• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.267-272
• /
• 2001

A FEM-based analytical approach was used to evaluate the static strength and the fatigue strength of a KHST bogie including eddy current brake system. Calculation was carried out in the fields of linearity and small deformation. The yield strengths were used as criteria for evaluating the static strength and the fatigue limits were used as criteria for evaluating the fatigue strength. The analysis results show that there is not any location that exceeds the allowable criteria.

• 대한방사선방어학회:학술대회논문집
• /
• 대한방사선방어학회 2010년도 춘계 학술발표회 및 심포지엄
• /
• pp.166-167
• /
• 2010

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.222-229
• /
• 2001

This paper aims to verify the static strength of a KHST gangway structure including fixed ring and carrying ring according to tile load cases in the defined specification. The structure has been analyzed by the finite element method. Calculation carried out in tile fields of linearity and small deformation. The admissible limit is tile yield strength for the available materials. The analysis results show that Von-Mises stress at some locations of the structure is a little beyond the admissible limit. These results are successfully reflected on the adjusted design.

• Journal of Radiation Protection and Research
• /
• 제31권4호
• /
• pp.181-186
• /
• 2006

본 연구에서는 최근 들어 새롭게 소개되고 있는 유리선량계의 재현성 및 선량의 선형성 그리고 에너지 의존성을 조사하였다. 50개의 유리선량계를 5번 판독한 결과, 재현성은 모두 ${\pm}1.2%$(1SD)이내에서 잘 일치하는 것을 알 수 있었으며 $^{60}Co$ 감마선에서 선량 0.5 Gy부터 50 Gy까지 유리선량계의 반응도를 평가해 본 결과는 0.9998의 선형계수를 확인할 수 있었다. 또한 유리선량계의 에너지의존성은 원통형의 전리함으로 측정한 선량과 비교했을 때 광자선에너지 6, 15 MV 각각에 대해 $^{60}Co$ 감마선의 반응도로 일반화시킨 결과 모두 ${\pm}1.5%$(1SD)이내에서 일치하였다. 이는 고에너지 광자선에 대해 열형광선량계와는 비슷한 결과이며 다이오드 선량계와 비교해서 했을 때는 낮은 에너지 의존성을 가지는 것이다. 따라서 유리선량계는 기존의 다른 선량계에 비해 사용 가능한 선량범위가 넓고 고에너지 광자선에서 에너지의존성이 낮으며 유효크기가 작은 장점 등으로 인해 소조사면의 고선량을 사용하는 방사선 수술분야의 선량측정에 적합한 선량계라는 것을 확인할 수 있었다.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.265-269
• /
• 2008

Output voltage value of AC high voltage source has usually been obtained by measuring the low arm voltage of high voltage divider or the secondary voltage of high voltage transformer. In this study, we have fabricated the AC 400 kV high voltage divider using high voltage electrode and electric field measurement sensor. The dividing ratio of the fabricated 400 kV high voltage divider was evaluated using reference 400 kV capacitive divider. The dividing ratio of 400 kV high voltage divider is found to be 12,322 and has the good linearity within 0.63 % against AC high voltage up to 400 kV. Therefore, the developed 400 kV high voltage divider could evaluate 400 kV high voltage supply and voltage divider used in industry.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.465-473
• /
• 2000

There is no progress in interpreting the correlation between the high school record and the scholastic aptitude test. This study gives the degree of the linearity between the high school record and the scholastic aptitude test by using the method of the individual scholastic evaluation which was proposed by Chung(1999). The limits of the individual scholastic evaluation are pointed out additionally in inferring the promising individuals having the high scores in the scholastic aptitude test so that the individual scholastic evaluation be used as reference materials when the colleges applying the comparative school record in the entrance exams.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.3-9
• /
• 2006

HSM(High-speed Machining) is widely used in rapid manufacturing of precision products and molds of various materials. Improvement in cutting efficiency is one of the important subjects in the HSM process. To analyse the dynamic behavior during a very short cutting time, the computational analysis code, LS-DYNA3D, was employed for the simulation of the mechanism of HSM for aluminium 7075. This cutting mechanism includes some difficult points in simulation, for example, material and geometrical non-linearity, high-speed dynamic impact, contact with friction, etc. In this paper, a finite element model considering the strain rate effect is proposed to predict the cutting phenomena such as chip deformation, strain and stress distributions, which will help us to design the HSM process.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1823-1825
• /
• 2007

Based on Faraday effect, the variation of current flowing through the conductor can be encoded as that of azimuth angle of light polarization propagating through the fiber coil wound onto the conductor. The amount of current can be obtained by measuring the variation of the light intensity transformed from that of the azimuth angle through a polarization analyzer. In this paper we propose a fiber-optic current sensor system that employs a fiber polarization analyzer as a sensor interrogation device. The fiber polarization analyzer was prepared by inscribing a long-period fiber grating on a high birefringent fiber. At the fixed wavelength of 1522.5 nm, the fabricated fiber device has the polarization extinction ratio of more than 25 dB. The measurement of large current up to 600 Arms was accomplished based on a simple fiber interrogation device and the measurement output of the sensor system showed a good linearity.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권5호
• /
• pp.273-278
• /
• 2002

Even though the modulating signal frequency of the light is too high to detect directly, the signal can be extracted by frequency conversion at the same time as the detection by means of the non-linearity of the APD. An analysis is presented for super-high-speed optical demodulation by an APD with electronic mixing. A normalized gain is defined to evaluate the performance of the frequency conversion demodulation. The nonlinear effect of the internal capacitance was included in the small signal circuit analysis. We showed theoretically and experimentally that the normalized gain is dependent on the down converted difference frequency component. In the experiment, the down converted different frequency outputs became larger than the directly detected original signal for the applied local signal of 20㏈m.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.216-219
• /
• 2000

A Ka Band 3-stage MMIC (Monolithic Microwave Integrated Circuits) LNA(Low Noise Amplifiers) has been designed. The MMIC LNA consists of two single-ended type amplication stapes and one balanced type amplication stage to satisfy noise figure characteristics and high gain and amplitude linearity. The 0.15um pHEMT has been used to provide a ultra low noise figure and high gain amplification. Series and Shunt feedback circuits were inserted to ensure high stability over frequency range of DC to 80 GHz. The size of designed MMIC LNA is 3100mm ${\times}$ 2400um(7.44$\textrm{mm}^2$). The on wafer measured noise figure of the MMIC LNA is less than 2.0 dB over frequency range of 22 GHz to 30 GHz.