• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.142-152
• /
• 2014

In this study, generic characteristics of the acid mine drainage (AMD), removal efficiency of iron, aluminium and manganese by chemical treatment, electrolysis and hybrid process using electrolysis after neutralization were evaluated. The pH of AMD was inversely proportional to the rainfall. In dry-season, the average pH of AMD was ranged from 4.5 to 5.5, showing slight variation. However, the pH of AMD was gradually decreased along with rainfall and dropped to 3.02 in September showing the greatest rainfall. Removal efficiency of heavy metals by chemical treatments using three different neutralizing agents or by electrolysis was low. However, a hybrid process performed with electrolysis after addition of neutralization shows higher removal capacity for heavy metal ions than neutralization-alone and electrolysisalone process.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.417-426
• /
• 2010

In this study, ten different bio-adsorbents were prepared by immobilization of vegetable tannins such as mimosa(Catechol Tannin) and chestnut(Pyrogallol Tannin) on the collagen matrix which was derived from during leather manufacturing processing. Removal efficiency of Cu(II), Cd(II), Zn(II), Pb(II), Cr(III) by each bio-adsorbent in synthetic wastewater was evaluated by a laboratory-scale batch reactor at different reaction conditions. When mimosa was used as a vegetable tannin, the penetration efficiency of mimosa into the inner bundle of fiber depended on the dose of the naphthalene condensated penetrant; 3% ${\geq}$ 1.5% > 0%. For all bio-adsorbents, removal of heavy metal ions was not observed below pH 3.0 but was rapidly increased between pH 3.0 and 6.0, showing near complete removal of all heavy metal ions except Zn(II) above pH 6.0. Removal of Cr(III) was quite similar for all bio-adsorbents while removal of Cu(II), Zn(II) and Pb(II) was higher by bio-adsorbents immobilized with chestnut than that by mimosa. Adsorption of Pb(II) and Cu(II) by S10 bio-adsorbent was little affected by the presence of monovalent and divalent electrolytes as well as variation of 1000 times ionic concentration with $NaNO_3$.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.167-175
• /
• 1992

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-Pl zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-Pl exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for Pb2+ ion. The metal ion selectivity of Na-Pl was determined in a decreasing order : $Pb^{2+}$>$Cd^{2+}$>$Cu^{2+}$+>$Zn^{2+}$>$Fe^{3+}$

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.307-312
• /
• 2001

Adsorption capacities of toxic heavy metal ions using as-received carbon(AC), single and double surface-modified activated carbon(OAC and DSMC) in wide pH ranges are extensively evaluated. Physical and chemical properties of surface-modified activated carbons are evaluated through BET analysis, surface acidity and oxides measurements. Based oil tile adsorption isotherms of Pb, Cd and Cr ions by AC, OAC and DSMC, the adsorption amount on DSMC was obviously higher than that on the other carbons. Breakthrough behaviors of ternary metal ions in a column packed with three kinds of carbon were also characterized with respect to the variations of the influent pH and concentration. The adsorption capacity of DSMC in a fixed bed stood a favorable comparison with that of as-received carbon.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.2
• /
• pp.167-175
• /
• 1997

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-P1 zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-P1 exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for $Pb^{2+}$ ion. The metal ion selectivity of Na-P1 was determined in a decreasing order : $Pb^{2+}>Cd^{2+}>Cu^{2+}>Zn^{2+}>Fe^{3+}$.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3788-3792
• /
• 2012

Spherical-shape melanin nanoparticles with good water-dispersibility were successfully synthesized by a simple oxidation polymerization of 3,4-dihydroxy-phenylalanin (DOPA) with $KMnO_4$. Similar features to those known from natural and synthetic melanin polymers were observed from prepared melanin nanoparticles by FT-IR, UV-Vis., and ESR spectroscopic methods. Their binding ability with several heavy metal ions from aqueous solution was quantitatively investigated, and the maximum binding capacities with melanin nanoparticles to lead, copper, and cadmium ions were obtained as 2.45, 2.17 and 1.88 mmol/g, respectively, which are much larger values than those reported from natural and synthetic melanin polymers. The large binding capacity and fast binding rate of melanin nanoparticles to metal ions can make them an excellent candidate for the remediation of contaminated water.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.93-102
• /
• 2023

This study investigated the possibility of treating heavy metal pollutants existing in the air in addition to simultaneously removing NOx and SOx by injecting oxidizing and reducing agents into a scrubber into a microbubble device to create an eco-friendly method that does not generate secondary pollutants. Lead compound (Pb) was selected as the heavy metal substance in the air to be treated with microbubbles, and the removal efficiency was confirmed. By treating microbubbles by connecting them to a scrubber, it was confirmed that not only NOx and SOx but also heavy metal substances in the air were reduced, cost was reduced, and secondary environmental pollutants were not generated. Through this study, it was possible to simultaneously remove NOx, SOx, and heavy metals at low cost by applying an eco-friendly method, rather than the existing high-cost treatment method such as SCR. If oxidizing agent, reducing agent, and microbubbles are used appropriately, economical and efficient air pollution can be achieved. Since material processing was possible, it is expected to be helpful in the technological development of environmental prevention facilities.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.15-24
• /
• 2014

This study was performed to investigate the removal characteristics of heavy metals in Acid Mine Drainage (AMD) using pellet-type Zeolite-StarFish ceramics (ZSF ceramics), in which natural zeolite and starfish were mixed and calcined with wood flour. Kinetic experiment showed the removal reaction of heavy metals by ZSF ceramics reached the equilibrium status within 3 hours. The optimal calcination temperature range for removal of heavy metals was measured to be $800{\sim}1,000^{\circ}C$. The calcination time had little effect on the removal of heavy metal in AMD. The adequate dose of ceramics was shown to be 1.0~1.2 % for removal of heavy metals in AMD. High removal efficiencies of heavy metals (Al, As, Cd, Cu, Fe, Mn, Zn) in AMD, more than 95 % except for Pb, were obtained under the condition of dose of ceramics more than 1.0 %. The removal efficiencies of heavy metals increased with increasing mixing concentration of wood flour. The adequate mixing concentration of wood flour was observed to be 10 %. The batch experimental results exhibited that the ZSF ceramics could act as an efficient ceramics for removal of heavy metals in AMD and the wood flour could provide porous ZSF ceramics with enhanced removal efficiency of heavy metals.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.119-122
• /
• 2005

As it is known that the korean coastal fishing areas are getting contaminated by heavy metals from the sediment, the authors conducted the experiments to treat the heavy metals with bioleaching process. As a result, it is found that (1) acidification for the leaching of heavy metals is effectively processed when adding more than $0.3\%$ of sulfur and $0.1\%$ of ferrous sulfate. and (2) copper is rapidly solubilized irrespective of addition of sulfur, while solubilization is not processed even of FeS is added., and (3) bioleaching with sulfur and FeSO4 is possible method to effectively treat the heavy metals form the contaminated sediments.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.275-278
• /
• 2002

In this study, to increase removal efficiency of traditional electrokinetic treatment and to reduce contaminant load of wastewater that discharged through cathode compartment, enhanced electrode compartments were investigated. Hydroxide precipitation near the cathode electrode that encounter during traditional electrokinetic treatment were prevented by enhanced electrokinetic remediation test with newly invented electrode compartment. And heavy metal concentration in wastewater showed 0 ppm thus, additive post-treatment cost were not needed.