• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.72-75
• /
• 2012

본 논문에서는 무선전력전송을 위한 고효율 DC-AC 변환 회로를 구현하였다. DC-AC 변환 회로는 발진기와 전력증폭기를 결합시켜 구현하였다. 전력증폭기의 전력 효율은 무선전력전송 송신 시스템의 효율에 크게 영향을 주기 때문에 Class-E 증폭구조를 이용하여 고효율 전력증폭기를 구현하였다. 또한, 전력증폭기의 입력 단에 연결되는 발진기의 출력 전력이 작기 때문에 높은 출력의 DC-AC 변환 회로를 구현하기 위하여 구동 증폭기를 이용한 고이득 이단 전력증폭기를 구현하였다. 고이득 고효율 이단 Class-E 전력증폭기의 입력 단에 발진기를 연결하여 고효율 DC-AC 변환 회로를 구현하였다. 13.56MHz의 2차, 3차 고조파 성분을 억제하기 위해 이중대역 저지 필터를 설계하여 결합하였다. DC-AC 변환 회로의 출력 전력과 변환 효율은 13.56 MHz에서 40 dBm과 80.2 %이다.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1386-1392
• /
• 2009

An analysis is presented for super-high-speed optical demodulation by an avalanche photodiode(APD) with electric mixing. A normalized gain is defined to evaluate the performance of the optical mixing detection. Unlike previous work, we include the effect of the nonlinear variation of the APD capacitance with bias voltage as well as the effect of parasitic and amplifier input capacitance. As a results, the normalized gain is dependent on the signal frequency and the frequency difference between the signal and the local oscillator frequency. However, the current through the equivalent resistance of the APD is almost independent of signal frequency. The mixing output is mainly attributed to the nonlinearity of the multiplication factor. We show also that there is an optimal local oscillator voltage at which the normalized gain is maximized for a given avalanche photodiode.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.672-680
• /
• 2018

A bidirectional exponential-gain switched-capacitor (SC) DC-DC converter is developed in this paper. When compared with existing exponential SC converters, the number of switches is significantly reduced and its structure is simplified. The voltage transfer features, voltage ripple across capacitors, efficiency and output impedance of the proposed converter are analyzed in detail. Optimization of the output impedance is also discussed and the best type of capacitance distribution is determined. A common function of the voltage gain to the output impedance is found among the proposed converter and other popular SC voltage multipliers. Experimental evaluation is carried out with a 6-24V bidirectional prototype converter.

• 오토저널
• /
• 제13권5호
• /
• pp.73-80
• /
• 1991

Air/fuel ratio control system for gasoline engines has been analyzed to determine the control gain of the system. In this analysis the engine is modelled to be a simple time delaying element and the ramp-and-jump method is used to control air/fuel ratio. The result shows that it is necessary to measure the air flow rate accurately to enhance the control performance. And also it is shown that the control gain must be determined in some bounded region to meet the fast dynamic response and high catalyst conversion efficiency together.

• 전자공학회논문지D
• /
• 제36D2호
• /
• pp.81-89
• /
• 1999

다양한 파장변화 기술중에서 레이져 다이오드의 발전상태에서 교차이득변도(Cross-Gain Modulation)을 이용한 파장변환은 고속의 신호를 매우 간단하고 효율적으로 처리할 수 있다. 본 논문에서는 SSGDBR (Superstructure Grating Distributed Bragg Reflector) 레이저 다이오드의 파장변환기로서 특성을 분석하고 광통신 네트웍 모델링을 위한 CAD 도구로서 개선된 시영역 대신호 동적모델(Time-Domain Large-Signal Dynamic Model)의 유용성을 제시하였다. 이 모델을 l용하여 이런 구조의 파장변환 소자는 10Gbps이상 고속데이터를 처리할 수 있고 광대역 파장변환이 가능하다는 것을 확인하였다. 입력 광신호의 세기와 주입되는 전류가 파장변환된 신호의 소광비 등에 미치는 영향 및 Eye Diagram 등을 살펴 보았으며, 기존에 발표된 실험결과들과 매우 유사한 경향을 보임을 관측하였다.

• 한국콘텐츠학회논문지
• /
• 제6권4호
• /
• pp.1-10
• /
• 2006

본 논문에서는 2.4GHz 대역에서의 응용을 위한 광대역 RF 모들을 설계하고 제작하였다. 무선 주파 신호를 중간 주파수로 변환하기 위한 RF 모듈은 3단 증폭기로 이루어진 저잡음 증폭기(LNA), 단종단 게이트 믹서, 정합 회로, 헤어핀 라인 대역 통과 필터, 쳬비셰프 저역 통과 필터로 구성하였다. 저잡음 증폭기는 높은 이득과 안정도를 갖도록 설계하였으며, 단종단 게이트 믹서는 높은 변환이득과 넓은 동작 영역을 갖도록 설계하였다. 광대역 RF모듈의 해석에서는 복합화된 하모닉 밸런스드 기법을 사용하여 RF모듈의 동작 특성을 해석하였다. 설계된 RF 모듈은 55.2dB의 변환이득, 1.54dB의 낮은 잡음 특성, $-120{\sim}-60dBm$의 넓은 RF전력 동작 영역, -60dBm의 낮은 고조파 성분 그리고 RF, IF, LO포트 간에 우수한 분리 특성을 갖는다.

• 농업과학연구
• /
• 제48권3호
• /
• pp.387-396
• /
• 2021

This study was conducted to provide basic data for efficient Hanwoo beef production by conducting a comparison of growth performance, blood metabolites, testosterone, and carcass characteristics of Hanwoo according to complete and hemi-castration. Twelve Hanwoo calves were allotted to two treatment groups as follows: CC = complete-castration and HC = hemi-castration method of removing only one testicle. At the end of the test, the body weight was 66 kg higher in HC than in CC, and the average daily gain increased by 12.6% (p < 0.05). The feed conversion ratio was significantly improved in HC compared to CC (p < 0.05). Serum cholesterol and triglyceride concentrations were significantly higher in CC than HC in both the growing and fattening periods (p < 0.05), and serum testosterone concentrations before castration were similar between HC and CC, but steadily increasing in HC after castration. Back fat thickness and marbling score were significantly higher in CC than HC in the entire period (p < 0.01). In the results of this study, hemi-castration can improve body weight gain and feed conversion ratio due to the influence of male hormones compared to complete castration, but it is considered that there will be difficulties in producing high-quality meat with a high marbling score.

• ETRI Journal
• /
• 제45권4호
• /
• pp.690-703
• /
• 2023

Multistage amplifiers have become appropriate choices for high-speed electronics and data conversion. Because of the large number of high-impedance nodes, frequency compensation has become the biggest challenge in the design of multistage amplifiers. The new compensation technique in this study uses two differential stages to organize feedforward and feedback paths. Five Miller loops and a 500-pF load capacitor are driven by just two tiny compensating capacitors, each with a capacitance of less than 10 pF. The symbolic transfer function is calculated to estimate the circuit dynamics and HSPICE and TSMC 0.18 ㎛. CMOS technology is used to simulate the proposed five-stage amplifier. A straightforward iterative approach is also used to optimize the circuit parameters given a known cost function. According to simulation and mathematical results, the proposed structure has a DC gain of 190 dB, a gain bandwidth product of 15 MHz, a phase margin of 89°, and a power dissipation of 590 ㎼.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.857-860
• /
• 2005

We reported 94 GHz, low conversion loss, and high isolation single balanced active-gate mixer based on 70 nm gate length InGaAs/InAlAs metamorphic high electron mobility transistors (MHEMTs). This mixer showed that the conversion loss and isolation characteristics were 2.5 ${\sim}$ 2.8 dB and under -30 dB, respectively, in the range of 93.65 ${\sim}$ 94.25 GHz. The low conversion loss of the mixer is mainly attributed to the high-performance of the MHEMTs exhibiting a maximum drain current density of 607 mA/mm, a extrinsic transconductance of 1015 mS/mm, a current gain cutoff frequency ($f_t$) of 330 GHz, and a maximum oscillation frequency ($f_{max}$) of 425 GHz. High isolation characteristics are due to hybrid ring coupler which adopted dielectric-supported air-gapped microstrip line (DAML) structure using surface micromachined technology. To our knowledge, these results are the best performance demonstrated from 94 GHz single balanced mixer utilizing GaAs-based HEMTs in terms of conversion loss as well as isolation characteristics.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.11-13
• /
• 2019

This paper proposes a novel high step-up non-isolated DC-DC converter, suitable for regulating dc bus in various inherent low voltage micro sources especially for photovoltaic (PV) and fuel cell sources. This novel high voltage Non-isolated Boost DC-DC converter topology is best replacement, where high voltage conversion ratio is required without the transformer and also need continuous input current. Since the proposed topology utilizes the stack-based structure, the voltage gain, and the efficiency are higher than other conventional non-isolated converters. Switches in this topology is easier to control since its control signal is grounding reference. Also, there is no need of extra gate driver and extra power supply for driver circuit, which reduces the cost and size of system. In order to show the feasibility and practicality of the proposed topology principle operation, steady state analysis and simulation result is presented and analyzed in detail. To verify the performance of proposed converter and theoretical analysis 360W laboratory prototype is implemented.