• Journal of Preventive Medicine and Public Health
• /
• 제32권1호
• /
• pp.60-64
• /
• 1999

환경오염과 관련된 건강효과 연구에서 흡연, 직업 등 교란변수의 영향을 효과적으로 배제할 수 있으면서 폐기능검사가 제대로 시행될 수 있는 연구대상으로 선호되고 있는 특정 연령층인 12세 학동의 보다 정확한 FVC와 FEV1 예측식을 만 들고자 전국 11개 중학교의 학생들(남자 256명, 여자 301명)을 대상으로 측정된 신장, 체중, 그리고 폐기능검사 값으로 신장-체중의 회귀식을 유도하였고, 이를 통해 12세 인구의 신장별 표준체중을 산출하였다. 이 표준체중과 실측체중의 차이인 잔차를 독립변수로 하여 폐기능 예측 식을 남녀별로 만들었는데, 남자의 경우는, FVC(ml) = 50.84 $\times$ 신장(cm) + 7.06 $\times$ 체중 잔차 - 4838.86, FEV1(m1) = 43.57 $\times$ 신장(cm) + 3.16 $\times$ 체증 잔차 4156.66 이었다. 여자에서는 FVC(ml) = 42.57 $\times$ 신장(cm) + 12.50 $\times$ 체중 잔차 - 3862.39, 그리고 FEV1(ml) = 36.29 $\times$ 신장(cm) + 7.74 $\times$ 체중 잔차 - 3200.94 이었다. 이렇게 얻어진 예측값들의 설명력(R2)은 남자에서 FVC, FEV1가 각각 0.708, 0.670이었고, 여자에서는 FVC, FEV1가 각각 0.580, 0.513이었다.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.47-51
• /
• 2010

도로를 주행하는 차량들을 구분하는 차종자료는 도로 및 포장의 설계와 관리 등 여러 분야에서 기초자료로 활용되고 있다. 본 연구에서는 차종구분에 차량높이라는 분류기준을 적용하기 위해 주행하는 차량의 높이를 계측할 수 있는 방법을 고안하고 현장에 장비를 설치한 후 실험을 통해서 차량길이와 차량최고높이 자료를 획득하였다. 차량높이 측정과 동시에 동영상을 촬영하여 국토해양부 12종 차종분류에 의거하여 차종분류 기준값을 작성하였다. 영상을 통해 작성된 차종자료 기준값과 측정된 차량길이와 차량높이를 토대로 판별함수를 이용한 차종분류값을 서로 비교한 결과 88.6%의 차종정확도를 확인하였다. 이를 통해 차량높이라는 분류기준을 적용하여 차종분류에 활용할 수 있는 방안을 제시하였다.

• 복식문화연구
• /
• 제9권1호
• /
• pp.33-43
• /
• 2001

In this study, both kinds of materials, that is, leather and woolen fabrics, which have similar thickness, have been adopted. To determine proper length of ease, not only sleeve cap height but also sleeve width has been adjusted mainly based on 5cm length of the ease, which follows maximum sleeve cap height, and then different length of ease, for example, 4cm, 3cm, 2cm and 1cm of ease, have been made. As a result, eighteen kinds in total of sleeves have been made: In other words, each nine kinds of both leather and woolen fabrics have different ease lengths. In addition, each sleeve has been inspected visually and functionally. Following conclusion has been gotten based on outcome of the study: 1. Proper ease length for manufacture of leather garment is said to be 1∼2 cm. As a result, ease length with higher sleeve cap height shall be 1∼2cm, while the length with lower sleeve cap height shall be 1cm or less. 2. Wider sleeve width has better function. Considering relations with sleeve cap height, sleeve width shall exceed +4cm of bicep line. 3. to satisfy a variety of those conditions while manufacturing leather garment, sleeve cap height, which is used for the manufacture of full dress and street wear garment, To lessen the ease length, body A.H shall be relatively loose under the arms, or pad shall be supplemented on the shoulder, so that the difference had better be lessened to solve such problems.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.479-483
• /
• 2004

A new calculation method of expected overtopping probability of rubble mound breakwater considering real tide occurrence has been proposed. A calculation method of expected overtopping probability of rubble mound breakwater was proposed by Kweon and Suh (2003). In their calculation, the fluctuation of tidal elevation was expressed by the sinusoidal change that yields the uniform distribution of occurrence frequency. However, the realistic distribution of tidal elevation should influence on the overtopping chance. In this study, the occurrence frequency of tidal elevation obtained from the real sea is included. The tidal elevation used in this study is collected from the east coastal part of Korean peninsular. Analyzing the annual data of the tidal fluctuation measured hourly during 355 days, the distribution of occurrence frequency is formulated utilizing by the normal distribution with one peak. Among the calculation procedures of annual maximum wave height, wave height-period joint distribution, wave run-up height and occurrence frequency of tide, only the annual maximum wave height is again chosen randomly from normal distribution to consider the uncertainty. The others are treated by utilizing the distribution function or relationship itself, It is found that the inclusion of the variability of tidal elevation has great influence on the computation of the expected overtopping probability of rubble mound breakwater. The bigger standard deviation of occurrence frequency is, the lower the overtopping probability of rubble mound breakwater is.

• 한국해안·해양공학회논문집
• /
• 제27권4호
• /
• pp.274-279
• /
• 2015

동해 중부에 위치한 속초항 연안에서 약 11년간 취득한 파랑자료를 스펙트럼법과 파별분석법을 사용하여 분석하고 대표적인 파랑 특성을 검토하였다. 유의파고는 동계에 크고 하계에 작으며, 첨두주기도 동계에 길고 하계에 짧은 특성을 나타내었다. 관측된 최대 유의파고는 8.95 m 였으며 동해선풍에 의하여 발생되었다. 유의파고와 첨두주기 모두 그 분포 형태를 Generalized Gamma 및 Generalized Extreme Value 분포함수보다는 Kernel 분포함수가 보다 잘 재현하였다. 한편, 인근 해역에서의 설계 및 시공에 도움을 줄 수 있도록 파고 자료를 월별 및 파고 구간별로 세분하고 누적출현율을 제시하였다.

• 한국해안·해양공학회논문집
• /
• 제27권2호
• /
• pp.142-147
• /
• 2015

동해 중북부에 위치한 대진항 북측 연안에서 7년간 취득한 파랑자료를 스펙트럼법과 파별분석법을 사용하여 분석하고 대표적인 파랑 특성을 검토하였다. 유의파고는 동계에 크고 하계에 작으며, 첨두주기도 동계에 길고 하계에 짧은 특성을 나타내었다. 관측된 최대 유의파고는 6.59 m였으며 1216호 태풍 산바(SANBA)에 의하여 발생되었다. 유의파고와 첨두주기 모두 그 분포 형태를 Generalized Gamma 및 Generalized Extreme Value 분포함수보다는 Kernel 분포함수가 보다 잘 재현하였다. 한편, 인근 해역에서의 설계 및 시공에 도움을 줄 수 있도록 파고 자료를 월별 및 파고구간별로 세분하고 누적출현율을 제시하였다.

• 대한인간공학회지
• /
• 제28권4호
• /
• pp.9-15
• /
• 2009

Our study goal is to find out how the table height influences functional ability of upper extremity to patients with stroke when they are having therapy. In this study, we tested forty patients with stroke at the age of over sixty-five who do not have visual, auditory disability and have no difficulty in communicating and moving things by using upper extremity. And they were able to pinch grip in hospital. We used occupational table for occupational therapy as Lab Materials. We also used cube and pegs board to test upper extremity functional ability. We used occupational table for occupational therapy as Lab Materials and we used cube and pegs board to test upper extremity functional ability. The method is that we measured the recommended table height that takes the subjects' size into consideration and patients' preferred table height and therapists' preferred table height and we applied them and then we have done a comparative analysis and set significance level(p<0.05). As the result, we found the Statistically significant between the recommended height and the other two, which are patients' preferred height and therapists' preferred height. We also discovered that functional ability of upper extremity varies significantly depending on each table height. We came to a conclusion that the table height had effects on the upper extremity functional ability of patients with stroke who are over sixty-five years old. It is therefore considered that the proper table height is important to improve upper extremity functional ability of patients with stroke for their physical therapy.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.29-34
• /
• 2008

In this paper, we investigated electrical and physical characteristics of nickel silicide using rare-earth metals(Er, Yb, Tb, Dy), Incorporated Ytterbium into Ni-silicide is proposed to reduce work function of Ni-silicide for nickel silicided schottky barrier diode (Ni-silicided SBD). Nickel silicide makes ohmic-contact or low schottky barrier height with p-type silicon because of similar work function (${\phi}_M$) in comparison with p-type silicon. However, high schottky barrier height is formed between Ni-silicide and p-type substrate by depositing thin ytterbium layer prior to Ni deposition. Even though the ytterbium is deposited below nickel, ternary phase $Yb_xN_{1-x}iSi$ is formed at the top and inner region of Ni-silicide, which is believed to result in reduction of work function about 0.15 - 0.38 eV.

• Wind and Structures
• /
• 제21권2호
• /
• pp.119-158
• /
• 2015

The characteristics of the coherence functions of X axial, Y axial, and RZ axial (i.e., body axis) wind forces on the Shanghai World Trade Centre - a 492 m super-tall building with section varying along height are studied via a synchronous multi-pressure measurement of the rigid model in wind tunnel simulating of the turbulent, and the corresponding mathematical expressions are proposed there from. The investigations show that the mathematical expressions of coherence functions in across-wind and torsional-wind directions can be constructed by superimposition of a modified exponential decay function and a peak function caused by turbulent flow and vortex shedding respectively, while that in along-wind direction need only be constructed by the former, similar to that of wind speed. Moreover, an inductive analysis method is proposed to summarize the fitted parameters of the wind force coherence functions of every two measurement levels of altitudes. The comparisons of the first three order generalized force spectra show that the proposed mathematical expressions accord with the experimental results well. Later, the influences of coherence functions on wind-induced dynamic responses are analyzed in detail based on the proposed mathematical expressions and the frequency-domain method of random vibration theory.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.86-92
• /
• 2010

In GMAW processes, bead geometry is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage, welding speed, shielding gas and so on. Thus the welding condition has to be selected carefully. In this paper, an experimental method for the selection of optimal welding condition was proposed in the root pass welding which was done along the GMA V-grooved butt weld joint. This method uses the response surface analysis in which the width and height of back bead were chosen as the quality variables of the weld. The overall desirability function, which is the combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. Through the experiments, the target values of the back bead width and the height were chosen as 4mm and 1mm respectively for the V-grooved butt weld joint. From a series of welding test, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.