• Journal of Environmental Impact Assessment
• /
• v.15 no.6
• /
• pp.357-372
• /
• 2006

The excessive land activities in farming can cause soil erosion, inundation by a flood, and fallow. So far land evaluation has been analyzed using the land use limitation derived from the excessive land activities. This study was done for evaluating the agricultural fields by using 3 land use limitations, inundation potential, soil erodibility potential, and fallow potential. The study area is Ibang-myeon, Changnyeong-gun, Gyeongnam-province, Korea. A logistic regression model was applied to recognize the inundation potential by a flood in the Nakdong river basin. And potential soil erodibility index (PSEI) was derived from USLE model to analyze the soil erodibility potential. And a probability model from a logistic regression model was applied to detect the fallow potential. Therefore, we found 220.7ha for the 4th grade and 86.1ha for the 5th grade was analyzed as water damage potential. Large area near Nakdong river have problem to grow the rice due to the damage by water inundation. And 213.6ha for the 3rd grade and 103.3ha for 4th grade was detected as a result of the analysis of soil erosion potential. The soil erosion potential was high when within-field integrity of soil was not stable, or the kinetic energy was high or the slope length was long due to a steep slope of a specific land. And 869.1ha for 3rd grade, 174.9ha for 4th grade, and 110.6ha for 5th grade was detected to be distributed having the fallow potential. Especially, a village, having a steep mountain, had 249.5ha for the 3rd grade, which was 28.7% of total area showing the 3rd grade. Finally, Three villages, including An-ri, Geonam-ri, Songgok-ri, showed they had largest area of the suitable land in the study area. These villages had similar topographic condition where they were far from Nakdong river, and they had relatively higher elevation and flat lands.

• Korean Journal of Environmental Biology
• /
• v.20 no.3
• /
• pp.216-223
• /
• 2002

This study was carried out to classify forest vegetation community of Dodeokbong and Baekwunbong in Gyeryongsan. Employing the releve method of Dierssen, 89 plots were sampled. Forest community was classified into Quercus mongolica community, Quercus serrata community, Quercus variabitis community, Pinus densiflora community, Carpinus laxiflora community, and Pinus rigida-Pinus thunbergii community. Quereus mongolica community was found in high altitude and steep area, Quercus serrata community in relatively low altitude and steep slope area, and Quercus variabilis in southern arid and low area compared with Quercus mongolica community. Pinus densiflora community is present in relatively high altitude and narrow arid ridge area. And, Carpinus laxiflora community is mainly distributed in southern valley area. Pinus rigida-Pinus thunbergii community is planted community.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.37.2-37.2
• /
• 2013

We present the galaxy luminosity function (LF) of the Abell 119 cluster. Deep images in u, g, r bands were taken using MOSAIC 2 CCD on a Blanco 4-m telescope at CTIO. Based on scaling relations at faint magnitudes and spectroscopy at bright magnitudes, accurate membership of galaxies is determined. The LF is fitted by a single Schechter function and a two components (Gauss + Schechter) function. Blue galaxies are well fitted by a single Schechter function with steep slope ${\alpha}$ ~ -1.55). Red galaxies in the inner, high density region are fitted by single Schechter function with shallow slope (${\alpha}$ ~ -1.30), while red galaxies in the outer, low density region are well fitted by a two components function. The different slope of LFs between the inner and outer seems to stem from the luminosity segregation of A119 indicating larger number ratio of luminous to faint ratio towards the cluster center. The different shape of LFs seems to be resulted from the different composition of luminous and faint galaxies among main-cluster, sub-cluster, and infall region.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.5
• /
• pp.9-16
• /
• 2011

Curve Numbers (CN) for the combination of land use and hydrologic soil group were regionalized at Imha Watershed using Long-term Hydrologic Impact Assessment (L-THIA) coupled with SCE-UA. The L-THIA was calibrated during 1991-2000 and validated during 2001-2007 using monthly observed direct runoff data. The Nash-Sutcliffe (NS) coefficients for calibration and validation were 0.91 and 0.93, respectively, and showed high model efficiency. Based on the criteria of model calibration, both calibration and validation represented 'very good' fit with observe data. The spatial distribution of direct surface runoff by L-THIA represented runoff from Thiessen pologen at Subi and Sukbo rain gage station much higher than other area due to the combination of poor hydrologic condition (hydrologic soil C and D group) and locality heavy rainfall. As a results of hydrologic condition and treatment for land use type based on calibrated CNs, forest is recommended to be hydrologically modelled dived into deciduous, coniferous, and mixed forest due to the hydrological difference. The CNs for forest and upland showed the poor hydrologic condition. The steep slope of forest and alpine agricultural field make high runoff rate which is the poor hydrologic condition because CN method can not consider field slope. L-THIA linded with SCE-UA could generated a regionalized CNs for land use type with minimized time and effort, and maximized model's accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3287-3295
• /
• 2009

This present study implemented a rainfall simulation system, and performed simulation and numerical analysis according to rainfall and slope conditions using a model slope built with weathered granite soil. Extensive analysis were conducted on the characteristics of changes in volumetric water content and pore water pressure measured in the simulation, and compared them with the results of numerical analysis. It took longer for the volumetric water content to reach the limit when rainfall intensity was high and the slope was steep and shorter when rainfall intensity was low and the slope was gentle. When rainfall intensity was low and the duration of rainfall was short, negative pore water pressure was higher and the time for restoration was shorter. On the contrary, when rainfall intensity was high and the duration of rainfall was long, it took a longer time to restore negative pore water pressure. In the results of rainfall simulation and numerical analysis, the distribution of volumetric water content and pore water pressure was similar between the two. However, the volumetric water content was different by up to 5%, and pore water pressure by up to 3kPa.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.161-168
• /
• 2003

Most natural deposits of sandy soil possess some degree of cementation resulting from the deposition and precipitation of cementing agents. The presence of cementation can have a significant influence on the stiffness and volume change behavior, and the strength of soils. An important feature of deposits of cemented sandy soils is their ability to remain stable in surprisingly high and almost vertical man-made cuts as well as natural slopes. Numerous field observations and studies of failures in slopes of cemented soils have reported that application of conventional analysis techniques of slope stability is inadequate. That is not only due to the fact that the failure surface of the slope is not circular, but also the fact that the average shear stress along the failure surface is much smaller than the shear strength measured in laboratory shear experiments. This observation alerts us to the fact that a mechanism different from conventional Mohr-Coulomb shear failure takes place, which may be related to fracture processes, which in turn are governed by fracture mechanics concepts and theory. In this study, steep slopes in cemented sand were assessed using fracture mechanics concepts. The results showed that FEM coupled with fracture mechanics concepts provides an excellent alternative in the design and safety assessment of earth structures in cemented soils.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.904-909
• /
• 2004

The study area adjoins with Yangsan fault in Sangbuk-myeon, Samsam-ri, Kyongsang-namdo and consist of the natural steep slope. After drawing data layer which have altitude by using digital topography data, it is converted to lattice DEM of $10m{\times}10m$ size. From this, gradient map of unit lattice, slant direction map and shadow relif map are made. Using flow apportioning algorithm, upper slope contributing area and wetness index by established lattice can be calculated. Area that have high wetness index shows lineament structure of northwest-southeast direction, and this agrees with shear fracture system. The result of electricity specific resistance survey in the study area shows that area of high wetness index has low electricity specific resistance anomaly. That is, wetness index conforms with distribution of fractured zone that accompanied chemical weathering of rock. Therefore, wetness index can be used as the method of detecting fractured zones and judging the stability of the area.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2002

This paper describes characteristics of transient voltage waveforms caused by human electrostatic discharges(ESDs). For purpose of achieving the statistics on the meaningful amplitude and initial slope for transient ESD voltage waveforms, transient voltages due to human ESDs in various conditions were observed. A voltage measuring system with a wide bandwidth from DC to 400[MHz] was employed. ESD voltage waveforms are approximately the same as ESD current waveforms. Also the simulated results, which are calculated by the reposed equivalent circuit, are closely similar to the measured voltage waveforms. ESD voltage waveforms are strongly dependent on the approach speed and material of intruder, a fast approach causes ESD voltage waveform with a steep rise time than for a slow approach. The voltage waveforms from dialect finger ESDs have a relatively long rise time of 10∼30[ns], but their peaks are low. On the other side ESD voltage waveforms causer by screwdriver with insulating handle have a steep slope with a very short, less than 1[ns] rise time, but their initial spikes are extremely high The obtained results in this work would be applied to solve ESD problems for low voltage and small current electronic devices.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.15-34
• /
• 2021

Syntaxonomy and Synecology on Quercus variabilis forests in Daecheong-dam basin was carried out using the methods of Braun-Blanquet phytosociology. 6 syntaxa classified as species compositions described were Quercus variabilis community, Platycarya strobilacea-Quercus variabilis community(typicum subcommunity, dictamnus dasycarpus subcommunity), Quercetum variabili-serratae, Zelkova serrata-Quercus variabilis community and Dendranthema boreale-Quercus variabilis community. All syntaxa were shown habitat environmental conditions including steep inclination of more than 30°, high rock exposure rate of more than 50% and South-facing slope. These communities excepting Dendranthema boreale-Quercus variabilis community classified as natural vegetation were identified as low emergence rate of annual plants and species compositions composed native species, so it was confirmed that relatively natural succession were proceeding well. Quercetum variabili-serratae and Dendranthema boreale-Quercus variabilis community distributed forested hillslope of open water edge were representative Quercus variabilis syntaxa in Daecheong-dam basin.

• The Korean Journal of Ecology
• /
• v.25 no.5
• /
• pp.297-303
• /
• 2002

This study was carried out to analyze forest vegetation of Gabhasan and Woosanbong in Daejeon, Employing the releve method of TWINSPAN, 62 plots were sampled from June 2001 to September 2001. Field survey carried out to examine importance value, to do diameter of breast height(DBH) measurement, and to analyze the Ordination. The Forest vegetation was classified into four communities: Quercus mongolica community, Pinus densiflora community, Quercus variabilis community, Quercus acutissima community. The importance value of Pinus densiflora, Quercus variabilis, Quercus mongolica, Quercus serrata and Styrax japonica were high. According to DBH analysis, Pinus densiflora and Quercus variabilis dominate currently, however, importance value of Quercus mongolica, Quercus serrata, Prunus sargentii would increase in the future. The result of ordination analysis, showed that Quercus mongolica community was located in high altitude and steep area, Pinus densiflora community was located in comparatively high altitude and medium slope area, Quercus variabilis community was located in low altitude and gentle slope area and Quercus acutissima community was located in the lowest altitude and relatively gentle slope area.