• Journal of Institute of Convergence Technology
• /
• v.12 no.1
• /
• pp.1-5
• /
• 2022

This paper describes an algorithm for generating a terrain using a noise function and a height map as one of the procedural terrain generation methods. The polygon mesh data structure to represent the generated terrain concisely and render it is also described. The Perlin noise function is used as the noise technique for terrain mesh, and the height data of the terrain is generated by combining the four noise waves. In addition, the terrain height information can be also obtained from actual image data taken from the satellite. The algorithm presented in this paper generates the geometry part of the polygon topography from the height data obtained, and generated a material for texture mapping with two textures, that is, a diffuse texture and a normal texture. The validity of the terrain method proposed in this paper is verified through application examples, and its possibility can be confirmed through performance verification.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.3
• /
• pp.443-448
• /
• 2013

PURPOSE: In recent years, senior friendly device is growing rapidly because of population aging The study was designed to investigate the effects of table height of electronic bed on upper extremity and trunk EMG in elderly. METHODS: Thirty right-handed elderly without history of neurological and musculoskeletal dysfunction were participated in this study. Three heights of the table (3/3 height, 2/3 height, and 1/3 height between top of the shoulder and olecranon) were provided. During the eating performance, surface electromyography (EMG) was used to measure muscle activity, and electrodes were attached to the deltoid middle fiber, serratus anterior, suprapinatus, upper trapezius, rhomboideus, cervical part of longissimus, thoracic part of longissimus, lumbar part of longissimus on right. One way ANOVA was conducted for the statistical analysis. RESULTS: There were significant differences in deltoid middle fiber, suprapinatus, upper trapezius, rhomboideus, lumbar part of longissimus in the 3 different height of table (p<.05). The deltoid middle fiber, suprapinatus, upper trapezius, and lumbar part of longissimus were significantly increased in higher table than lower table(p<.05). And the rhomboideus was significantly decreased in higher table than lower table(p<.05). CONCLUSION: This study demonstrates that different height of table affect upper extremity and trunk muscle activity. The table height of olecranon is the best for elderly.

• The Research Journal of the Costume Culture
• /
• v.23 no.4
• /
• pp.604-615
• /
• 2015

The objectives of this study were to investigate whether heel height changes in the U.S. market occur in a cyclical pattern and heel heights show greater within-year variability over time. Heel height data from U.S. Vogue's spring and fall editions were analyzed over the time period 1950~2014. A total of 1581 pieces of data were measured in millimeter units using Adobe Illustrator and standardized by dividing the height of the heel by the shoe length through the curved sole line. To analyze the cycle pattern of heel heights, the yearly averages were standardized by using three-year moving average technique to average out the irregular components of time series data and give a better indication of the long-term fluctuation of heel height. To identify the degree of within-year variability of heel height, the standard deviation of the average measurements for a year was calculated, and then decade averages were drawn from the yearly averaged standard deviation. One-way ANOVA was conducted to compare the within-year variability of data in heel height over the time period studied by decade. The results showed: First, there was a trend toward higher heels from the early 1950s to 2011. Second, four cyclical movements of heel height were observed from 1950 to 2007, and heel heights gradually decreased after 2008. Third, the within-year variability significantly increased over time, especially after the 1980s.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.65-73
• /
• 1999

Most psychophysical studies in manual material handling (MMH) have paid more attention to two-handed MMH activities than to one-handed MMH activities. Also, studies are involved only with single MMH activities - lifting, lowering, carrying, holding, pushing or pulling. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (lifting a box, then carrying the box, and lowering the box). The objective of this study was to find the psychophysical and physiological responses of human subjects from a simulated industrial task involving one-handed and two-handed combined tasks. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks - lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box from knuckle to floor height - were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. In addition to maximum acceptable weight, heart rate and RPE values on wholebody, back, and arm were also measured as responses.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2015

Purpose: The ratio of straw to grain mass as a function of cutting height affects combine efficiency and power consumption and is an important input parameter to combine simulation models. An equation was developed to predict straw to grain ratios for wheat as a function of cutting height. Methods: Two mass functions, one for straw and one for grain, were developed using regression techniques and measured data collected in west Texas during the summer, and used to predict the straw to grain ratio. Results: Three equations were developed to facilitate the simulation of a combine during wheat harvest. Two mass functions, one for straw and one for grain, were also developed; a quadratic equation describes the straw mass with an $R^2$ of 0.992. An S-shaped curve describes the mass function for grain with an $R^2$ of 0.957. An equation for straw to grain ratio of wheat was developed as a function of cutting height. The straw to grain ratio has an $R^2$ value of 0.947. Conclusions: In all cases, the equations had $R^2$ values above 0.94 and were significant at the 99.9 percent probability level (alpha = 0.001). Although all three equations are useful, the grain mass and straw to grain ratio equations will have direct application in combine simulation models.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.371-378
• /
• 2014

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

• Journal of Plant Biology
• /
• v.15 no.4
• /
• pp.1-12
• /
• 1972

To study on the annual height growth of Pinus densiflora within natural pine stands in central Korea, twenty two pure closed Pinus densiflora stands were selected subjectively in the west-central region of Korea. In each stand twenty trees were chosen randomly. For each tree, abotu ten to fifteen measurements of internodal lengths were made from leader top to trunk base. A total of one hundred thirty four soil samples was collected. Each soil sample was bulked with three subsamples. The ranges of the growth measurements per stand, per tree and per observation were 14.9-35.4cm, 9.0cm-54.4cm and 2.4cm-69.0cm respectively. The total mean value was 23.5cm. The Student-Newman-Keul's tests for the multiple comparison among the mean values of the height growth per stand were very highly significant. The resutls of the analysis of variance of the height growth data for the selected fifteen stands among the twenty two stands indicate that sampling efficiency might be increased to 744% if measurement of the growth were made on fifteen trees per stand from twenty stands instead of twenty trees per stand from fifteen stands. The annual height growths of Pinus densiflora and Pinus koraiensis for the period from 1960 to 1968 were 21.74$\pm$5.29cm (10) and 20.56$\pm$5.59cm (10) respectively. The total means of easily-soluble phosphorus, total nitrogen, loss on ignition and pH for the soil samples were 2.8 ppm, 0.09%, 5.4% and 4.7 respectively. The ranges of those amounts were 18.7-1.7ppm, 0.17-0.05%, 11.6%-3.1%, 3.9-5.1 respectively. The relationship of the annual height growth of P. densiflora to soil was studied in terms of standard partial multiple regression. Among soil properties such as non-capillary pore space, capillary pore space, maximum field capacity, loss on ignition, soil reaction, total nitrogen and easily-soluble phosphoros investigated, the easily soluble phosphorus in one analysis and loss on ignition and soil reaction in the other analysis seem to have significant positive influence on the annual height growth.

• The Journal of Pediatrics of Korean Medicine
• /
• v.37 no.3
• /
• pp.121-132
• /
• 2023

Objectives We aimed to confirm whether Humulus japonicus Extract Powder can enhance child height growth significantly and safely compared with a placebo. Methods A total of 150 children between the 3rd and 25th percentiles in height and between the ages of 6 and 9 years will be recruited to participate in this randomized, double-blind, placebo-controlled clinical trial. The participants will be randomly assigned to the treatment or placebo group. Participants in the treatment group will take one pack per day (700 mg of Humulus japonicus Extract Powder) for 24 weeks. Participants in the placebo group will take one package of placebo per day (0 mg of Humulus japonicus Extract Powder) for 24 weeks. The primary outcome will be a change in height after 12 weeks, and the secondary outcomes will be the height after 24 weeks, growth rate, height standard deviation, growth hormone, insulin-like growth factor-1 (IGF-1), insulin-like growth factor binding protein-3 (IGFBP-3), bone alkaline phosphatase (BALP), and osteocalcin after 12 and 24 weeks. Results This protocol was approved by the Institutional Review Board (IRB) of the Korean Medicine Hospital of Busan University (IRB No. PNUKHIRB-2023-03-002). Research participants will be recruited from June 2023 to December 2023. Conclusions The results of this study provide clinical information regarding the effectiveness and safety of the Humulus japonicus Extract Powder in increasing child height.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.389-401
• /
• 2011

Most nations around the world have expressed significant concern in the climate change due to a rapid increase in green-house gases and thus reach an international agreement to control total amount of these gases for the mitigation of global warming. As the most important absorber of carbon dioxide, one of major green-house gases, forest resources should be more tightly managed with a means to measure their total amount, forest biomass, efficiently and accurately. Forest biomass has close relations with forest areas and tree height. Airborne LiDAR data helps extract biophysical properties on forest resources such as tree height more efficiently by providing detailed spatial information about the wide-range ground surface. Many researchers have thus developed various methods to estimate tree height using LiDAR data, which retain different performance and characteristics depending on forest environment and data characteristics. In this study, we attempted to investigate such various techniques to estimate tree height, elaborate their advantages and limitations, and suggest future research directions. We first examined the characteristics of LiDAR data applied to forest studies and then analyzed methods on filtering, a precedent procedure for tree height estimation. Regarding the methods for tree height estimation, we classified them into two categories: individual tree-based and regression-based method and described the representative methods under each category with a summary of their analysis results. Finally, we reviewed techniques regarding data fusion between LiDAR and other remote sensing data for future work.

• Journal of Digital Contents Society
• /
• v.7 no.1
• /
• pp.9-14
• /
• 2006

In this paper, we propose the algorithm that automatically measures the height of the object to move on the base plane by using the geometric information. To extract a moving object from images, we use the difference image and morphology operation. The top and bottom point of an object are extracted by the histogram vertical projection in the extracted region. The two points, top and bottom, are used for measuring the height. Given the vanishing line of the ground plane, the vertical vanishing point, and at least one reference height in the scene; then the height of any point from the ground may be computed by specifying the image of the point and the image of the vertical intersection with the ground plane at that point. Through a confidence valuation of the height to be measured, we confirmed similar actual height and result in the simulation experiment.