• Membrane Journal
• /
• v.33 no.6
• /
• pp.427-438
• /
• 2023

In this study, in order to improve the performance of the reverse osmosis membrane with high water flux and high salt rejection, a study was conducted on the evaluation of characteristics according to the curing temperature and time during various additives and interfacial polymerization. The morphology of the membrane with no additives and the membrane with additives both showed a "rigid-and-valley" structure, confirming that the polyamide layer was successfully polymerized on the surface of the porous support layer. In addition, the additive of 2-Ethyl-1,3-hexanediol (EHD) had improved hydrophilicity and water flux, which was confirmed by measuring the contact angle. Finally, a highly permeable TFC membrane with NaCl and MgSO₄ salt rejection of 97.78% and 98.7% and a high water flux of 3.31 L/(m²⋅h⋅bar) was prepared.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.123-130
• /
• 2008

A 3D structure production method for microstereolithography is a useful way that produces complex structures with flexible processes and low cost. Several UV curable resins were blended and the optimal resin for micro-lens fabricate was selected through viscosity, workability and transmission tests. It consists of 1, 6 - Hexanediol diacrylate with 15 Apha and Isobornyl acrylate for reducing some shrinkage. When fabricating a micro-lens array on large surface, some distortion of shape occurred because of the surface tension between cured part. To overcome this problem, the optimal processing conditions were derived from considering amount of the resin and surface tension. Large surface Micro-lens array, which are a type of elliptical convex and consist of 18,000 micro-lens in the range of 2cm*2cm were fabricated. The focal length to the X-axis and Y-axis were calculated. To verify the performance, measure an energy distribution of transmitted light from the Large surface Micro-lens array.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.477-484
• /
• 2008

It is inevitable to use chemical germicidal agents like paraben, imidazolidinyl urea and phenoxyethanol to preserve the emulsions which is usually used in cosmetics. Although these chemical preservatives are good enough to reduce the microbiological contamination, they are irritative, allergenic to the skin. Several kinds of polyols are used in cosmetics as moisturizer and solvent. In this study, we evaluate the effects of polyols on anti-microbial activities, safety and resistant index. MIC(minimal inhibitory concentration) of polyols determined against 6 germs including Staphylococcus aureus. The order of MIC was PG $\cong$ DPG $\cong$ 1,3BG > HG > 1,2-PD > 1,2-HD $\cong$ 1,2-OD. The $2{\sim}3\;wt%$ of 1,2-HD(hexanediol) shows good anti-microbial effects in emulsions without allergenic response. Resistant index of 1,2-HD was less than 2 and this value was smaller than that of chemical preservatives. The mechanism of antimicrobilogical effect might be disturb the membrane of germs by investigating using electron microscope. Added to that, using this paradigm, low preservative contents, paraben-free system, and even preservative-free systems can be expected from these results.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.10-19
• /
• 2022

Humectants are chemical compounds which added to water based pigment inks for DTP (Digital Textile Printing) to prevent evaporation of water. The humectants usually have diol or triol type chemical structures and their -OH groups have possibility to react with functional groups of the binder polymers, such as ester, carboxylic acid, and urethane groups, acting as a crosslinking agent. The crosslinking reactions between polymer binders and humectants in inks can affect touch of the printed fabrics. In this regard, this study aims to investigate effect of chemical structures and added amounts of humectants in pigment ink on touch of dyed fabrics by using 1,6-hexanediol, ethylene glycol, diethylene glycol, and 1,4-buthanediol with various amounts added to the mixture of a black pigment and a polyurethane type binder. Then, color, rubbing strength, touch of the fabrics dyed with the prepared pigment inks were evaluated.

• Elastomers and Composites
• /
• v.57 no.3
• /
• pp.100-106
• /
• 2022

Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 2013

According to its merits about high curing speed and low emission of volatile organic compounds, UV curable inorganic-organic coating technology has been developed as an alternative for toxic and carcinogenic chromate-based treatments for years. It is consistently observed that ultra-thin films offer excellent corrosion protection as well as paint adhesion to metals. Based on the tetra-ethylorthosilicate(TEOS) and methacryloxypropyl trimethoxysilane(MPTMS), inorganic sol was synthesized and formed hybrid networks with UV curable acrylic monomer, 6-hexanediol diacrylate(HDDA), trimethylolpropane triacrylate(TMPTA), pentaerylthritol triacrylate(PETA). Several methods were used to test their properties such as salt spray test, potentiodynamic measurement, tape peel test, etc. It was shown that anti-corrosive property and stability of storage were affected by the molecular ratios of inorganic and organic compounds. It was not only the stability of storage, but had a excellent anti-corrosive, paint adhesive, and anti-solvent properties in a final molar ratios of 0.6/0.04/0.86/0.005 (TEOS/MPTMS/Acetone/HNO3) and 0.08/0.106/0.081/0.02 (TMPTA/HDDA/PETA/photo initiator).

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.341-349
• /
• 1996

To improve the dyeability of polyurethane (PU) resin, low molecular weight diols containing dye site in the molecular structure was added as a chain-extender. PU resin were synthesized with the variations in the chain extender, polyol type, and hard segment/soft segment (HS/SS) ratio. When HS/SS ratio is 1.4 and dimethylolpropionic acid(DMPA) or N-butyldiethanolamine (BDEA) was used as a chain extender, because of heterogeneity of reaction mechanical properties were diminished. But when N-methyldiethanolamine (MDEA) was used as a DCE, and HS/SS ratio lowed to 1.3, mechanical properties and dyeability improved. In particular, when linear type 1,4-BD was formulated with MDEA, hydrolysis resistance and mechanical properties of PTMG type PU was improved. And initial elasticity, tensile strength and elongation could be controlled by the variation of HS/SS ratio, DCE mixing ratio of 1,6-HD or NPG.

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.224-233
• /
• 2014

We prepared polyester-polyamines to improve the effect of carbon black dispersibility for use in thermal transfer ink, and synthesized polymeric dispersing agents by two-step reactions. In the first step, we made polyester by polycondensing 1,6-hexanediol and adipic acid. The resulting polymers had carboxylic acid, which was linked with polyamine via an acid-base reaction. We then characterized the polyester-polyamine structure by NMR spectroscopy and Fourier transform infrared spectroscopy (FT-IR). We also determined the basic characterizations such as total acid numbers (TAN) (5.0-67.5 mgKOH/g), hydroxyl values (27.1-67.5 mgKOH/g), and molar masses ($M_n=1.6-8.4kg\;mol^{-1}$) for the polyester and total base numbers (TBN) (15.3-57.1 mgKOH/g), hydroxyl values (33.0-79.8 mgKOH/g), and nitrogen contents (1.02-3.48%) for the polyester-polyamine polymers. We thus prepared thermal transfer ink using carbon blacks and the polyester-polyamine dispersing agents, and evaluated the resulting mixtures for printability, adhesive force, storage stability, ink appearance, ink gloss, and processability. These mixtures showed significant dispersibility for carbon black in the ink. Thus, we concluded that the dispersibility of the polymeric materials depended on the polyamine structure and the hydrophilicity-hydrophobicity distribution of the polymeric dispersants.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.168-179
• /
• 2018

The modified surface of specialty carbon black(SCB) is one of the main technical factors for producing a uniform color and stable dispersion. In this work, the carboxylation or sulfonation process of SCB was used to improve the dispersive properties of hydrophilic solvents such as 1,6-hexanediol and propylene glycol monomethyl ether acetate(PGMEA). The results showed that the color strength of SCB DC2500G changed little with a range of 0.128~0.941(${\Delta}E$) compared to other SCB DC2500G material. In contrast, in the case of SCB EG410, there was a uniform color value with a range of 0.144~0.252(${\Delta}E$). Also, in our experiments, a modified SCB was confirmed by printing ink material as a melt coating paper. It may be possible that the SCB EG410 material can be advantageous as a gravure ink product. Finally, the modified SCB obtained from this research will have a large impact on the industry as a potential material for toners, paint, rubber, fillers, and other carbon black additives.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.410-416
• /
• 2007

Monodisperse polymer particles were prepared via one- step seeded polymerization using PMMA as seed particles, and HDDA, triEGDMA or EGDMA as crosslinking monomer. For the study, the effects of 1) the ratio of the absorbed monomer to the seed polymer particles (swelling ratio), 2) the characteristics of crosslinking monomer, 3) electroless Ni plating, and 4) electroless Au Plating on the variation of mechanical properties of polymer particles, such as recovery rate, K-values, breaking strength and breaking displacement were investigated by using MCT (micro compression test). It was observed that swelling ratio of polymer particles influenced only on breaking strength of polymer Particles, while electroless plating did on recovery rate, K-values ($K_{10}\;and\;K_{20}$) and breaking strength of electroless plated polymer particles. However, breaking displacement and K-values ($K_{30}{\sim}K_{50}$) were more or less insensitive to electroless plating.