• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.119-125
• /
• 2014

Echo cancellation is required for a dual-duplex high speed communication such as digital subscriber line(DSL), in order to allow each individual loop to operate in a full duplex fashion. Echo cancellation was one of the most difficult aspects of DSL design, requiring high linearity and total echo return loss in excess of 70 dB. For a long and rapidly changing echo response, if the echo is cancelled by an adaptive echo canceller, the echo canceller needs more taps and its performance is decreased. But if the response is divided into several responses, which response is estimated by a adaptive digital filter and combined, the computation complexities are decreased and the performance is increased. Therefore, the adaptive multi-stage echo canceller is proposed to decrease the computation complexity and increase the performance of echo return loss, in which the echo canceller is composed of several stage echo canceller estimating each divided echo response. Through computer simulations, this multi-stage echo canceller is verified to have merits for high speed communications such as DSL application.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.73-81
• /
• 2002

This paper introduces a four-Pole Lorentz force type self-bearing motor in which a new winding configuration is proposed to enable the sing1e winding to function both as a synchronous PM motor and as a magnetic bearing. The Lorentz force type has some good points such as the linearity of control force, freedom from flux saturation, and high efficiency, unlike conventional self-bearing motors using a reluctance force. And also, compared with the previously proposed eight-pole type, this four-pole self-bearing motor is more profitable for high rotational speed. In this paper, mathematical expressions of torque and radial force in the proposed self-bearing motor are derived to show that they can be separately controlled regardless of rotational speed and time. For verification of the theory, a prototype is made, where a ring-shape outer rotor is actively controlled in two radial directions while the other motions are passively stable supposing the radial stability. Through some experiments. it is shown that the proposed scheme can provide high capability and feasibility for a small high-speed self-bearing motor.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.280-285
• /
• 2015

A fully integrated high-efficiency linear CMOS power amplifier (PA) is developed for 802.11n WLAN applications using the 65-nm standard CMOS technology. The transformer topology is investigated to obtain a high-efficiency and high-linearity performance. By adopting a 2:2 output transformer, an optimum impedance is provided to the PA core. Besides, a LC harmonic control block is added to reduce the AM-to-AM/AM-to-PM distortions. The CMOS PA produces a saturated power of 26.1 dBm with a peak power-added efficiency (PAE) of 38.2%. The PA is tested using an 802.11n signal, and it satisfies the stringent error vector magnitude (EVM) and mask requirements. It achieves -28-dB EVM at an output power of 18.6 dBm with a PAE of 14.7%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.97-100
• /
• 2001

This paper presents the characteristics of Ta-N thin-film strain gauges as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4~16%)$N_2$). These films were annealed for 1 hour in $2{\times}10^{-6}$ Torr vaccum furnace range $500\sim1000^{\circ}C$. The optimized conditions of Ta-N thin-film strain gauges were annealing condition($900^{\circ}C$, 1 hr.) in 8% $N_2$ gas flow ratio deposition atmosphere. Under optimum conditions, the Ta-N thin-films for strain gauges is obtained a high resistivity, $\rho=768.93$ ${\mu}{\Omega}cm$, a low temperature coefficient of resistance, TCR=-84 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal gauge factor, GF=4.12.

• ETRI Journal
• /
• 제42권5호
• /
• pp.773-780
• /
• 2020

A 40 nm complementary metal oxide semiconductor carrier-aggregated drive amplifier with high linearity is presented for sub-GHz Internet of Things applications. The proposed drive amplifier consists of two high linear amplifiers, which are composed of five differential cascode cells. Carrier aggregation can be achieved by switching on both the driver amplifiers simultaneously and combining the two independent signals in the current mode. The common gate bias of the cascode cells is selected to maximize the output 1 dB compression point (P1dB) to support high-linear wideband applications, and is used for the local supply voltage of digital circuitry for gain control. The proposed circuit achieved an output P1dB of 10.7 dBm with over 22.8 dBm of output 3rd-order intercept point up to 0.9 GHz and demonstrated a 55 dBc adjacent channel leakage ratio (ACLR) for the 802.11af with -5 dBm channel power. To the best of our knowledge, this is the first demonstration of the wideband carrier-aggregated drive amplifier that achieves the highest ACLR performance.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.237-240
• /
• 2004

High strain-rate deformation behavior of NiAl/Ni micro-laminated composites was characterized by split hopkins on pressure bar(SHPB). When the strain rate increased, the compressive stress of micro-laminated composites were increased a little. When the intermetallic volume fraction increased, the compressive stress of micro-laminated composites increased linearly irrespective of strain rate. Absorbed energy during the quasi-static and SHPB tests was calculated from the integrated area of stress-strain curve. Absorbed energy of micro-laminated composites deviated from the linearity in terms of the intermetallic volume fraction but merged to the value of intermetallic as the strain rate increased. This was due to high tendency of intermetallic layer for the localization of shear deformation at high strain rate. Microstructure showing adibatic shear band(ASB) confirmed that the shear strain calculated from the misalignment angle of each layer increased and ASB width decreased when the intermetallic volume fraction. Simulation test impacted by tungsten heavy alloy cylinder resulted that the absorbed energies multiplied by damaged volume of micro-laminated composites were decreased as the intermetallic volume fraction increased. Fracture mode were changed from delamination to single fracture when the intermetallic volume fraction and this results were good matched with previous results[l] obtained from the fracture tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.565-568
• /
• 2000

This paper describes on the temperature characteristics of a SDB(silicon-wafer direct bonding) SOI(silicon-on-insulator) Hall sensor. Using the buried oxide $SiO_2$ as a dielectrical isolation layer, a SDB SOI Hall sensor without pn junction isolation has been fabricated on the Si/$SiO_2$/Si structure. The Hall voltage and the sensitivity of the implemented SOI Hall sensor show good linearity with respect to the applied magnetic flux density and supplied current. In the temperature range of 25 to $300^{\circ}C$, the shifts of TCO(temperature coefficient of the offset voltage) and TCS(temperature coefficient of the product sensitivity) are less than $\pm 6.7$$\times$$10^{-3}$/$^{\circ}C$ and $\pm 8.2$$\times$$10^{-4}$/$^{\circ}C$respectively. These results indicate that the SDB SOI structure has potential for the development of a silicon Hall sensor with a high-sensitivity and hip high-temperature operation.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.67-72
• /
• 2023

A simple and accurate method was developed for the quantitative analysis of oleanonic acid (OA) from mastic gum. The analysis was carried out using reverse-phase high-performance liquid chromatography combined with a photodiode array detector (HPLC/PDA). Our optimized method was validated by measuring various parameters, using an INNO C18 column fitted with a gradient elution system. The results revealed limits of detection and quantification of 0.34 and 1.042 ㎍/mL, respectively. The OA calibration curve exhibited excellent linearity over the concentration range of 0.0625 to 2.0 mg/mL, with r² =0.9996. Accuracy tests revealed a high recovery rate of 99.44-103.66%, with precision values below 0.15%. These results suggest that the present analytical method can identify and quantify OA in mastic gum with high precision. The HPLC approach developed in this study might be applied to routine analyses and large-scale extraction procedures for OA content quantification.

• 분석과학
• /
• 제29권6호
• /
• pp.277-282
• /
• 2016

영국약전(BP 2013), 미국약전(USP 39) 그리고 대한민국약전 (KP XI)에 디오스민 원료의 정량법으로 HPLC법이 수재되어 있다. 그러나 위의 외국약전들에는 디오스민 제제의 정량법이 수재되어 있지 않으며 대한민국약전 (KP XI)에는 디오스민 캡슐의 정량법으로 HPLC법보다 덜 특이적인 자외가시부흡 광도측정법이 수재되어 있다. 이 실험에서는 최근의 추세에 따라 원료의 정량법과 같고 특이성이 좋은 HPLC 분석법으로 디오스민 캡슐의 정량법을 개발하였고 이를 검증하였다. HPLC분석법의 검증을 위해 직선성, 정밀성, 정확성, 시스템 적합성, 실험실내 정밀성과 완건성 실험을 실행하였다. 직선성은 결정계수($r^2$)가 0.999 이상으로 우수하였다. 일내 정밀도는 상대표준편차 0.15~0.29%, 일간 정밀도는 1.05~1.74%로, 회수율은 101.2~103.2%로 나타났다. 시스템적합성에서는 머무름시간 상대표준편차(RSD %) 0.37 %, 피크면적 상대표준편차(RSD%) 0.06%, 이론단수 평균값 3591.293 그리고 비대칭계수 평균값 1.35을 나타내었다. 개발한 시험법을 이용하여 시중 유통 중인 디오스민 캡슐 중 디오스민의 함량측정에 응용하였다. 개발된 시험법은 대한민국약전의 개정에 기여할 것이다.

• 분석과학
• /
• 제28권2호
• /
• pp.79-85
• /
• 2015

TLC (SiO₂) 상에서 3가지 유사 암페타민 류 아민 화합물과 3가지 유도체화 시약 사이의 반응으로부터 얻어진 아민유도체의 이미지 분석으로부터 암페타민 류 화합물에 대한 신속하고 경제적인 반정량적인 분석방법을 제시하기 위하여 선행 실험을 하였다. TLC상 직접적인(in situ, co-spot) 유도체화 반응의 적정화를 시도하였고 그 TLC 결과물들을 디지털카메라로 촬영하여 이미지를 얻은 후 2가지의 이미지 분석 프로그램(CP Atlas 2.0 및 ImageJ)에 적용하여 재현성(RSD; %)과 상관성(R²)을 각각 확인 및 비교하였다. 그 결과, 반응 조건에 대한 조정이 필요하였고(반응 온도 등) 각 시료별 2가지의 농도(0.5 mg/mL 및 0.01 mg/mL)에서 반응의 재현성은 0.69~5.50% 범위이었으며 반응(2 µL per spot)의 생성물과 아민의 농도에 대한 상관성은 0.1~0.005 mg/mL의 농도 구간에서 가장 높게 나타났다(R²> 0.9906). 또한, 두 가지 프로그램 모두 재현성과 직선성에 대한 유사한 결과를 나타내어 직접적인 유도체화 반응과 TLC 이미지에 대한 이들 프로그램을 사용한 분석이 아민 화합물에 대한 반정량적인 분석으로 사용될 수 있는 가능성을 보였다.