• Journal of Nutrition and Health
• /
• v.31 no.4
• /
• pp.716-728
• /
• 1998

To investigate the effect of dietary Ca levels on metabolic changes of Ca and skeleton in postmenopausal women, 10-month-old ovariectomized female rats were compared with 2 month old rats. The rats were fed either 0.2% or 1.2% Ca diets for 16 weeks. Food intake and weight gain as higher in rats fed high Ca diets and in ovariectomized rats. Apparent Ca absorption as higher, and Ca balance was lower in the low Ca groups. Vertebrae density was higher in old rats or those fed a high Ca diets. The old rats and ovariectomized rats showed decreased bone formation, increased bone resorption and kidney function deterioration resulting in increased urinary Ca excretion. Contradictory to the above observation, old rats and ovariectomized rats still showed higher bone mass and bone ash content. Therefore aging was not fully onging in 10-month-old rats. Bone weights, mineral contents, and mineral/wt ratio were lower in ovariectomized rats. Dietary Ca level did not affect urinary Ca excretion, urinary protein excretion, GFR, serum alkaline phosphatase, or urinary hydroxyporline excretion. This means that dietary Ca level did not influence kidney function or bone turnover. However Ca content and the ash content of femur, 4th vertebra, and scapula were increased in high Ca groups. Therefore, it is considered that decreased bone formation and accelerated bone resorption may account for the increased osteoporotic risk in women in menopause after middle age. However, Ca metabolism can be improved and bone components can be maintained if Ca is supplemented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.843-846
• /
• 2004

Cavity tone is generated due to the feedback between flow and acoustic wave. It is recognized that the period is determined by the time required for the flow convection in one direction, the time required for the acoustic propagation in the other direction and the time for phase shift depending on the flows and mode. Most of the phenomena have been investigated by experiments and a simple but fundamental theory. But the cause of the phase shift and the correctness of the theory have not been clearly explained so far. In this paper, the phenomena are calculated numerically to obtain detail information of flow and acoustic wave to explain the mechanism including the phase. High order high resolution scheme of optimized high order compact is used to resolve the small acoustic quantities and large flow quantities at the same time. The data are reduced using cross correlation function in space and time and cross spectral density function which has phase information. Abrupt change in pressure near corner in cavity is observed and is relate to phase variation. The time required for the feedback between the flow and acoustic wave is calculated after the numerical simulation f3r various modes. The periods based on the time calculated using the above method and direct observation from the acoustic waves generated and propagated in the numerical simulation are compared. It is found that no phase shift is required if we examine the time required carefully. Rossiter's formula for the cavity tone used for quick estimation needs to be modified far some modes.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4E
• /
• pp.146-155
• /
• 2002

We present a new technique for achieving source separation when given only a single charmel recording. The main idea is based on exploiting the inherent time structure of sound sources by learning a priori sets of time-domain basis functions that encode the sources in a statistically efficient manner. We derive a learning algorithm using a maximum likelihood approach given the observed single charmel data and sets of basis functions. For each time point we infer the source parameters and their contribution factors. This inference is possible due to the prior knowledge of the basis functions and the associated coefficient densities. A flexible model for density estimation allows accurate modeling of the observation, and our experimental results exhibit a high level of separation performance for simulated mixtures as well as real environment recordings employing mixtures of two different sources. We show separation results of two music signals as well as the separation of two voice signals.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.4
• /
• pp.158-161
• /
• 2013

Recently, the weight reduction and miniaturization of the electronics have placed great emphasis. The miniaturization of PCB (Printed Circuit Board) as main component among the electronic components has also become progressed. The use of acid copper plating process for Via-Filling effectively forms interlayer connection in build-up PCBs with high-density interconnections. However, in the case of copper-via filled in a bath, which is greatly dependent on the effects of additives. This paper discusses effects of Cl ion on the filling of PCB vias with electrodeposited copper based on both electrochemical experiment and practical observation of cross sections of vias.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.82-82
• /
• 2014

One of the subjects in clouds' structure and development is small scale structure of interstellar cloud. The possibility of AU scale structure (Marscher et al. 1993; Moore & Marscher 1995; Roy et al. 2012) is discussed, and this small scale structure is considered as the result of hydrogen volume density (Moore & Marscher 1995), or small-scale chemical and other inhomogeneities (Liszt & Lucas 2000). In order to study this subject with emission line, extremely high resolution is mandatory by VLBI system. However, the alternative method could be observing the absorption line of interstellar cloud on the continuum object. In this case, the resolution would be restricted to the size of the continuum object, if the size of the object is smaller than the resolution of a used telescope. We observed the previous researchers' three objects (BLLAC, NRAO150, B0528+138), whose spectrums are changed from 1993 to 1998 (Liszt & Lucas 2000), with KVN. Through KVN observation, we found the changes of optical depth spectrum compared with the previous spectrums. We will discuss the optical depth spectrum variation by time variation and the meaning of it.

• Journal of the Korean institute of surface engineering
• /
• v.15 no.2
• /
• pp.69-76
• /
• 1982

With a view to manufacturing membranes for separation of gas mixtures, Al foils were anodized in a 2% oxalic-acid electrolyte at 40V and 80V. When anodizing was completed and Barrier layer existed at the extreme back site of the foil, the anodized foil was made to react with only electrolyte, with switching off the electric power. When the size and density of pores were changed through voltage change, the membr-anes did not show large difference in the permeability. Reacting with electrolyte, the existing Barrier layer turns into porous layer. During this process, several small pores grow from one relatively large pore, getting to the back site. The number and size of the small pores getting to the back surface increase as time passing. This change of Barrier layer into porous layer is thought to be directly related to the permeability change of the membranes. The selectivity of an anodized Al membrane was not related to the voltage change, and was high, being similar to the theoretical selctivity of metallic membranes, according to my observation.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.146-146
• /
• 2002

We present a new technique for achieving source separation when given only a single channel recording. The main idea is based on exploiting the inherent time structure of sound sources by learning a priori sets of time-domain basis functions that encode the sources in a statistically efficient manner. We derive a learning algorithm using a maximum likelihood approach given the observed single channel data and sets of basis functions. For each time point we infer the source parameters and their contribution factors. This inference is possible due to the prior knowledge of the basis functions and the associated coefficient densities. A flexible model for density estimation allows accurate modeling of the observation, and our experimental results exhibit a high level of separation performance for simulated mixtures as well as real environment recordings employing mixtures of two different sources. We show separation results of two music signals as well as the separation of two voice signals.

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.15-20
• /
• 1994

The effect of SiC addition on sintering behaviors and microstructures of TiB2 ceramics were studied. The sintering of TiB2 was limited due to the surface diffusion and rapid grain growth at high temperature. However the addition of SiC to TiB2 ceramics improved the densification to above 99% of the theoretical density. The sintering of TiB2-SiC composite starts at 120$0^{\circ}C$ with the melting of the oxides in particle surface as impurities. After the reduction of the oxide by additional cabon at above 140$0^{\circ}C$, the grain boundary diffusion through the interface of TiB2-SiC play an important role. TEM observation showed neither chemical reactions nor other phases formed at the TiB2-SiC interfaces but the microcracks were observed due to the mismatch of thermal expansion between TiB2-SiC.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2409-2413
• /
• 2007

Time resolved phosphorescence of Dibromobenzophenone (DBBP) choleic acid crystal was observed at 4.2 K as functions of excitation energy and delay time. The experimental results reveal that the energy transfer efficiency is dependent on the excitation energy, i.e. the density of acceptors sites. As the excitation energy or delay time increases, the resonance phosphorescence does not broaden and shift gradually, rather a broad luminescence band develops about 290 cm?1 to lower energy of the resonance phosphorescence. The observation implies that energy transfer from high to low energy sites in this system is controlled by emission of phonons or vibrons. The data of time resolved experiments were analyzed in terms of a mechanism involving direct donor-acceptor excitation transport by exchange coupling. It was concluded that an isotropic twodimensional exchange interaction topology is consistent with energy transfer in this system.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.267-270
• /
• 2001

The adsorption of chlorine on a Pt(111) surface at 90 K has been studied using scanning tunneling microscopy (STM) in ultra-high vacuum environments. The adsorbed chlorine atoms give rise to two different ordered structures, (3${\times}$3)-Cl and c(4${\times}$2)- Cl, depending on the coverage. It has been determined from the STM image that the absolute coverage of (3${\times}$3)-Cl structure is 0.44, which is not in agreement with coverage calibrated by a low energy electron diffraction technique together with an Auger electron spectrometer and a thermal desorption spectrometer. The Cl atoms bound to on-top sites at the Pt(111)(3${\times}$3)-Cl surface appeared to effectively perturb the density of states of Pt atoms, as compared with that bound to bridging sites. The other ordered structure, c(4${\times}$2)-Cl, with small domain sizes, consists of both on-top and bridge-bonded species with a saturation coverage of 0.5.