• 제목/요약/키워드: high Tg

검색결과 898건 처리시간 0.029초

저지방 또는 고지방 섭취 시 대두올리고당의 섭취가 흰쥐의 지방대사에 미치는 영향 (Effects of Soyoligosaccharide on Lipid Metabolism in Rats Fed the High Fat or Low Fat Diet)

  • 방명희;김우경;김주현;이정숙;이다희;김숙희
    • Journal of Nutrition and Health
    • /
    • 제37권4호
    • /
    • pp.266-272
    • /
    • 2004
  • This study investigated the effects of soyoligosaccharide consumption on lipid profile of plasma, liver and feces and immune responses in Sprague-Dawley male rats. Sixty male Sprague-Dawley rats 4-wk-old were provided the soyo-ligosaccharide containing diets for 4 weeks (0, 100 g/kg diet); each of these diets was supplemented with either 70 or 200 g fat/kg diet, giving a total of 4 experimental groups. The effect of weight reduction was most significantly observed in the group fed low fat and soyoligosacchairde diet. The plasma total lipid and cholesterol contents were not changed by either fat proportion or soyoligosaccharide supplementation in the diets. Also the plasma triglyceride lowering effect by soyoligosaccharide was not observed in rats fed either low fat or high fat diet. However, the significant decrease in TG contents was found with rats fed high fat diets compared to the control/no soyoligosaccharide diet. Elevation of plasma LDL-cholesterol and reduction of HDL-cholesterol by feeding high fat diet was not altered by supplementing soyoligosaccharide. This was also applied to the liver lipid profiles. The significant increases in liver total lipid, trigly-cerides and cholesterol by high fat diet was not abolished by feeding soyoligosaccharide. However, the desirable effects of feeding soyoligosaccharide were found with total lipid and cholesterol excretion through feces in rats fed high fat diets. Immune organ weights and spleen cell proliferations did not affected by experimental diets. These results de-monstrated that soyoligosaccharide intakes increased the lipid output via feces, especially in rats fed the high fat diet, but more researches are needed on immune responses.

고지방식이로 유도된 비만 렛트에서 외이침 자극과 유산소 운동의 효과 (Effect of Auricular Acupuncture and Aerobics Exercise in High Fat Diet-induced Obesity Rats)

  • 이대식;김사열;장미경;신민철;김은정;심기철;남기원;오명화;정현우;김계엽
    • 동의생리병리학회지
    • /
    • 제20권5호
    • /
    • pp.1174-1179
    • /
    • 2006
  • In order to study auricular acupuncture and treadmill exercise involved in high fat diet-induced obesity rats. Thirty Sprague-Dawley rats which were divided into five group. Group I : Normal diet-induced group, Group II : high fat diet-induced group, Group III: high fat diet-induced group and auricular acupuncture, Group IV : high fat diet-induced group and treadmill exercise, Group V : high fat diet-induced group and auricular acupuncture and treadmill exercise. In each group, body weight, serum lipid, histologic obserations, and fat tissue were observed and analyzed. The following results were obtained. Body weights were significantly increase in group II than group I. The level of total cholesterol, LDL-C and TG were significantly lower in experimental groups than group I. Only auricular acupuncture was tended to body weight change but not significantly different between experimental group. The above result suggest that auricular acupuncture and treadmill exercise effectively repressed in obesity. It would be considered that auricular acupuncture and treadmill exercise have an effects on relieving obesity.

Color Pure and Stable Blue Light Emitting Material Containing Anthracene and Fluorene for OLED

  • Park, Hyun-Tae;Oh, Dae-Hwan;Park, Jong-Won;Kim, Jin-Hak;Shin, Sung-Chul;Kim, Yun-Hi;Kwon, Soon-Ki
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권7호
    • /
    • pp.1951-1955
    • /
    • 2010
  • A new blue light emitting anthracene derivative, 9,10-bis-(9',9'-diethyl-7'-t-butyl-fluoren-2'-yl)anthracene (BETF), has been designed and synthesized by a palladium catalyzed Suzuki cross-coupling. A theoretical calculation of the three-dimensional structure of BETF supports that it has a non coplanar structure and inhibited intermolecular interactions resulting in high luminescent efficiency and high color purity. BETF has good thermal stability with glass-transition temperature (Tg) of $131^{\circ}C$. The PL maximum of BETF in solution and film were 438 nm and 440 nm, respectively, showing pure blue emission. A multilayer device using BETF as emitting material exhibits maximum luminescence efficiency of 2.2 cd/A and a pure blue emission (Commission Internationale de L'Eclairage (CIE) coordinates of x = 0.15, y = 0.10).

Sol-Gel 방법에 의한 BST 박막의 표면 및 전기적 특성 (The Surface and Electrical Properties of BST Thin Films Prepared by Sol-Gel Method)

  • 홍경진;조재철
    • 한국전기전자재료학회논문지
    • /
    • 제15권6호
    • /
    • pp.504-510
    • /
    • 2002
  • Recently, thin film capacitors of high dielectric constant and low leakage current are applied to integrated devices. In this study, (Ba, Sr)$TiO_3$ (BST) thin films for low cost were prepared by Sol-Gel method. BST solution was spin-coated on Pt/$SiO_2$/Si substrate at 4,000 rpm for 10 seconds. Coating process was repeated 3 times and then sintered at $700^{\circ}C$ for 30 minutes. Structural and electrical characteristics of each specimen were analyzed by TG-DTA, SEM, fractal phenomenon, voltage-current and dielectric factor. Thickness of BST ceramics thin films are about 2,600~2,800 ${\AA}$ at depositing 3 times. Dielectric constant of thin films was decreased in 1 kHz~1 MHz. Dielectric constant and loss to frequency were 250 and 0.02 in $(Ba_{0.7}Sr_{0.3})TiO_3$ (BST3). Leakage current of BST3 was $10^{-9}\sim10^{-11}$/ A under 3 V.

Apo E Null mice에서 인삼 Ginsenosides (PD:PT = 1) 추출물의 지질개선 및 항산화 효과 (Hypolipidemic and Antioxidant Effects to Ginseng Extract (PD:PT = 1) in Apo E Null Mice)

  • 장수정;김성수;이명숙
    • Journal of Nutrition and Health
    • /
    • 제41권7호
    • /
    • pp.594-601
    • /
    • 2008
  • Panax ginseng C.A. Meyer (Panax ginseng) has been used for several thousand years to prolong longevity in Asian countries. Ginsenosides are the most active components isolated from ginseng and belong to damarane saponin which are separated into protopanaxadiol and protopanaxtriol. To evaluate the complex effect of ginsenoside in apo E null mice, ginseng extract were intraperioneally (i.p.) injected and provided high-cholesterol diet for 12 weeks. Ginseng extract came from were i.p. injected with dose of 100 mg/kg/day for 4 weeks in the last experimental duration. Ginseng extract used experiment was abundant Rb1, Rc, Re, and Rg1 and PD:PT ratio was 1.2. The high-cholesterol diet induced liver damage was significantly reduced by ginseng extract. Results from plasma lipid profiles and atherogenic index were improved by ginseng extracts. The GE group significantly decreased plasma TG and TC by 73% and 61% compared to apo E (-/-) group. Also ginseng extract tend to decrease lipid profiles and lipidperoxidation contents in liver and heart. Ginseng extract with an abundant amount of Rg1 significantly suppressed the apoptosis induction of cardiac tissue. In conclusion, ginseng extract (PD:PT = 1) was improved lipid profiles and anti-oxidant effects.

Production of Exo-Polymers by Submerged Mycelial Culture of Cordyceps militaris and Its Hypolipidemic Effect

  • Yang, Byung-Keun;Ha, Ji-Young;Jeong, Sang-Chul;Das, Surajit;Yun, Jong-Won;Lee, Young-Se;Choi, Jang-Won;Song, Chi-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • 제10권6호
    • /
    • pp.784-788
    • /
    • 2000
  • Hypolipidemic effect of exo-polymers(EPs) form submerged mycelial culture of Cordyceps militaris was investigated in male Sprague-Dawley rats. For a dose-dependent study, EPs were administered at the level of 50-100 mg/kg body weight (BW) and the data was compared with the saline administered control group. A significant reduction of both the plasma total cholesterol (TC) and triglyceride (TG) was registered under the influence of EPs. It reduced the lowe density lipoprotein (LDL) cholesterol level as much as 40.5%. Levels of high density lipoprotein (HDL) choloesterol did not vary significantly within the different experimental groups, but the HDL: TC ratio showed consistently a high value with the increasing dose. The effects of cultural conditions (pH and temperature) in mycelial growth and EPs production were studied. Both the biomass and EPs were produced in a wide range of pH and temperature.

  • PDF

고지혈증 동물모델 설정을 위한 식이처방의 실험적 연구 (Studies on Diet Regimens for the Developement of Hyperlipidemic Animal Model)

  • 노환성;김운자;박건구;조영환;박형섭
    • Journal of Pharmaceutical Investigation
    • /
    • 제24권4호
    • /
    • pp.297-300
    • /
    • 1994
  • Development of hyperlipidemic animal model is prerequisite for the screening of drugs lowering the blood lipoprotein level. In this study, two kinds of diet regimens were tried for the hyperlipidemic effect. The model will be used for the screening of current prescriptions to a variety of diseases related to hyperlipidemia by practioner of traditional herbal medicine. Fifteen male Wister rats of 200g were divided into three groups, and given normal, or either one of the two high cholesterol diets for up to 2 weeks. Regimen HC-1 and regimen HC-2 contained I% and 2% cholesterol in diet, respectively. Total cholesterol (TC), triglyceride (TG), high density lipoprotein cholesterol (HDL) and lower density lipoprotein cholesterol (LDL) levels in the serum were measured before the start of the diet, at 1 week after the start, and at 2 week point. Both regimens resulted in hyperlipidemia with the typical characteristics of increase in TC and LDL, and reduction in HDL, and showed no observable side effects such as diarrhea. In conclusion, both of HC-1 and HC-2 regimens appeared appropriate as diet regimens for the hyperlipidemic rat model.

  • PDF

카프로락톤기 함유 80% 고형분인 아크릴수지와 HMDI-Trimer에 의한 하이솔리드 도료의 도막물성 (Physical Properties of High-Solid Coatings with 80% Solid Contents Acrylic Resins Containing Caprolactone Group and HMDI-Trimer)

  • 박홍수;정충호;조혜진;심일우;김승진;김성길
    • 한국응용과학기술학회지
    • /
    • 제23권2호
    • /
    • pp.110-114
    • /
    • 2006
  • The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper, and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion, and heat resistance of the films proved to be good, and the pencil hardness, drying time, and pot-life proved to be slightly poor. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value.

Synthesis and Characterization of Carbon nanofibers on Co and Cu Catalysts by Chemical Vapor Deposition

  • Park, Eun-Sil;Kim, Jong-Won;Lee, Chang-Seop
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권6호
    • /
    • pp.1687-1691
    • /
    • 2014
  • This study reports on the synthesis of carbon nanofibers via chemical vapor deposition using Co and Cu as catalysts. In order to investigate the suitability of their catalytic activity for the growth of nanofibers, we prepared catalysts for the synthesis of carbon nanofibers with Cobalt nitrate and Copper nitrate, and found the optimum concentration of each respective catalyst. Then we made them react with Aluminum nitrate and Ammonium Molybdate to form precipitates. The precipitates were dried at a temperature of $110^{\circ}C$ in order to be prepared into catalyst powder. The catalyst was sparsely and thinly spread on a quartz tube boat to grow carbon nanofibers via thermal chemical vapor deposition. The characteristics of the synthesized carbon nanofibers were analyzed through SEM, EDS, XRD, Raman, XPS, and TG/DTA, and the specific surface area was measured via BET. Consequently, the characteristics of the synthesized carbon nanofibers were greatly influenced by the concentration ratio of metal catalysts. In particular, uniform carbon nanofibers of 27 nm in diameter grew when the concentration ratio of Co and Cu was 6:4 at $700^{\circ}C$ of calcination temperature; carbon nanofibers synthesized under such conditions showed the best crystallizability, compared to carbon nanofibers synthesized with metal catalysts under different concentration ratios, and revealed 1.26 high amorphicity as well as $292m^2g^{-1}$ high specific surface area.

Polymerization of fibrous and high molecular weight polyethylene using MgCl2/SBA-16/TiCl4

  • Panpoom, Salinla;Klinsrisuk, Sujitra;Martwiset, Surangkhana;Poonsawat, Choosak
    • 한국입자에어로졸학회지
    • /
    • 제11권4호
    • /
    • pp.107-113
    • /
    • 2015
  • SBA-16 (Santa Barbara Amorphous) was synthesized over supported $TiCl_4/MgCl_2$. Due to its high surface area and excellent morphological performance, it was expected to form the bi-supported catalytic system and be used for ethylene polymerization. Polymerization of ethylene was carried out at atmospheric pressure using hexane as solvent and triethylaluminium as cocatalyst. ICP, FTIR, DSC, TG-DTA were used to characterize polyethylene and catalyst product. Optimum conditions for ethylene polymerization were found to be 100 mL hexane, Al/Ti molar ratio of 160 and 1 h polymerization at $60^{\circ}C$. The activity of 396.76 kg PE/mol Ti.h.atm was achieved. Melting point of the obtained polymer was in the range of $132-135^{\circ}C$ and the highest degree of crystallization was 46%.