• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.733-743
• /
• 2016

The purpose of this study is to present a rational depreciation method for a pyroprocess cost calculation. Toward this end, the so-called advanced decelerated depreciation method (ADDM) was developed that complements the limitations of the existing depreciation methods such as the straight-line method and fixed percentage of declining-balance method. ADDM was used to show the trend of the direct material cost and direct labor cost compared to the straight-line or fixed percentage of the declining-balance methods that are often used today. As a result, it was demonstrated that the depreciation cost of the ADDM, which assumed a pyroprocess facility's life period to be 40 years with a deceleration rate of 5%, takes up 4.14% and 27.74% of the pyroprocess unit cost ($781/kg heavy metal) in the $1^{st}$ and final years, respectively. In other words, it was found that the ADDM can cost the pyroprocess facility's capital investment rationally every year. Finally, ADDM's validity was verified by confirming that the sum of the depreciation cost by year, and the sum of the purchasing cost of the building and equipment, are the same.

• International Journal of Korean Welding Society
• /
• v.1 no.2
• /
• pp.36-44
• /
• 2001

To get the appropriate welding process variables, mathematical modeling in conjunction with many experiments is necessary to predict the magnitude of weld bead shape. Even though the experimental results are reliable, it has a difficulty in accurately predicting welding process variables for the desired weld bead shape because of nonlinear and complex characteristics of welding processes. The welding condition determined for the desired weld bead shape may cause the weld defect if the welding current/voltage/speed combination is improperly selected. In this study, the $2^{n-1}$ fractional factorial design method and correlation parameter were used to investigate the effect of the welding process variables on the fillet joint shape, and the multiple non-linear regression analysis was used for modeling the gas metal arc welding(GMAW）parameters of the fillet joint. Finally, a fuzzy rule-based method and a neural network method were proposed so that the complexity and non-linearity of arc welding phenomena could be effectively overcome. The performance of the proposed neuro-fuzzy system was evaluated through various experiments. The experimental results showed that the proposed neuro-fuzzy system could effectively check the welding conditions as to whether or not weld defects would occur, and also adjust the welding conditions to avoid these weld defects.

• Journal of Veterinary Clinics
• /
• v.35 no.4
• /
• pp.119-125
• /
• 2018

In vitro diagnostic veterinary medical reagents (IVDVMRs) were diverted the medical devices from medicine by the revision of the pharmaceutical affairs act enforcement regulations in 2015 in Korea. It classified into class I-IV according to risks of individual and public health. However, good manufacturing practices requirements on IVDVMRs were exempted from the current system. The registration of IVDVMRs by the Animal and Plant Quarantine Agency has gradually increased since 2012, and total of 584 products from 68 companies were registered from 1978 to 2017. Most of these items are clinical immunochemistry (infection disease), clinical immunochemistry (non-infection disease), molecular genetics, endocrinology, blood gas analysis, clinical microbiology, toxin, heavy metal and drug of abuse, other etc. The market size of IVDVMRs reported from the Korea Animal Health Products Association was estimated to be approximately 51.9 billion won in 2017. The domestic consumption and the export sales were approximately 31.2 and 20.7 billion won, respectively. They are increasing 23.9% (CAGR) in domestic consumption and 40.4% (CAGR) in export from 2011 to 2017.

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.551-559
• /
• 2010

Among the food constituents, proteins differ in coagulation properties as compared to other constituents in food system. Especially milk protein coagulate through different pathways thus this coagulability can be used for manufacture of various dairy products or as a determinant of dairy product analysis. These milk coagulation methods include organic solvent, isoelectric point, trichloroacetic acid, Ca-sensitive casein, heavy metal ion and rennet coagulation. The coagulation experiment was performed using above parameters at $0^{\circ}C$ and $25^{\circ}C$ to find the dehydration conditions before coagulating for precheese powder making. After different chemical treatments, there was no coagulation at $0^{\circ}C$ rather at $25^{\circ}C$ whatever the mode of coagulation methods was. The appearance of precipitate with coagulation methods was quite different from above mentioned methods of coagulation illustrated by scanning electron microscope. These powders were used for fabrication of camembert cheese by renneting coagulation at $0^{\circ}C$, showing the possibility of cheese materials and of food additives for fabrication of products.

• The Korean Journal of Ecology
• /
• v.25 no.6
• /
• pp.383-389
• /
• 2002

Pb and Cd concentrations and reproductive progress of feral pigeons were investigated in urban (Seoul) and industrial complex (Ansan) areas from November 2000 to May 2001. Results of the Pb analysis for the feral pigeons from the Ansan industrial complex (egg contents: 1.13 $\mu$g/wet g, bones of adult: 10.5 $\mu$g/wet g) and Seoul (1.64 $\mu$g/wet g, 29.5 $\mu$g/wet g, respectively) indicated that the Pb level of eggs and bones of adults were significantly different between the two colonies (p<0.05). Cd concentrations in liver and kidney of adult pigeons were also significantly different between the Ansan (liver: 0.14 $\mu\textrm{g}$/wet g, kidney: 0.43 $\mu$g/wet g) and Seoul (liver. 0.24 $\mu$g/wet g, kidney: 1.05 $\mu$g/wet g) colonies. (p<0.05). However, egg size and thickness, incubation period and nestling growth rates did not differ between the study areas. Also, clutch size, number of young hatched per nest and number of young fledglings per nest did not significantly different in the noted areas. Considering the lead and cadmium concentrations of pigeons, these were not as high as those considered as results in toxic effects in other species, and the biological significance from these level differences is uncertain.

• Journal of Radiation Protection and Research
• /
• v.25 no.2
• /
• pp.99-107
• /
• 2000

Through the results of off-gas analysis at 3 sampling points in Plasma Arc Melting vitrification pilot plant, it was evaluated the partitioning of spiked materials in off-gas and the decontamination characteristic of off-gas treatment system. Spiked materials are hazard_us heavy metals(Pb, Cd, Hg), radioactive surrogate(Co, Cs) and radioactive materials($^{60}Co,\;^{137}Cs$). Through the Trial burn tests, Decontamination factor of spiked materials in off-gas treatment system is calculated.

• Korean Management Science Review
• /
• v.32 no.2
• /
• pp.79-89
• /
• 2015

The firms with OHSAS (Occupational Health and Safety Management System) registration should be audited every six months and they have to be reregistered every three years by a third party. In our article audit data were collected from the audit processes of fifty four firms that OHSAS 18001:2007 was implemented and audited by LRQA (Lloyd's Register Quality Assurance). Fifty four firms are largely classified as four categories: civil engineering and construction industry, metal and heavy industry, chemical industry, and other industries including electric, electronic, food, and services. Especially the minor conformity data are analyzed by statistical methods to find out the relationship between four categories of 54 firms and the average number of minor nonconformities. The most frequently appeared minor nonconformities among sub-requirements of OHSAS 18001:2007 are investigated and the reasons for minor nonconformities are specifically explained. The average number of minor nonconformities of firms before and after OHSAS 18001:2007 registration are compared to understand the maturity of OHSAS implementation. Some comments and suggestions are provided for OHSAS to be effectively implemented to the firms if revision is necessary.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.89-96
• /
• 2009

In recent years, there has been a considerable interest in the application of super plastic forming in the aircraft and automotive industries. This requires a detailed design of the technological process in order to exploit its peculiar potentialities better. Nowadays, the finite element method is used to plan the sheet metal forming processes whose simulation requires determination of material constants for super plastic materials. The present work is aimed to show a simple method to characterize super plastic materials duplex stainless steel which was formed by a constant gaspressure to hemispheres with and without back pressure. The forming operation was performed using an in-house designed and built biaxial forming apparatus. The temporal change of dome heights of hemispheres were measured for applying the pressures. The flow stresses and strain rates developed at the top of the dome during the forming step were shown to follow closely the flow stress - strain rate relationship obtained from the strain rate change tests performed at the same temperature.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.595-604
• /
• 2014

SILER (Seismic-Initiated event risk mitigation in LEad-cooled Reactors) is a Collaborative Project, partially funded by the European Commission in the $7^{th}$ Framework Programme, aimed at studying the risk associated to seismic-initiated events in Generation IV Heavy Liquid Metal reactors, and developing adequate protection measures. The project started in October 2011, and will run for a duration of three years. The attention of SILER is focused on the evaluation of the effects of earthquakes, with particular regards to beyond-design seismic events, and to the identification of mitigation strategies, acting both on structures and components design. Special efforts are devoted to the development of seismic isolation devices and related interface components. Two reference designs, at the state of development available at the beginning of the project and coming from the $6^{th}$ Framework Programme, have been considered: ELSY (European Lead Fast Reactor) for the Lead Fast Reactors (LFR), and MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) for the Accelerator-Driven Systems (ADS). This paper describes the main activities and results obtained so far, paying particular attention to the development of seismic isolators, and the interface components which must be installed between the isolated reactor building and the non-isolated parts of the plant, such as the pipe expansion joints and the joint-cover of the seismic gap.

• Molecules and Cells
• /
• v.19 no.1
• /
• pp.81-87
• /
• 2005

Phytochelatins play an important role in heavy metal detoxification in plants as well as in other organisms. The Arabidopsis thaliana mutant cad1-3 does not produce detectable levels of phytochelatins in response to cadmium stress. The hypersensitivity of cad1-3 to cadmium stress is attributed to a mutation in the phytochelatin synthase 1 (AtPCS1) gene. However, A. thaliana also contains a functional phytochelatin synthase 2 (AtPCS2). In this study, we investigated why the cad1-3 mutant is hypersensitive to cadmium stress despite the presence of AtPCS2. Northern and Western blot analyses showed that expression of AtPCS2 is weak compared to AtPCS1 in both roots and shoots of transgenic Arabidopsis. The lower level of AtPCS2 expression was confirmed by RT-PCR analysis of wild type Arabidopsis. Moreover, no tissue-specific expression of AtPCS2 was observed. Even when AtPCS2 was under the control of the AtPCS1 promoter or of the cauliflower mosaic virus 35S promoter (CaMV 35S) it was not capable of fully complementing the cad1-3 mutant for cadmium resistance.