• 한국응용곤충학회지
• /
• 제46권1호
• /
• pp.153-158
• /
• 2007

콩의 생식생장기에 노린재류의 밀도조사법을 개발하고자 하였다. 타락법, 포충망법 및 달관법으로 콩의 개화기(R2), 결협기(R4) 및 성숙기(R7)에 발생하는 톱다리개미허리노린재, 가로줄노린재, 풀색노린재, 알락수염노린재 및 썩덩나무노린재의 성충과 약충의 밀도를 조사한 결과 노린재류의 총 조사량은 타락법에서 5,214.2마리로 가장 많았으며, 다음은 달관법에서 2,581.8마리 였으며, 포충망법에서 103.1마리로 가장 적었다. 타락법과 달관법에 의한 노린재류의 총 조사량은 가로줄노린재 > 풀색노린재 > 썩덩나무노린재 > 톱다리개미허리노린재 > 알락수염노린재의 순서로 많았고, 발생량의 차이도 분명하였으나, 포충망법에 의한 노린재류의 총 조사량은 18-23마리로 발생량의 차이가 분명하지 않았다. 따라서 타락법에 의한 주요 노린재류의 조사밀도는 톱다리개미허리노린재 성충을 제외하곤 대체로 높았다. 하지만 타락법보다 불출법으로 콩의 개화시부터 성숙까지 톱다리개미허리노린재의 성충을 더 많이 조사할 수 있었고, 일중 조사량은 오후시간대보다 오전시간대에 많았다. 그러므로 콩포장에서 노린재류의 밀도조사법으로 톱다리개미허리노린재는 불출법으로, 가로줄노린재, 풀색노린재, 알락수염노린재 및 썩덩나무노린재는 타락법이 추천되었다. 이러한 2가지 조사법의 적용은 노린재류의 종간 행동적 특성 차이 때문이다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.118-119
• /
• 2006

The development of Fe-based metal matrix composites (MMCs) with high content of hard phase has been approached by combining the use of advanced powder metallurgy techniques like high-energy milling (HEM), cold isostatic pressing (CIP) and vacuum sinterings. A 30% vol. of NbC particles was mixed with Fe powder by HEM in a planetary mill during 10h, characteristing the powder by the observation of morphology and microstructure by scanning electron microscopy (SEM). After of sintering process the variation of density, hardness,carbon content and the microstructural changes observed, permits to find the optimal conditions of processing. Afterwards, a heat treatment study was performed to study the hardenability of the composite.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1415-1421
• /
• 2018

Unlike ordinary organic field-effect transistors (OFETs), saturation current is hardly to be found in vertical OFETs (VOFETs). Moreover, the fabrication process of patterned sourced for VOFETs is quite complex. In this current work, a simple solution processed VOFET with directly deposited intermediate silver source electrode has been demonstrated. The VOFET exhibits a high leakage current that induces an inversion polarity of its transistor behavior. Interestingly, a well-defined saturation current was observed in the linear scale of transfer characteristic. The VOFET operated with high-current density > $280mA/cm^2$ at $V_d=5V$. Overview potential of the fabricated device in display application is also presented. This preliminary work does open-up a new direction in VOFET fabrication and their application.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.267-273
• /
• 2001

In this study, welding phenomena involved in formation of penetrators during high frequency electric resistance welding were investigated. High speed cinematography of the process revealer that a molten bridge between neighboring skelp edges forms at apex point and travels along narrow gap toward to welding point at a speed ranging from 100 to 400 m/min. The bridge while moving along the narrow gap swept away oxide containing molten metal from the gap, providing oxide-free surface for a forge-welding at upsetting stand frequency of the budge formation, travel distance and speed of the bridge were affected by the heat input rate into strip. The travel distance and its standard deviation were found to have a strong relationship with the weld defect density. Based on the observation, a new mechanism of the penetrator formation during HF ERW process is proposed.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.640-648
• /
• 2004

This paper describes a new magnetization method for non-destructive testing with magneto-optical sensor (denoted as MO sensor) which have the following characteristic : high observation sensitivity, independence of the crack orientation, and precise imaging of a complex crack geometry such as multiple cracks. When a magnetic field is applied normally to the surface of a specimen which is significantly larger than its defects, approximately the same magnetic charge per unit area occurs on the surface of the specimen. If there is a crack in the specimen, magnetic charge per unit area has the same value at the bottom of the crack. The distribution of the vertical component of the magnetic flux density, B$\_$Z/, is almost uniform over the no-crack area (denoted as B$\_$Z,BASE/), while the magnetic flux density is smaller in the surroundings of the crack(denoted as B$\_$Z,CRACK/) If B$\_$Z, BASE/ is a bit larger than the saturated magnetic flux density of the MO sensor (B$\_$s/) , then small magnetic domains occur over the crack area and a large domain over the non-crack area because B$\_$Z,CRACK/ is smaller than B$\_$s/.

• 한국세라믹학회지
• /
• 제29권6호
• /
• pp.419-430
• /
• 1992

Fabrication possibility of low-shrinkage alumina without oxidation and wetting agent was presented on the basis of observation about oxidation behavior, microstructure and physical characteristics of such reaction agents free Al2O3-Al system. The composition less than Al 10w/o where Al can act as a sintering agent for Al2O3 was excluded. Under the condition of present experiments oxidation of Al2O3-Al system was dependent not on holding time but mainly on oxidation temperature. In thes case of Al powder not comminuted effectively during powder mixing of Al2O3-Al, columnar structure which would act as a hindrance to the densification during sintering developed more during oxidation with higher Al contents, and which made the fabrication of low-shrinkage Al2O3 ceramics impossible. If Al powder was comminuted effectively due to co-mixed Al2O3 characteristics, densification was improved because of no columnar structure and made the fabrication of sintered body with -2.7% dimensional change and 81% relative density possible. As a result, it is possible to fabricate dense low-shrinkage Al2O3 ceramics without oxidation and wetting agent under conditions such as smaller particle size of Al, Al contents below 50v/o, higher green density of Al2O3-Al compact and the use of Al2O3 powder used for high-density ceramics.

• ETRI Journal
• /
• 제38권3호
• /
• pp.579-588
• /
• 2016

To improve the ability to determine a vehicle's movement information even in a challenging environment, a hybrid approach called non-Gaussian square rootunscented particle filtering (nGSR-UPF) is presented. This approach combines a square root-unscented Kalman filter (SR-UKF) and a particle filter (PF) to determinate the vehicle state where measurement noises are taken as a finite Gaussian kernel mixture and are approximated using a sparse Gaussian kernel density estimation method. During an outage-free GPS period, the updated mean and covariance, computed using SR-UKF, are estimated based on a GPS observation update. During a complete GPS outage, nGSR-UPF operates in prediction mode. Indeed, because the inertial sensors used suffer from a large drift in this case, SR-UKF-based importance density is then responsible for shifting the weighted particles toward the high-likelihood regions to improve the accuracy of the vehicle state. The proposed method is compared with some existing estimation methods and the experiment results prove that nGSR-UPF is the most accurate during both outage-free and complete-outage GPS periods.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권2호
• /
• pp.110-117
• /
• 2000

Relationship between monoclonal antibody (MAb) productivity and growth rate, and effects of high cell density on MAb production rate increased with increasing specifis growth rate in both suspended and immobilized continuous cultures indicate a positively growth-associated relationship between MAb productivity and growth rate. moreover, the specific production rate was higher in the immobilized cell culture than that in suspended one at all dilution rates. In order to clarify these phenomana, MAb mPNA experession and cell cycle distribution were investigated in bacth cultures with immobilized cells and suspended cells. RT-PCR was used for observation of MAb mRNA expression and a two-color bromodeoxyuridine (BrdU)/propidium iodide (PI) flow cytometry method for determination of cell cycle distribution. The results revealed that MAb nRNA expression until dead phase, which was longer than in suspended cell. The cell cycle distribution patterns were observed almost the same for both immobilized and suspended cells. Such results may imply that a high cell density state has positive influence on the mRNA expression and on growth-associated Mab productivity of T0405 cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.35-37
• /
• 2007

Super resolution using stochastic approach which based on the Bayesian approach is to easy modeling for a priori knowledge. Generally, the Bayesian estimation is used when the posterior probability density function of the original image can be established. In this paper, we introduced the improved MAP algorithm based on Bayesian which is stochastic approach in spatial domain. And we presented the observation model between the HR images and LR images applied with MAP reconstruction method which is one of the major in the SR grid construction. Its test results, which are operation speed, chip size and output high resolution image Quality. are significantly improved.

• 박물관보존과학
• /
• 제2권
• /
• pp.27-34
• /
• 2000

다호리 출토 목재의 수종은 전체 24점 모두 활엽수 8종류로 상수리나무류(37.7%), 밤나무(8.3%), 벚나무속(8.3%), 감탕나무속(4.1%), 오리나무류(25%), 산복사류(4.1%), 느티나무(4.1%), 물푸레나무속(8.3%)으로 식별되었다. 출토목재의 물리적 특성은 현생재에 비해 높은 함수율과 수축율 그리고 현저한 밀도 감소를 나타내었다. 분해상태는 편광현미경 관찰결과 현생재에 비해 모든 출토목재의 도관을 제외한 나머지 부분에서 복굴절현상 감소가 뚜렷하게 나타났으며 주사전자현미경 관찰에서는 목섬유의 2차 세포벽을 포함한 구성조직이 현저하게 분해되었다. 분해가 많이 된 목재는 개방성이 확대되어 약제의 침투·확산이 용이하므로 처리기간이 짧고, PEG#4000(MW:3,350)을 적용한 고분자약제 함침처리가 유리하며 고농도의 함침 처리가 요구된다.