• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.478-485
• /
• 1998

The interior of open cavities exposed to a grazing flow is known to experience, strong periodic pressure, oscillations sustained for a wide range of flow velocities. In this study, an original approach was followed to develop a describing function model for the flow-excitation mechanism, governed by the shedding of discrete vortices within the shear layer over the orifice. A feedback loop analysis was performed to predict the frequency and the amplitude of the interior pressure fluctuations. Furthermore, a limit cycle stability analysis based on the extended Nyquist Stability criterion allowed the predictions of the onset and termination velocities for various modes. The analytical model was verified experimentally.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.220-223
• /
• 2007

Acoustic test of the payload fairing of Korea satellite launch vehicle was conducted to verify the performance of acoustic protection system installed inside the payload fairing. This paper briefly introduces the acoustic test procedures and its results. Overall 148 dB acoustic loads were exerted on the payload fairing structures which mated with the upper stage structure of the launch vehicle. In order to verify the increase of insertion loss by the acoustic protection system, two kinds of test were performed. One is conducted with acoustic protection system and the other without acoustic protection system. Internal acoustic loads as well as external ones were measured and the measured insertion losses were compared with the requirement. The results showed that the acoustic protection system increases the insertion loss by more than 6 dB above 125 Hz. They also indicated that some design modification of Helmholtz resonator array is required to increase the insertion loss at a cavity resonant frequency.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.51-56
• /
• 2017

This paper presents an approach of predicting the radiated noise due to the structural vibration by internal harmonic forces using the doubly asymptotic approximation (DAA). Acoustic transfer vector is derived from the Helmholtz integral equation and the fluid-structure interaction relation of DAA. Numerical results and analytical results of radiated noise for a cylindrical shell were compared and showed that they were consistent in most of frequencies and radiation directions, but showed errors in some radiated directions in the mid-frequency region. Despite these errors, the prediction method will be suitable for practical radiated noise prediction.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.337-340
• /
• 2001

The suction muffler of a reciprocating compressor is used for reducing noise produced by pressure pulsations. According to the shape, the suction muffler is classified into one-chamber type, two-chamber type, Helmholtz resonator type, pipe-resonator type, and so on. These mufflers are used according to the characteristics of the frequency of compressor noise. In this study, four pole parameters have been used for calculating Transmission Loss of the muffler, and Insertion Loss has been acquired for the optimum design of the muffler by the experiment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1727-1736
• /
• 1991

본 연구에서는 자체 제작된 헬름홀쯔형 맥동 연소기를 이용하여 작동원리와 연소특성을 조사함으로써 맥동연소현상을 물리적으로 이해하는 것이다. 주기적 화염 의 직접가시화, 연소장의 시간평균 온도 및 농도분포, 변동압력의 크기와 공기흡입량 을 조사함으로써 맥동에 영향을 미치는 요인이 무엇인지 그리고 이것이 어떠한 변화를 야기시키는가를 살펴보고자 한다. 이렇게 얻어진 결과의 종합을 통해 장치의 형상이 결정된 일반적인 맥동연소기가 자발적인 상태에서 작동될 때 작동결정인자가 무엇인가 를 알수가 있을 것으로 사료된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.457-464
• /
• 2001

The aeroacoustic phenomena in the simple rectangular open cavity are well published by many researchers. But the geometry shapes of aircraft landing gear wells, weapon bays, etc. are more complicate than that of the simple retangular cavity. They are more similar to the cavity having cover-plates at adges, or Helmholtz resonator. Therefore, the effects of cover-plates existing on edges of rectangular open cavity are numerically investigated in this paper. The compressible Navier-Stokes equations are solved for two-dimensional cavities with laminar boundary layers upstream. The high-order and high-resolution numerical schemes are used for the evaluation of spatial derivatives and the time integration. Physically correct numerical boundary conditions and buffer zone techniques are implemented to produce time-accurate solutions in the whole computation domain. The computational domain is large enough to directly resolve a portion of the radiated acoustic field. Results show that the cover-plates existing on edges of cavity reduce the noise convected from cavity, make the frequency of noise become higher, and change the directivity pattern. So these results can be used in the design of a low noise cavity.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.46-51
• /
• 2008

Honeycomb panel has a constructive advantage because it is constructed with a honeycomb core, so it has relatively higher strength ratio to weight. Therefore honeycomb panel has been used as the light weight panels in the high-speed railway technology and high-speed ship like as cruise yachts. Also it has been used in the aircraft and aerospace industry as a structural panel because light weight structure is indispensible in that field of industry. Recently, the honeycomb panel is embossed in the viewpoints of high oil prices as the lightweight panel of the transport machine, however the sound insulation capacity of the honeycomb panel is poorer than those of uniform and another sandwich panels. In this paper a method to improving the sound absorption coefficient of a honeycomb panel Is studied by using the Helmholtz resonator. The sound absorption coefficients for some kinds of honeycomb cores are demonstrated by the normal incident absorption coefficient method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.883-884
• /
• 2012

This study deals with design and application of silencer to reduce the exhaust noise, especially at the low frequency range below 200 Hz which is main contribution for the bridge wing noise and the external noise of ships. The designed silencer is composed of side branch resonator, Helmholtz resonator and absorbing material. The resonating frequencies of resonators are set to be the firing order frequencies of the generator engine. Based on the on-board measurement result, it is verified that the designed silencer can effectively reduce the exhaust noise of generator engine.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.685-686
• /
• 2015

This paper describes design results of the measurement system to test the properties of broadband AC magnetic field sensors used in weapon system. This measurement system consists of 3-axis helmholtz coil, signal generator, signal amplifier, sensor data acquisition unit and measurement & analysis controller including the operating software. This system is able to measure various properties of AC magnetic field sensor such as sensitivity, linearity and dynamic response in the frequency of 1 Hz to 10 kHz. The performance of this system was verified by measuring and analyzing the property of a MAG 639, standard magnetic field sensor of bartington instruments, with this developed system.

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.72-77
• /
• 2007

It is known that elimination of ship engine room noise is impossible thing, so the working environment in the engine room is getting worse because ships are recently built with huge engines to take higher sailing power. In the yacht and cruise yacht, the engine room noise is more serious because they have bigger engines relative to their hull sizes. The noise generated from the main engine makes the employee to hearing loss and the transmitted noise make the uncomfortable conditions in the cabins of ship. The noise generated by ship engine must be attenuate for the employee and passenger. In yacht and cruise yacht, the noise levels in cabines are the most important criterions to the value of commodities. In this study, the noise absorbtion barrier which have resonators is experimentally studied by the 1/3 octave band noise elimination rates(%).