• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.317-324
• /
• 2010

Metal-supported solid oxide fuel cells (SOFCs) have been developed to commercialize SOFCs. This new type of SOFC has high mechanical strength, but its mass transfer rate may be low due to the presence of a contact layer. In this study, the mass transfer characteristics of an anode-supported SOFC and a metal-supported SOFC are studied by performing numerical simulation. Governing equations, electrochemical reactions, and ceramic physical-property models are determined simultaneously; molecular diffusion and Knudsen diffusion are considered in mass transport analysis of porous media. The experimental results are compared with simulation data to validate the results of numerical simulation. The average current density of the metal-supported SOFC is 23% lower than that of the anode-supported SOFC. However, because of the presence of the contact layer, the metal-supported SOFC has a more uniform distribution than the anode-supported SOFC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.10-17
• /
• 2007

It opens a new horizon on spintronics for the potential application of MTJ as a universal logic element, to employ the magneto-logic in substitution for the transistor-based logic device. The magneto-logic based on the MTJ element shows many potential advantages, such as high density, and nonvolatility. Moreover, the MTJ element has programmability and can therefore realize the full logic functions just by changing the input signals. This magneto-logic using MTJ elements can embody the reconfigurable circuit to overcome the rigid architecture. The established magneto-logic element has been designed and fabricated on a triple-layer MTJ. We present a novel magneto-logic structure that consists of a single layer MTJ and a current driver, which requires less processing steps with enhanced functional flexibility and uniformity. A 4-bit gray counter is designed to verify the magneto-logic functionality of the proposed single-layer MTJ and the simulation results are presented with the HSPICE macro-model of MTJ that we have developed.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.121-130
• /
• 1993

The GaP crystals were grown by synthesis solute diffusion method and its properties were investigated. High quality single crystals were obtained by pull-down the crystal growing ampoule with velocity of 1.75mm/day. Etch pits density along vertical direction of ingot was increased from 3.8 ${\times}{10^4}$c$m^{-2}$ of the first freeze to 2.3 ${\times}{10^5}$c$m^2$ of the last freeze part. The carrier concentration and mobilities at room temperature were measured to 197.49cc$m^2$/V.sec and 6.75 ${\times}{10^{15}}$c$m^{-3]$, respectively. The temperature dependence of optical energy gap was empirically fitted to $E_g$(T)=[2.3383-(6.082${\times}{10^{-4}}$)$T^2$/(373. 096+TJeV. Photoluminescence spectra measured at low temperature were consist with sharp line-spectra near band-gap energy due to bound-exciton and phonon participation in band edge recombination process. Zn-diffusion depth in GaP was increased with square root of diffusion time and temperature dependence of diffusion coefficient was D(Tl = 3.2 ${\times}{10^3}$exp( - 3.486/$k_{\theta}$T)c$m^2$/sec. Electroluminescence spectra of p-n GaP homojunction diode are consisted with emission at 630nm due to recombination of donor in Zn-O complex center with shallow acceptors and near band edge emission at 550nm. Photon emission at current injection level of lower than 100m A was due to the band-filling mechanism.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.982-990
• /
• 2019

The interest of researchers and governments in exploiting tidal energy resources is increasing. Jangjuk strait is a place with high tidal energy density potential and is therefore appropriate for the constructing of a tidal turbine farm. In this study, a numerical approach is presented to evaluate the current flow and power potential in Jangjuk strait with an ADCIRC model. Then, the tidal field characteristics are utilized as input parameters for tidal resource calculation with an in-house program. The 1 MW scale tidal energy converter devices are employed and arranged in 4 layouts to investigate the annual energy yield as well as flow deficit due to the wake ef ect at the surveyed area. The best-performed array generates an annual energy yield up to 12.96 GWh/year (without considering the wake effect); this value is reduced by 0.16 GWh/year when accounting for the energy loss caused by the flow deficit. Moreover, by altering the turbine yaw angle during the flood and ebb tides, the impacts of this factor on the energy extraction are analyzed. This indicates that the turbine array attains the maximum tidal power when the turbine yaw angle is at 346° and 164° (clockwise, to the North) for the spring and neap tide in turns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1176-1187
• /
• 2014

In Contemporary residential area, especially apartment commplex, crime affect the quality of life and sustainability of cities. So our interest is an all-time high in the role that planning processes and the design of the physical environment can play in reducing the opportunity for crime. The purpose of this study try to find the possibility of application of CPTED in Urban Apartment Complex. Recently, as increase of residencial density, diverse and new types of crime are increasing in urban apartment complex. It is the current of times which demand our serious consideration. This research focused on crime reduction through the physical environmental control methods. And the concepts and contents of CPTED are studied and the case studies of developed countries are surveyed. For groping in the practical application, researched into the case study of apartment blocks in medium sized city, Cheongju. Also Local crime prevention initiatives require partnership working, both between professionals and with local communities. The result of this study has implicated, increasing importance on daily safety issue in urban life and examining the possibility of applying crime prevention and reduction program and systems.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.453-462
• /
• 1995

In connection with the safe storage of high level nuclear waste, effect of $H_2O$$_2$ on the corrosion behavior of 304L stainless steel was examined. Open circuit potentials and polarization curves were measured with and without $H_2O$$_2$. The experimental results show that $H_2O$$_2$ increased corrosion potential and decreased pitting potential. The passive range, therefore, decreased as $H_2O$$_2$ concentration increased, indicating that pitting resistance was decreased by the existence of $H_2O$$_2$ in the electrolyte. These effect of $H_2O$$_2$ on corrosion of 304L stainless steel are considered to be similar to those of ${\gamma}$-irradiation. To compare the effects of $H_2O$$_2$ with those of $O_2$, cathodic and anodic polarization curves ore made in three types of electrolyte such as aerated, deaerated, and stirred electrolyte. The experimental results show that the effects of $H_2O$$_2$ on the corrosion behavior were tory similar to those of $O_2$ such as increase of corrosion potential, decrease of pitting resistance, and increase of repassivation potential. In acid and alkaline media, the corrosion potential shifts by $H_2O$$_2$ were restricted by the large current density of proton reduction and by the le Chatelier's principle respectively.y.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.2
• /
• pp.99-106
• /
• 2002

Objective : Until now, there have been no evidence-based guidelines produced for the mass screening of hyperlipidemia cases in Korea. This study was done to find the most efficient strategy for a hyperlipidemia-screening program among Korean adults, Method : Seven alternative strategies for hyperlipidemia screening were formulated and compared ir terms of cost-effectiveness. Cost and effectiveness were estimated from social perspectives and using a two-stage screening process (initial testing and additional testing for positives from the first test). A computerized database (based on persons who had visited a health promotion center in one teaching hospital for a routine health check-up) was used to determine the cost and the outcome of various strategies. Official data was used in calculating direct and indirect costs. Effectiveness was measured according to the number of persons who needed clinical intervention for hyperlipidemia. A stratified analysis, considering age group and sex, was then done. Sensitivity analyses, focusing on several uncertain parameters, were also done. Results : Of the seven test alternatives available, the most cost-effective strategy was a screening program, which consisted of an initial test of total cholesterol, high-density lipoprotein cholesterol and triglyceride. There was some variation in the rank of the cost-effectiveness ratios for the seven alternatives dependent on age group or gender. Conclusions : Current hyperlipidemia screening practice, for National Health Insurance beneficiaries, tests only the total cholesterol level with a cut-off value of 260mg/dl as an initial screening test. It is not the best strategy for cost-effectiveness, and should be modified. Different screening strategies taking age group and sex into account should be developed and used for the efficient mass screening of hyperlipidemia cases among Korean adults.

• Journal of Nutrition and Health
• /
• v.39 no.2
• /
• pp.160-170
• /
• 2006

This study was conducted to provide foundation data for making health care policy for married women by assessing the dietary intake between highly educated married, employed and unemployed women. It is a direct interview, cross-sectional study with 24-hour recall method for one day. In selecting the subjects for this study, married, unemployed women were selected from a certain area (Daedeok Science Town) in Daejeon where there are high rates of highly educated women, and the married, employed women were selected from the teaching profession in order to avoid confounding due to including a variety of jobs. According to the Korean Standard Classification of Occupations, teaching is the representational occupation of highly educated, married women. Then, to prevent confounding due to age, we selected the subjects out of each age group at the same rate through random sampling. Women who had not graduated college, worked only part-time, or had no current spouse were excluded. As a result, 486 highly-educated, married, unemployed (250) and employed (236) women were used for analyzing data. The unemployed women consumed a higher amount of fat, cholesterol, sodium, vitamin C and folic acid while the employed women consumed a higher amount of iron, vitamin $B_l$ and vitamin $B_2$. P/M/S ratio being 1/1.18/1.05 and 1/1.05/0.87, for the unemployed women and the employed women, respectively, unemployed respondents had a higher saturated fat intake than those of employed. It is in excess of the standard ratio (1/1/1) of the Korean RDA. At the same time, in unemployed respondents the percent of energy intake from fat (24.8%, 23.2%) and animal fat (12.4%, 11.4%) were higher than those of employed respondents. The mean daily nutrient intake of calcium, zinc, and iron for both groups of respondents were lower than the Korean RDA. Both groups had phosphorus as the highest nutrient and calcium as the lowest nutrient of INQ (Index of Nutritional Quality) while nutrients with the INQ being less than 1 were calcium and iron. To sum up, the following conclusions can be made: Nutrition education and guidance for reduction of the intake of fat, especially animal fat, are necessary for unemployed women. In addition, highly educated, married, unemployed and employed women should increase the consumption of foods rich in iron and calcium to prevent anemia and osteoporosis, while decreasing the intake of phosphorus to balance proportions of calcium and phosphorus.

• Genes and Genomics
• /
• v.40 no.11
• /
• pp.1249-1258
• /
• 2018

The Jeju horse is an indigenous Korean horse breed that is currently registered with the Food and Agriculture Organization of the United Nations. However, there is severe lack of genomic studies on Jeju horse. This study was conducted to investigate genetic characteristics of horses including Jeju horse, Thoroughbred and Jeju crossbred (Jeju${\times}$Thoroughbred) populations. We compared the genomes of three horse populations using the Equine SNP70 Beadchip array. Short-range Linkage disequilibrium was the highest in Thoroughbred, whereas $r^2$ values were lowest in Jeju horse. Expected heterozygosity was the highest in Jeju crossbred (0.351), followed by the Thoroughbred (0.337) and Jeju horse (0.311). The level of inbreeding was slightly higher in Thoroughbred (-0.009) than in Jeju crossbred (-0.035) and Jeju horse (-0.038). $F_{ST}$ value was the highest between Jeju horse and Thoroughbred (0.113), whereas Jeju crossbred and Thoroughbred showed the lowest value (0.031). The genetic relationship was further assessed by principal component analysis, suggesting that Jeju crossbred is more genetically similar to Thoroughbred than Jeju horse population. Additionally, we detected potential selection signatures, for example, in loci located on LCORL/NCAPG and PROP1 genes that are known to influence body. Genome-wide analyses of the three horse populations showed that all the breeds had somewhat a low level of inbreeding within each population. In the population structure analysis, we found that Jeju crossbred was genetically closer to Thoroughbred than Jeju horse. Furthermore, we identified several signatures of selection which might be associated with traits of interest. To our current knowledge, this study is the first genomic research, analyzing genetic relationships of Jeju horse, Thoroughbred and Jeju crossbred.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.559-564
• /
• 2019

Hierarchical $ZnCo_2O_4$ hollow nanofibers were prepared by electrospinning and subsequent heat-treatment process. The spinning solution containing polystyrene (PS) nanobeads was electrospun to nanofibers. During heat-treatment process, PS nanobeads in the composite were decomposed and therefore generated numerous pores uniformly in the structure, which facilitated the heat transfer and gas penetration into the structure. The resulting hierarchical $ZnCo_2O_4$ hollow nanofibers were applied as an anode material for lithium-ion batteries. The discharge capacity of the nanofibers was $815mA\;h\;g^{-1}$ ($646mA\;h\;cm^{-3}$) after the 300th cycle at a high current density of $1.0A\;g^{-1}$. However, $ZnCo_2O_4$ nanopowders showed the discharge capacity of $487mA\;h\;g^{-1}$ ($450mA\;h\;cm^{-3}$) after 300th cycle. The excellent lithium ion storage property of the hierarchical $ZnCo_2O_4$ hollow nanofibers was attributed to the synergetic effects of the hollow nanofiber structure and the $ZnCo_2O_4$ nanocrystals composing the shell. The hierarchical hollow nanofiber structure introduced in this study can be extended to various metal oxides for various applications, including energy storage.