• Journal of Environmental Impact Assessment
• /
• v.15 no.4
• /
• pp.271-277
• /
• 2006

In this study, we investigated the applicable plan of GIS on the environmental impact assessment of 60 Hz Powerline. So we assessed distance data based on calculations by use of 2D and 3D Geographical information systems(GIS) and distance data based on measurements on 1: 5000 maps accord with on site distance measurements to use input data for calculating magnetic field. One hundred eight of the on site measured addresses were selected from residences. The data were achieved by measuring the distance between residence and power line on maps with scales of 1: 5000. The digital map was obtained from National Geographic Information Institute with scales of 1: 5000, and we made 2D and 3D map. Correlation analyses were performed for statistical analyses. For the 3D GIS versus on site comparison of different exposure categories, 70 of 108 measurements were assigned to the correct category. Similarly for 2D GIS versus on site comparison, 71 of 108 were correctly categorized. When comparing map measurement with on site measurement, 62 of 108 were correctly categorized. When the correlation analysis was performed, best correlation was found between 3D GIS and on site measurements with r = 0.84947 (p<0.0001). The correlation between map and on site measurement yielded an r of 0.76517 (p<0.0001). Since the GIS measurements and map measurement were made from the center point in the building and the on site measurements had to be made from the closest wall on the building, this might introduce and additional error in urban areas. The difference between 2D and 3D calculations were resulted from the height of buildings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1355-1360
• /
• 2020

In a map, placing the labels, corresponding to names or explanations of specific features, is called map labeling. In this paper, n points on a line are given, and placing rectangular labels for the points is considered. Particularly, the labels have a same height and their lower sides lie on a straight line in the upper of the line on which the given points are. The points and the labels are connected by polygonal lines, which are called leader lines. The leader lines are classified into straight leader lines and bended leader lines, where the straight leader line consists of only the vertical line and the bended leader line consists of vertical, horizontal, vertical lines. The problem is placing the labels to minimize the number of bended leader lines, and we propose an O(nlogn)-time algorithm, which improves the O(n2)-time algorithm previously provided in [13].

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.17-26
• /
• 2005

In this paper we propose three nonparametric tests such as Wilcoxon test, Median test and Van der Waerden test, based on linear rank statistics for detecting edges in images. The methods used herein are based on detecting changes in gray-levels obtained using an edge-height parameter between two sub-regions in a 5$\times$5 window We compare and analysis the performance of three statistical edge detectors in terms of qualitative measures with the edge maps and objective, quantitative measures.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.633-636
• /
• 2004

Airborne laser scanning thechnology has been studied in many applications, DSM(Digital Surface Model) development, building extraction, 3D virtual city modeling. In this paper, we will evaluate the possibility of airborne laser scanning technology for transportation application, especially for recognizing moving vehicles on road. First, we initially segment the region of roads from all LiDAR DATA using the GIS map and intensity image. Secondly, the segmented region is divided into the roads and vehicles using the height threshold value of local based window. Finally, the vehicles will be classified into the several types of vehicles by MDC(Minimum Distance Classification) method using the vehicle's geometry information, height, length, width, etc

• Journal of Korea Game Society
• /
• v.8 no.1
• /
• pp.71-77
• /
• 2008

The geometric structure constructs terrain from height map and non-periodically tiling with Wang tile for the detail description. It will be able to express detail bump using parallax mapping to add decal data together with height data in tile. We solve the problem when the real-time rendering and propose improving of parallax mapping for the terrain.

• New & Renewable Energy
• /
• v.5 no.4
• /
• pp.3-8
• /
• 2009

This global case study pursues diversification and intensification for an application system of the national wind atlas which has been developed to support national strategy building and promotion of wind energy dissemination. We chose nine counties' national wind atlas and compared their map area, extraction height, temporal and spatial resolutions, download services, etc. to derive a best practice for the Korea wind atlas application system. Therefore, the web service content is designed to offer high-resolution height information of which covers wind turbine rotor sweeping area and time-series dataset which can be downloaded for further analysis by users. It is anticipated that the system and web service would contribute greatly to wind energy policy making, business and research sectors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.397-405
• /
• 2015

Currently, Korea's digital maps are being produced through traditional aerial photogrammetry methods. Aerial photogrammetry is the most economical way to produce a map of a wide area. However, timely survey is not allowed depends on weather condition and it is inefficient for small area surveying in economic point of view. Therefore, it costs too much and needs long time to produce a map for various small areas where are terrestrial changes for updating the map. In contrast, UAV photogrammetry is possible to work even in cloudy weather because of shooting at low altitude below the clouds. It also has excellent mobility and shoot quickly and well suited for small-scale mapping in several places by low cost. In this study, we produced an ortho-photo and digital map with the UAV photogrammetry method using SIFT and SfM algorithm and verified its accuracy to evaluate the applicability for future digital map updates. The accuracy was verified by comparing the results of the ground survey for check points selected on the digital map. Test results show small errors at ±2.6cm in X coordinates, ±2.8cm in Y coordinates and ±5.8cm in height and we could find a possibility that UAV photogrammetry would be fully applicable for digital map updating.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.274-284
• /
• 2022

To use kenaf (Hibiscus cannabinus L.) as a fiber and livestock feed, a high-yielding variety needs to be identified. For this, accurate phenotyping of plant height is required for this breeding purpose due to the strong relationship between plant height and yield. Plant height can be estimated using RGB images from unmanned aerial vehicles (UAV-RGB) and photogrammetry based on Structure from Motion (SfM) algorithms. In kenaf, accurate measurement of height is limited because kenaf stems have high flexibility and its height is easily affected by wind, growing up to 3 ~ 4 m. Therefore, we aimed to identify a method suitable for the accurate estimation of plant height of kenaf and investigate the feasibility of using the UAV-RGB-derived plant height map. Height estimation derived from UAV-RGB was improved using multi-point calibration against the five different wooden structures with known heights (30, 60, 90, 120, and 150 cm). Using the proposed method, we analyzed the variation in temporal height of 23 kenaf cultivars. Our results demontrated that the actual and estimated heights were reliably comparable with the coefficient of determination (R²) of 0.80 and a slope of 0.94. This method enabled the effective identification of cultivars with significantly different heights at each growth stages.

• Bulletin of the Korean Mathematical Society
• /
• v.26 no.2
• /
• pp.135-137
• /
• 1989

Let R be a Krull domain with field of fractions K. By Br(R) we denote the Brauer group of R. Studying the Kernel of the homomorphism Br(R).rarw.Br(K), Orzech defined Brauer groups Br(M) for different categories M of R-modules [4]. In this paper we show that an algebra A in Br(D) is a maximal order in A K and that the map Br(D).rarw. Br(K) is one to one. We note here few conventions. All rings are Krull domains and all modules will be unitary. By Z we donote the set of height one prime ideals of a Krull domain.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.11-20
• /
• 2010

In this study, the effects of stand height growth on GIS-based viewshed analysis were investigated. DSM was created by combining stand height layers on DEM using map algebra functions. In developing the tree height layers, the digital forest-type maps, forest site maps and stand yield tables of Korea Forest Research Institute were used. The time horizon for viewshed analysis were 40 years. Two viewpoints in crossings of downtown for viewshed analyses were chosen using a projective mapping technique. The effects of tree height growth over time on visibility were measured in terms of the depth of blind areas and the area of visible regions. The results of viewshed analyses show that 17% of visible regions is reduced when we use DSM instead of DEM. As the tree height grows, the visibility gets worse and worse and the depth of blind area increases.