• Journal of Applied Biological Chemistry
• /
• 제44권1호
• /
• pp.16-19
• /
• 2001

Soybean plants(Glycine max [L.] merr.) inoculated with Bradyrhizobium japonicum MN110 were grown in growth chambers under 400 or $800{\mu}l{\cdot}l^{-1}$ atmospheric $CO_2$ and harvested at 25, 28, 32, and 35 DAT to examine the effect of $CO_2$ enrichment on phosphorus accumulation, uptake, and utilization efficiency during vegetative growth. Phosphorus concentration in leaf was lower in high $CO_2$ plant by 47% at 25 DAT and 34% at 35 DAT than those in the control plant but phosphorus concentrations in stem, root and nodule were not affected by $CO_2$ enrichment. Total phosphorus accumulation increased 3.9-fold in high $CO_2$ plant and 3.2-fold in the control plant between 25 and 35 DAT. Elevated $CO_2$ caused a decrease in the whole plant phosphorus concentration by 35%, which was due almost entirely to a decrease in the phosphorus concentration of leaves. $CO_2$ enrichment increased phosphorus utilization efficiency in the whole plant by 70% during the experimental period. Plants exposed to high $CO_2$ had larger root systems than under ambient $CO_2$, but high $CO_2$ plants had lower P-uptake efficiency. Averaged over four harvests, plants at high $CO_2$ had 38% larger root mass that was more than offset the 20% lower efficiency of P-uptake and accounted for increased phosphorus accumulation by high $CO_2$ plant. These results suggest that the reduced phosphorus concentration in soybean plant under $CO_2$ enrichment may be an acclimation response to high $CO_2$ concentration or enhanced starch accumulation, resulting in the plants to have a lower phosphorus requirement on a unit dry weight basis or a high phosphorus utilization efficiency under these conditions.

• 자원ㆍ환경경제연구
• /
• 제20권1호
• /
• pp.1-31
• /
• 2011

본 논문에서는 우리나라의 2005년 환경산업연관표(76개의 내생부문, 21개의 에너지원)를 작성하고, 중간수요부문과 최종수요부문을 대상으로 중간투입액기준의 $CO_2$ 원단위, 열량기준의 $CO_2$ 원단위, 유발 $CO_2$ 발생량을 추정하고, 경제주체간 및 산업간의 상품생산과 흐름에 수반되는 에너지소비와 $CO_2$의 흐름을 분석하였다. $CO_2$ 원단위의 비교에 따르면 최종수요부문이 더 높은 열량을 갖는 에너지원을 사용하며, 중간수요부문이 환경친화 정도가 상대적으로 낮은 에너지원을 사용하여 동일 열량에 대해서 $CO_2$를 더 배출시키고 있다. 유발 $CO_2$ 발생량이 높은 산업은 화력발전($32.587CO_2-g$/원), 시멘트($10.370CO_2-g$/원), 도로운송($7.255CO_2-g$/원), 코크스 및 기타석탄제품($5.791CO_2-g$/원), 증기 온수공급업 수도($4.575CO_2-g$/원)이다. 높은 $CO_2$ 원단위의 산업들의 $CO_2$ 원단위를 저감시키는 것은 해당산업의 환경친화성을 높이는 것과 함께, 경제 전체의 환경친화성을 높인다. 더하여 선철 및 조강처럼 낮은 $CO_2$ 원단위를 갖지만 높은 영향력계수와 감응도계수를 갖는 산업의 $CO_2$ 원단위도 낮추어야 한다. 이 산업들은 다른 산업에게, 그리고 다른 산업으로부터 상대적으로 큰 영향을 받기 때문에 $CO_2$ 원단위가 낮더라도 환경친화성을 갖추어야 유발 $CO_2$ 발생량을 낮출 수 있다.

• 생물환경조절학회지
• /
• 제15권4호
• /
• pp.364-368
• /
• 2006

This experiment was carried out to figure out the $CO_2$ biomass and the growth response of Chinese cabbage and radish grown under the condition of high temperature and high $CO_2$ concentration to provide the information for the coming climatic change. Chinese cabbage and radish were cultivated in spring and autumn seasons under 4 treatments, 'ambient temp.+ambient $CO_2$ conc.', 'ambient temp.+elevated $CO_2$ conc.', 'elevated temp.+ ambient $CO_2$ conc.', and 'elevated temp. +elevated $CO_2$ conc.'. The 'elevated temp,' plot was maintained at 5 higher than 'ambient temp. (outside temperature)'and the 'elevated $CO_2$ cone.' plot was done in 650 ppm $CO_2$. The growth of spring-sown Chinese cabbage was worse than autumn-sown one, and was affected more by high temperature than high $CO_2$. concentration. The $CO_2$ biomass of Chinese cabbage was lower as 25.1-39.1 g/plant in spring-sown one than 54.8-63.4 g/plant of autumn-sown one. Daily $CO_2$2 fixation ability was not significantly different between spring- and autumn-sown Chinese cabbage as 1.9-2.9, 2.7-3.1 kg/10a/day, respectively. The $CO_2$ biomass of radish were 87.4-104.6 /plant in spring-sown one and 51.3$\sim$76.4 g/plant in autumn-sown one. Daily $CO_2$ fixation ability of radish were 6.2-10.1 kg/10a/day in spring-sown one and 4.6-6.9 kg/10a/day in autumn-sown one.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.168-168
• /
• 2022

According to the 5th Climate Change Report, global average temperature in 2081~2100 will increase 1.8℃ based on RCP 4.5 and 3.7℃ based on RCP 8.5 from the current climate value (IPCC Working Group I AR5). As temperature is expected to increase due to global warming and the intensity and frequency of rainfall are expected to increase, damage to crops is expected, and countermeasures must be taken. This study intends to evaluate rice growth in terms of nitrogen utilization efficiency according to future climate change conditions. In this experiment, Oryza sativa cv. Shindongjin were planted at the SPAR facility of the NICS in Wanju-gun, Jeollabuk-do on June 10, and were planted and grown according to the standard cultivation method. Cultivation conditions are high temperature, high CO₂ (current temperature+4.7℃·CO₂ 800ppm), high temperature (current temperature+4.7℃·CO₂ 400ppm), current climate (current tempreture·CO₂ 400 ppm). Nitrogen was varied as 0, 9, 18 kg/10a. The N content and C/N ratio of all rice leaves, stems, and seeds increased at high temperature, and the N content and C/N ratio decreased under high temperature and high CO₂ conditions com pared to high temperature. Compared to the current climate, NUE increases by about 8% under high temperature and high CO₂ conditions and by about 2% under high temperature conditions. This seems to be because the increase in temperature and CO₂ induced the increase in biomass. ANUE related to yield decreased by about 70% compared to the current climate under high temperature conditions, and decreased by about 45% at high temperature and high CO₂, showing a tendency to decrease compared to high temperature. This appears to be due to reduced fertility and poor ripening due to high temperature stress. However, as the nitrogen increased, the number of ears and the number of grains increased, slightly offsetting the production reduction factor.

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.17-23
• /
• 2015

Laser-gas metal arc hybrid welding has been considered as an alternative process of gas metal arc welding for offshore pipe laying. Fiber delivered high power lasers which enable deep penetration welding were recently developed but high power welding characteristics were not fully understood yet. In this study, the influence of shielding gas composition on welding phenomena in high power laser welding was investigated. Bead shapes, melt ejection and dropping were observed after autogenous laser welding with 100% Ar, Ar-20% $CO_2$, Ar-50% $CO_2$, and 100% $CO_2$ shielding gas. Process parameter window was widest with Ar-50% $CO_2$ shielding gas and the penetration was deepest with 100% $CO_2$ shielding gas. The melt dropping was not observed when Ar-50% $CO_2$ or 100% $CO_2$ shielding gas was supplied.

• Ocean and Polar Research
• /
• 제38권4호
• /
• pp.303-314
• /
• 2016

We tested the combined effects of increased partial pressure of $CO_2$ ($pCO_2$) and temperature on the reproduction and survival of the copepod Calanus sinicus from Asan Bay, the Yellow Sea under laboratory conditions to understand the impact of acidification on copepods. Egg production rate, survival rate, and fecal pellet production of C. sinicus were not affected by 1305 ppm $pCO_2$ or with combined treatments of temperature and $pCO_2$, including $8^{\circ}C$ and 289 ppm $pCO_2$ (ambient), $8^{\circ}C$ and 753 ppm $pCO_2$ (high $pCO_2$), $12^{\circ}C$ and 289 ppm $pCO_2$ (high temperature), and $12^{\circ}C$ and 753 ppm $pCO_2$ (greenhouse), for 5 or 10 d of exposure. However, egg hatching success of C. sinicus decreased significantly in the greenhouse treatment compared with the ambient or the high $pCO_2$ treatments. These results suggest that a combined treatment ($pCO_2$ and temperature) affected egg viability more than a single treatment($pCO_2$).

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.480-485
• /
• 2005

In the respect of the environmental protection viewpoint, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be newly developed, because properties of $CO_2$ are different compared with those of classical refrigerants. Especially, high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. In this study, intelligent control algorithms for a $CO_2$ system were developed ‘ These are a high-side pressure control algorithm and an indoor air temperature control algorithm. These algorithms were analysised by using dynamic models of a $CO_2$ system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.681-686
• /
• 2006

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2's$ unique propel-ties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. In this study, dynamic models of a $CO_2$ air-conditioning system were developed by using experimental data. Control algorithms for a high-side pressure control and an indoor air temperature control were developed and analysed by using the dynamic simulation program of a $CO_2$ system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.29-33
• /
• 2007

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2$'s unique properties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. In this study, the high-side pressure setpoint algorithm was developed by using a neural network and a Lagrange interpolation method. These methods were compared. Simulation results showed that a Lagrange interpolation method was more effective than a neural network in the respect of its easiness of programming and shorter execution time.

• 청정기술
• /
• 제28권1호
• /
• pp.1-8
• /
• 2022

미활용 저급자원인 석유코크스를 대상으로 고순도의 수소 생산을 위한 수성가스전이반응에 적용가능성을 확인하기 위하여 Cu/ZnO/MgO/Al₂O₃ (CZMA) 촉매를 공침법을 사용하여 제조하였다. 제조된 촉매는 BET, H₂-TPR을 사용하여 분석되었다. 촉매의 반응성 테스트는 고농도의 CO를 포함하는 합성가스로부터 단일 Low Temperature Shift 반응을 거치는 경우와 High Temperature Shift 반응을 거친 후 스팀의 응축 없이 즉시 LTS 반응을 거치는 두 가지의 경우를 비교 및 분석하였다. 두 조건에서 steam/CO 비, 유량 및 유속, 온도에 따른 반응특성을 확인하였다. 전환된 저농도의 CO와 스팀이 응축 없이 LTS로 즉시 주입되는 경우 많은 양의 스팀이 존재함에도 불구하고 대부분의 조건에서 다소 낮은 CO 전환율을 나타냈다. 또한 steam/CO비, 온도 및 유속에 대한 영향이 크게 나타나 최적의 조업조건을 결정하기에 추가적인 분석이 요구되었다. 반면, 고농도의 CO 기체를 포함하는 조건에서는 탄소침적 또는 촉매의 활성 저하가 나타나지 않았으며 대부분의 조건에서 높은 CO 전환율을 나타내었다. 결론적으로 Cu/ZnO/MgO/Al₂O₃ 촉매를 적용하여 고농도의 CO를 포함하는 합성가스 조성에서 적절한 조업조건을 적용시키면 단일 LTS 반응을 적용해도 고농도의 CO를 CO₂로 충분히 전환 가능함을 확인하였다.