• 전기학회논문지
• /
• 제59권5호
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• ETRI Journal
• /
• 제45권6호
• /
• pp.974-981
• /
• 2023

This paper presents a transition-limited pulse-amplitude modulation (TLPAM) signaling method to enable a high data rate and robust wireline communications. TLPAM signaling addresses the impact of high intersymbol interference (ISI) ratios in conventional M-ary PAM signaling methods by limiting the maximum voltage transition level between adjacent symbols. The implementation of a TLPAM signaling encoder is realized by setting back the most significant bits (MSBs) in the queue. The correlation between TLPAM's maximum transition level, effective data rate, and eye width/height is analyzed with various channel loss parameters, followed by characterization and measurement results with a realistic channel setup. The analysis and experimental results reveal the effectiveness of the proposed TLPAM signaling scheme for achieving a high data rate with minimal interference.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.262-266
• /
• 2011

In high data-rate communication systems, encryption/decryption must be processed in high speed. In this paper, we implement CCM security mode which is the basis of security. Specifically, we combine CCM with AES block encryption algorithm in hardware. With the combination, we can carry out encryption/decryption as well as data transmission/reception simultaneously without reducing data-rate, and we keep low-power consumption with high speed by optimizing CCM block.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.559-568
• /
• 2013

We report on the first error-free terahertz (THz) wireless communication at 0.310 THz for data rates up to 8.2 Gbps using a 18-GHz-bandwidth GaAs/AlGaAs field-effect transistor as a detector. This result demonstrates that low-cost commercially-available plasma-wave transistors whose cut-off frequency is far below THz frequencies can be employed in THz communication. Wireless communication over 50 cm is presented at 1.4 Gbps using a uni-travelling-carrier photodiode as a source. Transistor integration is detailed, as it is essential to avoid any deleterious signals that would prevent successful communication. We observed an improvement of the bit error rate with increasing input THz power, followed by a degradation at high input power. Such a degradation appears at lower powers if the photodiode bias is smaller. Higher-data-rate communication is demonstrated using a frequency-multiplied source thanks to higher output power. Bit-error-rate measurements at data rates up to 10 Gbps are performed for different input THz powers. As expected, bit error rates degrade as data rate increases. However, degraded communication is observed at some specific data rates. This effect is probably due to deleterious cavity effects and/or impedance mismatches. Using such a system, realtime uncompressed high-definition video signal is successfully and robustly transmitted.

• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.205-210
• /
• 2011

High data-rate underwater communications is demanded. This demand imposes stringent requirements on underwater communication equipment of phase-locked-loop (PLL). Phase noise in PLL is unwanted and unavoidable. In this paper, we investigate the PLL phase noise effect on high order QAM for underwater communication systems. The phase noise model using power spectral density is adopted for performance evaluation. The phase noise components considered in PLL are reference oscillator, voltage controlled oscillator (VCO), filter and divider. The filters in PLL noise are assumed to be second order active and passive low pass filters. Through simulation, we analyze the phase noise characteristics of the four components and then investigate the performance improvement factor of each component. Consequently, we derive specifications of VCO, phase detector, divider to meet performance requirement of high data-rate communication using QAM under phase noise influence.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.179-184
• /
• 2012

기존의 무선 RF 통신은 근거리에서 전력손실이 상대적으로 크고, 전파간섭 및 방해, 재밍 등에 민감하다. 이러한 단점을 보완하는 대안으로 자외선을 이용한 통신 방식에 대한 연구가 최근 관심을 받고 있다. 본 논문에서 자외선을 이용한 비가시거리 통신의 data rate 특성에 대해 시뮬레이션한 결과를 제시하였다. On-off keying 방식을 사용하는 비가시거리 자외선 통신에서 data rate는 송신 빔의 방향, 수신빔의 빔 폭, 송신 전력에 의해 큰 영향을 받는다는 것을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.276-282
• /
• 2016

A 2 Gbit/s visible-light communication (VLC) scheme using time-frequency color-clustered (TFCC) multiple-input multiple-output (MIMO) based on blue, cyan, yellow, and red (BCYR) light-emitting diodes (LEDs) is presented. In the proposed scheme, BCYR LEDs are employed to form four different color clusters. Data transmission using the four color clusters is performed in MIMO, so that the scheme achieves a very high speed of data transmission. Moreover, the scheme employs the TFCC strategy to yield high performance in terms of bit error rate (BER). TFCC operates in such a way that the original data and the two delayed versions of the data are multiplied by orthogonal frequencies and then transmitted using a specific color of the BCYR LED. In the receiver, color filters are employed to detect the data transmitted from the desired cluster. Selection combining (SC) is also performed to yield a diversity effect within each color cluster, to further improve the performance. Performance evaluation demonstrates that the proposed TFCC MIMO VLC offers a data rate of 2 Gbit/s and a bit error rate of 4×10^-5, at an E_b/N_o value of merely 3 dB.

• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.20-25
• /
• 2012

천리안 위성은 해양 관측과 기상영상 전송, 그리고 Ka 대역 위성통신 신호 중계를 위한 다목적 복합위성으로 2010년 발사되어 운용되고 있다. Ka 대역 위성통신 중계기는 MSM 스위치 기능으로 다중 빔 지향이 가능하고 다중모드 고속 데이터를 전송할 수 있다. 천리안 위성통신 중계기는 MSM 기능으로 다수의 신호발생기와 Ka 대역의 주파수 사용으로 시스템 위상잡음이 증가할 수 있다. 위상잡음은 다중모드 및 고속 데이터 전송에 영향을 미치고 있으며, 높은 위상잡음을 갖는 위성 전송시스템은 전송 신호를 복원하기가 어렵다. 본 논문에서는 천리안 위성통신중계기의 위상잡음을 측정하고, 측정된 위상잡음을 수신 잡음대역폭 관점에서 위상잡음 영향을 분석하고 평가한다. 아울러, 천리안 위성통신 중계기 위상잡음에 대한 다중모드 및 고속 전송 데이터의 전송 성능을 평가한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.335-338
• /
• 2002

For high data rate transmission over wireless fading channels, space-time trellis ceding techniques can be employed to increase the Information capacity of the communication system dramatically. In this paper, we consider the concatenated space time LDPC (Low Density Parity Check) codes. Extra ceding gains In addition to the diversity advantage is shown to be achieved for certain space-time trellis codes transmitted over quasi-static lading channels.

• 대한전자공학회논문지TC
• /
• 제49권8호
• /
• pp.58-64
• /
• 2012

다중 사용자가 존재하는 실내 통신 시스템에서 데이터 고속 전송이 가능하도록 간섭을 최소화 시키는 이중 시역전 전처리 필터를 제안한다. 기존 시역전 필터는 간섭을 완벽히 제거하지 못해서 심볼의 전송 간격이 좁아지게 되는 경우 성능열화가 심각하게 나타나게 된다. 그러나 제안하는 기법은 간섭을 최소화 하는 것을 목표로 하였기 때문에 추가적인 필터 설계를 통해 성능 열화 없이 고속 데이터 전송을 실현하고 송신기가 수신기의 복잡도 부담을 덜어주는 이점이 있다. 실험 결과에서는 데이터 전송률이 높아질수록 제안하는 기법의 성능이 향상되는 것을 볼 수 있다.