• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.197-204
• /
• 1999

The extent of heavy metal pollution in agricultural in soils near the abandoned mine land site was investigated using their concentrations from the 47 sampling sites in B mine. Samples were prepared using 0.1N HCI - Korean Standard Methods - and then analysed for Cd, Cu, Pb, As and Cr by Inductively Coupled Plasma Spectrometer. In addition, soil and mine tailing samples were sequentially extracted to investigate the chemical speciation of heavy metals in them. The soils in the vicinity of mining area are highly contaminated by heavy metals ranging up to 5.96mg Cd/kg, 253.3mg Cu/kg, 76.7mg Pb/kg, and 15.45 mg As/kg, according to the analysis of Korean Standard Methods. The heavy metal levels by the sequential extraction are much higher than its level by Korean Standard Methods, and little correlated with each other. Based on the results, it is suggested that the As pollution in agricultural soils near the AMLS should be dealt as of prior significance in establishing reclamation strategies for the area.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.3
• /
• pp.241-250
• /
• 1994

This research was carried out to investigate how the growth of corn was affected by the heavy metal contents in soils near the old zinc-mining sites, by analyzing correlation between the growth of corn and heavy metal contents in soils collected from Yonghari Ilwoulmyun YongyangGun in Kyeongpook province in 1993. The results obtained were summarized as follows. 1. The contents of heavy metals such as Zn, Cu, Pb, Cd, and as in the Youngyang area were very high compared with those in a normal area. Heavy metal contents in soils collected from $2.0{\sim}2.5Km$ distance from the mining area were the highest, and those from 3.0 Km than those from 1.5 Km were even higher. 2. For heavy metal contents in leaves of all surveyed crops, Zn, Pb, Cu and As were the highest in soybean, followed by corn and rice. 3. Growth parameters of corn in polluted fields were comparatively poor and heavy metal contents in soils of the respective sites were higher than those in fields where rice was cultivated 8 years ago and irrigation was not done previously. 4. Heavy metal contents in the leaf part of corn plant showed a similar tendency to those in soils, being the highest among the different parts of corn plant, and they were in the decreasing order of Zn > Cu > As > Cd > Pb in each part. But the differences of metal contents in each part varied. 5. Generally, a negative relationship existed between the growth of corn and heavy metal contents in soil, of which Cu and Pb were significantly correlated with plant height, ear height, diameter of stem, ear length and yield of corn. 6. There existed a positive correlation between the contents of Pb,Cd and As in soils and those in the different parts of corn plant. The higher contents of Pb, Cd, and As in soil, the more those in corn plant incressed. The contents of Pb and As in corn grains showed a highly significant positive correlation with Cd and As contents in soils.

• Journal of Environmental Impact Assessment
• /
• v.29 no.4
• /
• pp.252-271
• /
• 2020

In this study, we investigated physical and chemical properties such as grain size, heavy metal pollution, magnetic properties, and their environmental impacts of road dusts (RD) collected from 14 sampling points in Daebul industrial Complex. Heavy metal concentrations in RD were in the order of Fe>Zn>Cu>Pb>Cr>Ni>As>Cd>Hg, and this pollution pattern was related to major industries and traffic activities in this area. The results of the correlation analysis between heavy metal elements and particle size in RD showed that Fe and all of analyzed heavy metals had a significant correlation with each other and metal concentrations had a significantly negative correlation (p<0.05). However, due to the input of large metal particles some heavy metal concentrations in the particle fraction of >1000 ㎛ were highest. Pollution load per unit area of this fraction was the highest among the grain size fractions. Cr, Ni, Cu, Zn, Cd, Pb levels in RD decreased and the levels of Cr, Ni, Cu, Zn, Cd, and Pb were reduced to 85 (As) -22 (Ni)% of the whole after removal of MFs fraction from RD. The mean heavy metal levels in the study area did not exceed the soil contamination guide value of Korea, indicating that heavy metal levels in RD were not a concern. However, at some sampling points, Zn concentrations were exceeded the soil contamination guide value for the 3rd areas of Korea and this result indicated that further studies of the impact of RD on the surrounding environment through re-suspension or non-point pollution, and of effective management methods are required.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.898-901
• /
• 2001

This study was carried out to research on the heavy metal contents of domestic and imported medicinal herbs. The heavy metals contents in 116 samples of 51 types of medicinal herbs were measured by using a modified Monier-Williams, mercury analyzer and inductively coupled plasma spectrometer(ICP). The heavy metal contents of medicinal herbs were as follows; Hg: 0.010(domestic: 0.010, imported: 0.010), Pb: 0.380(0.311, 0.449), Cd: 0.080(0.101, 0.059), As: 2.085(1.845, 2.324), Mn: 31.564(33.844, 29.283), Zn: 15.436(18.703, 12.168), Cu: 3.406(3.374, 3.437), Fe: 134.944(108.327, 161.561) by ppm unit. The measured values of Pb and Cd of domestic and imported medicinal herbs showed lower levels than the recommended levels of those in medicinal herbs by WHO/PHARM (Pb: not more than 10 ppm, Cd: not more than 0.3 ppm). Finally, this results will be used as a basic data for the future legislation on the regulation and control of heavy metal contents of medicinal herbs.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.6-8
• /
• 2005

The forest soils of 92 sites in Korea were analyzed to survey heavy metal background levels using aqua regia digestion method and 0.1N HCl extraction method. From these results, the average natural contents of heavy metals were Cd 0.287, Cu 15.26, Pb 18.43, Cr 25.36, Zn 54.27, Ni 17.68mg/kg for aqua regia method, and Cd 0.040, Cu 0.48, Pb 3.06, Cr 0.09, Zn 1.54, Ni 0.27mg/kg for 0.1N HCl extraction method. The range of correlation coefficients between heavy metal contents obtained from two methods(aqua regia and 0.1N HCl) was significant as $0.24{\sim}0.88$, and the correlation coefficients were decreased in order of Cd, Pb, Cu, Ni, Cr, Zn.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.1
• /
• pp.8-15
• /
• 2013

Little research has been conducted to explore the heavy metal removal potential of biochar. The adsorption characteristics of heavy metals by sesame waste biochar (pyrolysis at $600^{\circ}C$ for 1 hour) as heavy metal absorbent were investigated. The sesame waste biochar was characterized by SEM-EDS and FT-IR, and heavy metal removal was studied using Freundlich and Langmuir equations. The removal rates of heavy metals were higher in the order of Pb>Cu>Cd>Zn, showing that the adsorption efficiency of Pb was higher than those of any other heavy metals. Freundlich and Langmuir adsorption isotherms were used to model the equilibrium adsorption data obtained for adsorption of heavy metals on biochar produced from sesame waste. Pb, Cu, Cd and Zn equilibrium adsorption data were fitted well to the two models, but Pb gave a better fit to Langmuir model. Heavy metals were observed on the biochar surface after adsorption by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Main functional groups were aromatic C=O ring (at $1160cm^{-1}$, $1384cm^{-1}$ and $1621cm^{-1}$) by FT-IR analysis. Thus, biochar produced from sesame waste could be useful adsorbent for treating heavy metal wastewaters.

• Journal of Environmental Science International
• /
• v.16 no.11
• /
• pp.1225-1230
• /
• 2007

The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.803-809
• /
• 1998

Heavy metal ions in water were removed using algal biomass as adsorbents. Absorbents were dried for 3 days, ground them by 40~60 mesh and then were swelled in a buffer solution for 1hr. After being packed in the column, commercially available standard solution of Cd(II) and Pb(II) ions were diluted to get the suitable concentration and then it was eluted with the rate of 1mι/min. Heavy metals on the adsorbents were recovered with nitric acid. More amounts of Cd(II) or Pb(II) ions in green algae, Ulva pertusa, than in brown algae, Sargassum horneri, were adsorbed. Pb(II) ion was adsorbed more than Cd(II) ion in both algae. The pH effect of adsorbed amounts of Cd(II), Pb(II) ions on the biomass was shown the following order ; pH 10.5 ＞ 8.5 ＞ 7.0 ＞ 5.5 ＞ 3.5. Recovery ratio of metal ions front algae is shown higher in acidic or neutral conditions than it in alkalic ones. Pb(II) ion is recovered relatively more than Cd(II) ion in our system.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.167-175
• /
• 1992

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-Pl zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-Pl exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for Pb2+ ion. The metal ion selectivity of Na-Pl was determined in a decreasing order : $Pb^{2+}$>$Cd^{2+}$>$Cu^{2+}$+>$Zn^{2+}$>$Fe^{3+}$

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.2
• /
• pp.167-175
• /
• 1997

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-P1 zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-P1 exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for $Pb^{2+}$ ion. The metal ion selectivity of Na-P1 was determined in a decreasing order : $Pb^{2+}>Cd^{2+}>Cu^{2+}>Zn^{2+}>Fe^{3+}$.