measured as $9{\mu}g/\sqrt{Hz}$ for the sense voltage of 16.5V, which is 3.2 times smaller than the total noise of $28.6{\mu}g/\sqrt{Hz}$ for the sense voltage of 0.9V. The self force-balancing effect results in the increased stiffness of 1.98 N/m at the sense voltage of 17.8V, compared to the stiffness of 1.35 N/m at 0V, thereby generating the additional stiffness at the rate of $0.002N/m/V^{2}$.

• 전자공학회논문지
• /
• 제51권9호
• /
• pp.46-53
• /
• 2014

본 논문에서는 무인항공기 가시선 데이터링크 Ku 대역 RF 송수신 시스템을 설계하였다. RF 송수신 시스템은 송수신반, RF 전단반, 고출력증폭반으로 구성되어 있다. 송수신반은 주파수 상/하향 변환 기능과 채널 변경 기능을 제공하며, RF 전단반은 송/수신 신호 이중화, 안테나 선택, 소신호 증폭, 수신신호 외 주파수 필터링 기능을 제공한다. 고출력증폭반은 Ku 대역 전력증폭과 송신출력 가변(고/중/저/Mute) 기능을 제공한다. 송수신반의 주파수 상/하향 변환은 슈퍼헤테로다인 방식으로 구현하였다. RF 송수신 시스템은 대용량 고속 데이터의 신뢰성 있는 송수신을 위하여 광대역 고선형 특성을 갖도록 설계하였다. 또한, 무인항공기 운용 환경에 따른 주파수의 선택적 사용을 위하여 채널 변경이 가능하도록 설계하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권4호
• /
• pp.169-174
• /
• 2002

This paper presents a high-resolution capactive microaccelerometer using branched finger electrodes with high-amplitude sense voltage. From the fabricated microacceleromcter, the total noise is obtained as 9 $\mu\textrm{g}$/√Hz at the sense voltage of 16.5V, while the conventional microaccelerometers have shown the noire level of 25~800 $\mu\textrm{g}$/√Hz. We reduce the mechanical noise level of the microaccelerometer by increasing the proof-class based on deep RIE process of an SOI wafer. We reduce the electrical noise level by increasing the amplitude of AC sense voltage. The nonlinearity problem caused by the high-amplitude sense volage has been solved by a new electrode design of branched finger type, resulting in self force-balancing effects for the enhanced linearity and bandwidth. The fabricated microaccelerometer shows the electrical noise of 2.4 $\mu\textrm{g}$/√Hz at the sense voltage of 16.5V, which is an order of magnitude reduction of the electrical noise of 24.3 $\mu\textrm{g}$/√Hz measured at 0.9V. For the sense voltage higher than 2V, the electrical noise of the microaccelerometer is lower than the voltage-independent mechanical noise of 11 $\mu\textrm{g}$/√Hz. Total noise, composed of the electrical noise and the mechanical noire, has been measured as 9 $\mu\textrm{g}$/√Hz at the sense voltage of 16.5V, which is 31% of the total noise of 28.6 $\mu\textrm{g}$/√Hz at the sense voltage 0.9V. The self force-balancing effect in the blanched finger electrodes increases the stiffness of the microaccelerometer from 1.1N/m to 1.61N/m as the sense voltage increases from 0V to 17.8V, thereby generating additional stiffness at the rate of 0.0016$\pm$0.0008 N/m/V$^2$.

• 전력전자학회논문지
• /
• 제2권1호
• /
• pp.33-38
• /
• 1997

전기자동차용 배터리 충전회로에는 일반적으로 다양한 전력용 반도체 스위칭 소자들이 사용되고 있다. 따라서 사용소자의 비선형성에 기인하는 고조파 발생과 큰 피크전류, 낮은 역률 등으로 부근에 있는 전력시스템에 과도기전류나 파형 왜곡 현상을 발생한다. 그리하여 최근에는 기존의 정류회로에서 무시되었던 역율제어, 선 전류의 피크치 억제, 고조파 발생문제 등이 보다 중요하게 되었다. 따라서 본 연구에서는 기존의 문제점들을 해결하기 위해 전압 상승특성을 개선하고 역율이 0.97이상인 고역율 배터리 충전기용 콘버어터 회로를 제안하고자 한다. 제안된 시스템은 정류된 직류전압을 고주파 인버어터에서 교류 공진파로 변환하고, 고주파 트랜스를 통과한 전압을 다시 정류하여 직류전압으로 변환한다. 특히, 이러한 콘버어터의 사용효과는 역율제어에 의해서 크게 개선될 수 있는데, 납축전지를 이용한 실험을 통해 그 타당성을 입증하고자 한다.

• Journal of Microbiology and Biotechnology
• /
• 제21권2호
• /
• pp.204-211
• /
• 2011

To yield high concentrations of protein expressed by genetically modified Escherichia coli, it is important that the bacterial strains are cultivated to high cell density in industrial bioprocesses. Since the expressed target protein is mostly accumulated inside the E. coli cells, the cellular product formation can be directly correlated to the bacterial biomass concentration. The typical way to determine this concentration is to sample offline. Such manual sampling, however, wastes time and is not efficient for acquiring direct feedback to control a fedbatch fermentation. An E. coli K12-derived strain was cultivated to high cell density in a pressurized stirred bioreactor on a pilot scale, by detecting biomass concentration online using a capacitance probe. This E. coli strain was grown in pure minimal medium using two carbon sources (glucose and glycerol). By applying exponential feeding profiles corresponding to a constant specific growth rate, the E. coli culture grew under carbon-limited conditions to minimize overflow metabolites. A high linearity was found between capacitance and biomass concentration, whereby up to 85 g/L dry cell weight was measured. To validate the viability of the culture, the oxygen transfer rate (OTR) was determined online, yielding maximum values of 0.69 mol/l/h and 0.98mol/l/h by using glucose and glycerol as carbon sources, respectively. Consequently, online monitoring of biomass using a capacitance probe provides direct and fast information about the viable E. coli biomass generated under aerobic fermentation conditions at elevated headspace pressures.

• Archives of Pharmacal Research
• /
• 제23권6호
• /
• pp.568-573
• /
• 2000

A reversed-phase high-performance liquid chromatographic method was developed to determine the optical purity of bevantolol enantiomers. (S)-(-)-Menthyl chloroformate((-)-MCF), (S)-(-)-$\alpha$-methylbenzyl isocyanate((-)-MBIC) and 2,3,4,6-tetra-O-acetyl-$\beta$-D-glucopyranosyl isothiocyanate(GITC), which can react with the secondary amine group of bevantolol were investigated as chiral derivatization reagents. Among them indirect chiral HPLC method using CITC gave the best result. The derivatization proceeded quantitatively within 20 min at room temperature. Separation of the enantiomers as diastereomers was achieved by reversed-phase HPLC within 20min using ODS column. Different ratios of (S)-(-)-bevantolol and (R)-(+)-bevantolol were prepared. Enantiomeric separation of these mixtures took place on a chiralcel OD column or, after derivatization with GITC, on a ODS column. No racemization was found during the experiment. This method allowed determination of 0.05% of either enantiomer in the presence of its stereoisomer and method validation showed adequete linearity over the required range.