• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.46-62
• /
• 2010

This study was conducted to understand the water and soil properties to propose the promotion of vegetation environment at farm pond depression. We selected 8 palustrine wetlands from agricultural area after consideration of human interference, surround land use, and size of area. Water quality analysis showed that the average SS, T-N, T-P were over the limit of agricultural water quality standard level at some sites. The cause for deterioration of water quality is supposed by the long-term stagnation of water in palustrine wetland. The recommended measures to improve water quality are as follows; improving water circulation by connecting with nearby natural water, preventing oxygen depletion by dredging deposit, lowering down T-N and T-P by removing autumn plants, preventing inflow of phosphorus in fertilizer ingredients which is the main cause for high T-P. The soil contamination of the surveyed area was about the same level of average heavy metal contents in soils from 2,010 paddy fields in Korea, which was much lower than soil contamination standards. As for soil texture, sand content was 40~90% and clay content was less than 20%. The content of silt and clay in soil from community of floating-leaved:submerged hydrophytes and community of emergent hydrophytes was higher that of soil from community of hygrophytes, and the content of sand in soil from community of hygrophytes was 10% higher than underwater soil. In terms of bulk density, the average was 0.24~0.96g/$cm^3$, which was quite low, because of high content of peat and organic matter in soil of the surveyed area. As for the average content of organic matter, community of floating-leaved:submerged hydrophytes was 18.25g/kg, community of emergent hydrophytes was 16.88g/kg, and community of hydrophytes was 25.63g/kg. The range of content of T-N in soil of community of floating-leaved；submerged hydrophytes was 0.022~0.307%, and that of community of emergent hydrophytes was 0.029~0.681% and that of community of hydrophytes was 0.088~0.325%. Apart from three sites in the surveyed area, most parts were over the standards or below the standard. After this study, we will conduct and discuss the relationship between vegetation characteristics and environments, which will be used of the best practical management and restoration of wetland.

• The Journal of Korean Society for School & Community Health Education
• /
• v.12 no.3
• /
• pp.65-87
• /
• 2011

Objectives: The purpose of this study was to perform basic study on environmental and respiratory diseases in Ulsan and vicinities. Also, this study evaluated the actual state of environmental disease and health education at middle and high schools in Ulsan and surroundings. Methods: For this study, we conducted a survey on the health of the general public, environmental effects, and investigated the characteristics of environmental disease, health and hygiene education, etc. The populations of this study were middle and high school students in Ulsan, Korea. This study investigated the knowledge of environmental disease and health education at schools in Ulsan and vicinities from November 2009 to December 2009. All statistical calculations were performed with Statistical Package for Social Sciences (SPSS) for Windows, and gained the following results by implementing Frequency Analysis, Cross-tabulation Analysis and ANOVA. Results: As more and more environmental diseases are increased, the interest of the people has been increasing on this. The incidence rates of asthma and atopy were represented the top 25% of the country in Korea. The source of heavy metal, PAHs and VOCs in Ulsan includes the Petrochemical Complex at Nam-gu and Ulju-gun, the Nonferrous Metal Industrial Complex at Onsan-eup, Ulju-gun, and the Heavy Industrial Complex at Dong-gu and Buk-gu. Especially, there are a number of fossil fuel combustion facilities such as waste incineration plants and boilers at Nam-gu and the Onsan Industrial Complex. It may help greatly to investigate the characteristics of environmental pollutants such as environmental air pollutant and indoor contaminant to better manage the local student's health. Conclusions: It has been revealed that the hazardous chemicals and environmental contaminants are main substances of cause for asthma, atopy, dermatitis, and allergy disease. Therefore, through with collecting basic data such as environmental disease of inhabitants, health education, conscious and knowledgeable level in parents of students and students, We have to exert to improve knowledge and prevention with health life in school through development of health education program systematically for preventing of environmental disease.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.31-39
• /
• 2017

The fundamental study for an application of nanobubble as a soil remediation enhancer on heavy metal contaminated soil was carried out. The existence and long-term stability of hydrogen nanobubbles were investigated by particle analysis and zeta-potential analysis. And the removal efficiency of copper using nanobubble water(NBW) and distilled water(DW) were compared and analyzed through a batch desorption test. As a result, it is confirmed that nanobubble which was fabricated by compression-dissolution type generator can exist for more than 14 days. The results of batch test show that copper removal of NBW was higher than that of DW irrespectively to soil type and increased as solid-liquid ratio and contact time increased, respectively. According to the pH change, the removal of copper on sand was higher on the acid side but the removal difference was slightly lower on the clay. It is considered that a high efficiency of NBW in copper removal is due to the large surface area and high zeta-potential of nanobubbles. Therefore, the nanobubble can be applied to soil remediation for heavy-metal contaminated soil as an eco-friendly enhancer.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.4
• /
• pp.695-705
• /
• 2012

Objectives : The purpose of this study is to evaluate the appearance of having relationship between the exposure to lead and cadmium and the dental caries targeting adults in the Republic of Korea. Methods : The study was designed as a cross-sectional study, using the data of the Fourth Korea National Health and Nutrition Examination Survey. The subjects as 1,966 people, who were confirmed the appearance of dental caries among 1,991 people of having been offered the heavy-metal concentration in blood. Statistical analysis was conducted using SPSS 19.0, according to complex sampling design. Results : As a result of multi-variate analysis on factors of dental caries, in Model I without correction, the gender, age, educational level, appearance of lifelong smoking, daily toothbrushing frequency, appearance of using dental floss, and subjective oral health status were recognized as important factors. In Model II with correction of gender and age, the educational level, daily toothbrushing frequency, and subjective oral health status were recognized as statistically significant factors. In Model III with correction of all factors, the gender, age, educational level, appearance of using dental floss, and subjective oral health status were functioning as statistically significant factors. As a result of statistically analyzing relationship between the exposure to lead and cadmium and the dental caries targeting adults, it was analyzed that there is no significant correlation. However, in case of lead, the tendency of being grown the cross ratio of dental caries could be examined in model I, which didn't correct disturbance factor, model II, which corrected gender and age, and model III, which corrected all variables of disturbance factor. Conclusions : The exposure to lead and cadmium was indicated to have no relationship with adults' dental caries. However, a continuous research of relationship was considered to be necessary by using Korea National Health and Nutrition Examination Survey, which is surveyed in the future.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.119-132
• /
• 2012

The unmanaged abandoned concrete roads are vulnerable toward the issues on soil and water pollution, which requires flexible managing method such as eco-corridor after the process of ecological restoration. Among various alternations of abandoned concrete-paved roads, ecological restoration technique may be the most suitable method in sites including high quality of natural environment. Therefore, as in Young dong province, GyungBu express highway (227.24~229.04km), which is near to Hwang-gan IC, the survey to measure its effect of soil under the paving and water pollution by abandoned concrete roads was discussed. Then, the restoration method of plantings of landscape trees and hydro-seeding methods of artificial soil media was appraised through consecutive monitoring. The soil adequacy analysis shows lower percentage of heavy metal substance in each depth level compared to standard limit stated by the Ministry of Environment, along with low concerns raised after the analysis on heavy metal content of the spilled water on the concrete roads. Meanwhile, Korean Weigela (Weigela subsessilis L.H. Baily) was found to be withered in small-scale landscape trees planting sites. Among the seeding plants. the family of leguminosae, Silene armeria, Dendranthema boreale, Caryopteris incana and Aster yomena show good establishment results. Overall studies on planting of small and large landscape trees, planting method of container plants, planting method of ground cover plants, and germination and development trend of seeding plants of the experimental restoration site on abandoned concrete roads are revealing specific trends in the way landscape woody plants establishment and growth. Finally, this study suggests further studies and survey on varied plant restoration methods on abandoned concrete-roads for developed design guidelines of their methods.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.11a
• /
• pp.30-41
• /
• 2001

Rapid economic development and industrialization has been accompanied by an increase of energy demand and environmental pollution. The consumption of gasoline has increased totally, but decreased in use of leaded gasoline after 1988 in Korea. On the other hand, risk assessment of environmental pollutants requires reliable dose estimates. Source oriented monitoring is not providing adequate information to estimate human exposure. The Health Surveillance Project has been launched in Korea from 1980, which questioned their symptoms based on questionnaires and medical examinations for inhabitants in the vicinity of 13 industrial areas and 2 non-industrial areas. 10, 598 inhabitants living in these 15 areas had medical checkups and donated their blood f3r heavy metal analysis from 1980 to 2000 through this project. Especially lead levels in inhabitants' blood of these areas were determined and monitored. Totally 4, 967 samples in target areas were used to review the trend of blood lead level in this paper. Average lead concentrations by areas were from 15.2 to 21.0 ug/dl in 1981 and 22.3 to 34.3 ug/dl in 1988, but were 8.8 to 11.1 ug/dl in 1992 and 4.4 to 4.8 ug/dl in 1995. On the other hand, the consumption of leaded gasoline was at a peak in 1958. Blood lead level showed a very close relationship with the consumption of leaded gasoline in the change pattern(p<0.01) and showed a rapid declining trend since the use of unleaded gasoline, especially from 1988 when Seoul held the olympic games. For example, the blood lead levels were 15.2 ug/dl in 1981, 20.2 ug/dl in 1955. 24.3 ug/dl in 1988 and 3.9 ug/dl in 1993 in Yochon area. China also had monitored blood lead levels of general population. 7, 015 inhabitants living in 28 areas donated their blood far heavy metal analysis from 1981 to 1988. Average lead concentrations by areas were from 5.1 to 5.6 ug/dl before. 1984 but were form 2.8 to 11.2 ug/dl after 1984. Average lead concentration in blood showed increasing trends clearly in most of the areas. The recent policy of unleaded gasoline use for automobile will be a very beneficial policy for the management of atmospheric lead pollution & health risk assessment for the general population in China. It is recommended that it should be propelled more widely and rapidly to the entire country.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.4
• /
• pp.9-16
• /
• 2023

In this study, the status and characteristics of fine dust and its impact on neighboring areas were investigated to proactively respond to the government's environmental regulations expected in the future and to minimize the damage by the fine dust generated at construction waste intermediate treatment plants. In addition, since there are no such plants that can affect the surroundings with no houses or other waste treatment sites nearby, an independently located construction waste intermediate treatment plant was selected to compare the characteristics of fine dust with that from the construction waste intermediate treatment sites located in the downtown area. The conclusions of the study are as follows. (1) The measurement results of PM10 at 4 points in the plant showed that the location where the crushing facility was operating had an elevated level of fine dust at 80㎍/m³ on average and a maximum of 124㎍/m³, and the level rose to 110㎍/m³ at points where vehicles frequent. (2) The PM2.5 measurement results inside the plant showed that the average concentration of the reference point was 16㎍/m³ and the maximum value was 20㎍/m³, which was distributed within the management standard. (3) It was found that the average concentration of PM10 in the nearby area ranged from 28 to 38㎍/m³, which was similar to or lower than 36㎍/m³ of the reference point. Therefore, the concentration of the fine dust generated in the plant had a negligible effect on the increase in concentration of fine dust in nearby areas. (4) The heavy metal contents were measured from the filter paper collected from the plant. The PM10 was found to be about 14 to 26ng/m³, and PM 2.5 was 25 to 28ng/m³, which was the average of domestic atmospheric concentrations. (5) The SEM-EDX analysis results showed that the PM10 contained Si and O around 40% similarly for both. The SiO2, a component of silica occupied the most and C was present as CaCO3, which was assumed to be a limestone component. The remaining components included NaO, Al2O3, and CaO as trace oxides. (6) The SEM-EDX analysis results showed that the PM 2.5 contained 5 to 7% of Cl, which is a chlorine ion, and a small amount of K was detected at 2.51% in the sample from the shutdown plant.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.434-440
• /
• 2011

In order to establish the guidance of management and safe use hazard substance, trend analysis of hazard substance in/on agricultural products reported by press for 5 years (2005-2009) was performed. Data for the analysis collected from the articles about hazard substances from web portals, newspapers and so on. The mostly detected harmful factors in/on agricultural products were pesticides residue and heavy metals by the reports by press for last 5 years. The number of detected pesticides was slightly increased from 14 to 34 through the passage of time but the number of cases reported by press was not increased. On the other hand, the number of accidents and reports related to heavy metals were highly increased from 3 to 13 and 42 to 112, respectively. 65 pesticides including chlorpyrifos were detected in domestic agricultural products for the 5 years. Frequently detected pesticides were chlorpyrifos, endosulfan, carbendazim, azoxystrobin, and procymidone. Pesticide residues were repeatedly detected on green vegetables such as a green perilla leaf, a lettuce, a leek, and spinach among crops.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2022

Heavy metals can be intentionally or unintentionally introduced into plastic food utensils, containers, and packaging (PFUCP) as additives or contaminants, which can be ingested with food by humans. Here, seven-heavy metals (lead, cadmium, nickel, chromium, antimony, copper, and manganese) with toxicity concerns were selected, and risk assessment was done by establishing their migration from 137 PFUCP products made of 16 materials distributed in Korea. Migration of heavy metals was examined by applying 4% acetic acid as a food simulant (70℃, 30 minutes) to the PFUCP products. Inductively coupled plasma mass spectrometry (ICP-MS) was employed for the analysis of migrated heavy metals, and the reliability of quantitative results was confirmed by checking linearity, LOD, LOQ, recovery, precision, and expanded uncertainty. As a result of monitoring, heavy metals were detected at a level of non-detection to 8.76 ± 11.87 ㎍/L and most of the heavy metals investigated were only detected at trace amounts of less than 1 ㎍/L on average. However, antimony migrated from PET products was significantly higher than other groups. Risk assessment revealed that all the heavy metals investigated were safe with a margin of exposure above 311. Collectively, we demonstrated that heavy metals migrated from PFUCP products distributed in Korea appear to be within the safe range.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.63-69
• /
• 1997

Welding distortion is more serious problem than any other problems caused by welding process, especially, in the heavy-industrial place. These welding distortions are caused by nonuniform heating and cooling of metal during and after welding operations. And these distortion quantities are must be known to worker in production line because distorions are important role in assembling part. Therefore an analytical model to explain and predict the welding distortion are needed. A numerical analysis of welding distortion which is inelastic behavior of weldment would require the three dimensional calculation. But computing time and memory would be very large, and the resulting cost might be unacceptable. Therefore we use a numerical technique for two dimensional analysis in the section normal to the weld direction of weldment under an assumption of quasi-stationary conditions. But the result of the calculation under two dimensional(plane strain) assumption was not satisfied as compared with experimental result. This paper proposed a technique for analysing the welding angular distortion by using a constraint boundary condition on the two dimensional finite element model. The simulation results revealed that the constraint boundary model could more reasonably describe the welding distortion than the plane strain model did.