• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1005-1011
• /
• 1994

The three different composition of BaTi4O9, Ba2Ti9O20 and BaTi5O11 were prepared by coprecipitation process, and then the dielectric properties of these compounds were measured at low microwave frequencies. The powder showing high level of purity was synthesised by the coprecipition reaction of BaCl2 and TiCl4 where (NH4)2CO3 and NH4OH were used as a deflocculent. Followings are the result of this study: 1. The sintering temperature increased with increasing TiO2 content. 2. BaTi4O9 powder were synthesized as a single phase by this processing technique, but the resultant Ba2Ti9O20 and BaTi5O11 phase existed with Ba2Ti9O20 and BaTi5O11 phases. 3. Single phase BaTi4O9 showed high dielectric constant value of 35, high Q value of 8100.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1932-1938
• /
• 2003

We have applied spectroscopic ellipsometry to investigate $high-{\kappa}$ dielectric thin films and correlate their optical properties with fabrication processes, in particular, with high temperature annealing. The use of high-k dielectrics such as $HfO_{2}$, $Ta_{2}O_{5}$, $TiO_{2}$, and $ZrO_{2}$ as the replacement for $SiO_{2}$ as the gate dielectric in CMOS devices has received much attention recently due to its high dielectric constant. From the characteristics found in the pseudo-dielectric functions or the Tauc-Lorentz dispersions, the optical properties such as optical band gap, polycrystallization, and optical density will be discussed.

• 대한화학회지
• /
• 제24권2호
• /
• pp.139-145
• /
• 1980

마크로사이클리간드인 1,4,8,11-테트라아자사이클로테트라데칸 (cyclam)과 비환형 리간드인 1,5,8,12-테트라아자도데칸 (3,2,3-tet)의 높은 스핀철(Ⅱ) 착화합물이 합성되었다. 낮은 스핀인 $[Fe(cyclam)(CH_3CN)_2](ClO_4)_2$는 메탄올속에서 염소이온과 반응하여 높은 스핀인 $[Fe(cyclam)Cl]ClO_4$를 생성한다. $[Fe(cyclam)(CH_3CN)_2](ClO_4)_2$는 낮은 스핀이지만 $[Fe(3,2,3-tet)(CH_3CN)_2](ClO_4)_2$는 높은 스핀을 가지며 이 차이는 비환형 리간드가 환형 리간드보다 압축효과가 작은 것으로 설명된다. $[Fe(cyclam)Cl]ClO_4$의 합성은 마크로사이클리간드가 불포화되어 있거나 치환체가 있어야 높은 스핀 다섯배위철(II) 착화합물의 합성이 가능하다는 지금까지의 전해에 반대되는 증거가 된다. $[Fe(cyclam)Cl]ClO_4$와 $[Fe(3,2,3-tet)(CH_3CN)_2](ClO_4)_2$는 일산화탄소와 반응해서 각기 낮은 스핀 여섯배위인 $[Fe(cyclam)Cl(CO)]ClO_4$ 와 $[Fe(3.2,3-tet)(CH_3CN)(CO)](ClO_4)_2$를 만든다.

• 열처리공학회지
• /
• 제20권5호
• /
• pp.231-236
• /
• 2007

High velocity oxy-fuel (HVOF) spraying was used to coat Ti(Al,O)/$Al_2O_3$ powder onto the SS41 steel plate. Macrostructure of the coated specimen has been investigated by scanning electron micrograph (SEM). High temperature oxidation behavior of the coated specimen and SS41 steel have been studied. From the results of SEM observation, Ti(Al,O)/$Al_2O_3$ powder was coated well onto the substrate SS41 steel. Porosity onto the coated layer was only 0.38%. The oxidation results showed that Ti(Al,O)/$Al_2O_3$ powder coated SS41 steel have improved little oxidation resistance at $900^{\circ}C$ in air, but improved remarkably oxidation resistance at $800^{\circ}C $ in air compare to the substrate SS41 steel.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.310-316
• /
• 2012

Nanocrystalline $BaTiO_3$ powder could be synthesized by solid-state reaction using the mixture which was prepared by a high energy milling process in a bead mill for $BaCO_3$ and nanocrystalline $TiO_2$ powders mixture. Effect of the milling time on the powder characteristic of the synthesized $BaTiO_3$ powder was investigated. Nanocrystalline $BaTiO_3$ with a particle size of 50 nm was obtained at $800^{\circ}C$. High tetragonal $BaTiO_3$ powder with a tetragonality(=c/a) of 1.009 and a specific surface area of $7.6m^2/g$ was acquired after heat-treatment at $950^{\circ}C$ for 2 h. High energy ball milling was effective in decreasing the reaction temperature and increasing the tetragonality.

• 한국진공학회지
• /
• 제17권2호
• /
• pp.138-147
• /
• 2008

RF 스퍼터링 시스템을 이용하여 $SiO_2/TiO_2/ZrO_2$ 광대역 반사방지막을 단계별로 제작하였고, 분광타원계와 $UV-V_{is}$ 분광광도계를 이용하여 박막의 두께, 굴절률 및 투과율 스펙트럼을 300$\sim$900nm의 파장 영역에 걸쳐 측정 및 분석하였다. 측정 및 분석된 박막의 두께, 굴절률 및 투과율 스펙트럼을 설계값과 비교 평가한 결과 각층의 두께, 굴절률의 차이에 따른 투과율의 변화를 분석할 수 있었고, 박막의 두께보다는 굴절률과 굴절률의 분산형태가 투과율의 변화에 더 크게 기여함을 알 수 있었다.

• 공업화학
• /
• 제21권1호
• /
• pp.58-62
• /
• 2010

$TiOSO_4$와 다층벽탄소나노튜브(MWCNT)를 사용하여 가수분해법으로 CNT-$TiO_{2}$ 나노복합체를 제조하였다. 제조된 $TiO_{2}$-CNT 복합체의 CNT는 아나타제 $TiO_{2}$에 균일하게 분산되어 있으며 MWCNT의 첨가량이 증가함에 따라 결정성 탄소의 비율과 O/Ti 비율이 증가함을 확인할 수 있다. CNT-$TiO_{2}$복합체의 광활성 및 오염물 흡착능력을 UV 조사 시간에 따른 메틸렌블루의 분해정도로 확인하였다. MWCNT의 비율이 높아질수록 높은 흡착능과 광분해능을 나타내었다. 이는 MWCNT의 높은 비표면적, 산소포함 관능기, 낮은 밴드갭 에너지, 높은 전기전도성, 높은 부피 대 표면적 비율, 균일한 구조 및 특성으로 인하여 CNT-$TiO_{2}$ 복합체의 광활성에 도움을 주는 것으로 보인다.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.51-59
• /
• 1986

It was the first time the MgO-C brick was developed for the lining materials in the hot spots in electric are furnace in 1972. MgO-C brick is high registant to thermal and structural spalling. Futhermore for the reason that carbon is hard to react with slag and MgO is high fireproof MgO-C brick shows a high corrosion registance to slag attack compared with conventional basic refractories. Owing to their excellent properties the use of MgO-C refractories are being developed widely in the field of shaped refractories and even in that of monolithic refractories. In this paper the oxidation of carbon the infiltration of slag into the brick texture and effects of additions were investigated. The results obtained were as follows : 1) The use of fused MgO-clinker and high purity carbon as raw materials increased the corosion registance and hot modulus of rupture of MgO-C brick. 2) As the oxidation reaction of the carbon proceeded the slag infiltrated into the brick texture. And then the slag components reacted with the MgO grains and formed low melting point compounds particulary CaO.MgO.$SiO_2$ and 3CaO.MgO.$2SiO_2$ that resulted in the wear of the brick. 3) It is recongnized the Al, Si, $B_3C$ effects on the oxidation registant properties of MgO-C brick by contribu-ting to the decrease of permeability according to the formation of $Al_4C_3$, SiC, $B_2O_3$ and the decrease of open pores relating to the formation of MgO.Al2O3, $SiO_2$, 3MgO.$B_2O_3$ at the decarbonized layer.

• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.235-238
• /
• 1997

Basic properties of new cement pastes based on the system $CaO-Al_2O_3-P_O_5-H_2O$were studied Phosphoric acid solutions and calcium dialuminate clinkers synthesized by the hydration-burning method were used for liquid and powder components of the paste, respectively Variation in the compositions of the paste was achieved by changing the liquid/powder ratio and the concentration of phosphoric acid solution. The hardening rate of the paste was so largely affected by the amount of phosphoric acid that hardening was inhibited with the low-concentrated solution but was explosively accelerated with the high-concentrated solution. The phosphoric acid solutions of concentration of 45~50% and the liquid/powder ratio of 0.5~1.5 were favoured for the high early-strength cement paste with the reasonable hardening rate and high strength. The binding phase of hardened paste was the dense amorphous gel of the system $CaO-Al_2O_3-P_O_5-H_2O$. in which the unreacted calcium dialuminate grains were embeded.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.11-18
• /
• 2014

Two-step water splitting thermochemical cycle with $CeO_2$ foam device was investigated by using a solar simulator composed of 2.5 kW Xe-Arc lamp and mirror reflector. The hydrogen production of $CeO_2$ foam device depending on reaction temperature of Thermal-Reduction step and Water-Decomposition step was analyzed, and the hydrogen production of $CeO_2$ and $NiFe_2O_4/ZrO_2$ foam devices was compared. As a result, the amount of reduced $CeO_2$ considerably varies according to the reaction temperature of Thermal-Reduction step. and hydrogen production was not much when the amount of reduced $CeO_2$ decreased even if the reaction temperature of Water-Decomposition step was high. Therefore, it is very important to keep the reaction temperature of Thermal-Reduction step high in two-step thermochemical cycle with $CeO_2$.