• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.435-444
• /
• 2009

In situ stabilization of heavy metals through adsorption onto indigenous bacterial biofilm developed on soil particles was investigated. Biofilms were developed in soil columns by supply of various carbon sources such as acetate, lactate and glucose. During development of biofilms, acetate, lactate, and glucose solutions were flew out from the soil columns with volume ratios of 98.5%, 97.3%, and 94.7%, respectively, when compared with soil column supplied with deionized water. Decrease in effluent amounts through the soil columns amended with carbon sources over time indicated the formation of biofilms resulting in decrease of soil porosity. Solutions of Cd, Cr(VI), Cu, Pb, and Zn were injected into the biofilms supported on soil particles in the columns, and the dissolved heavy metals in effluents were determined. Concentrations of dissolved Cd, Cr(VI), Cu, and Zn in the effluents through biofilm columns were lower than those of control column supplied with deionized water. The result was likely due to enhanced adsorption of the metals onto biofilms. Efficiency of metal removal by biofilms depended on the type of carbon sources supplied. The enhanced removal of dissolved heavy metals by bacterial biofilms in this study may be effectively applied to technical development of in situ stabilization of heavy metals in natural soil formation contaminated with heavy metals.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.694-700
• /
• 2018

To investigate the effect of heavy metals (Cu, Cd, Hg, Pb, Zn) on mosquito Culex pipiens, 50% lethal concentration ($LC_{50}$) concentration, total lipid content, lipid content composition, and total protein content were measured. The results showed that the Hg $LC_{50}$ was $0.45mg\;kg^{-1}$ and the Hg toxicity was higher than the other metals. The results also showed that cadmium (Cd) significantly retarded the growth of mosquito larvae among the tested heavy metals. Six types of lipid bands were isolated from mosquito samples exposed to heavy metals, and five of them were identified (phospholipid, cholesterol, fatty acid, triglyceride, and cholesterol ester). The total lipid content of all treatments decreased compared to the control. In addition, the protein content of the control group ($0.51mg\;ind.^{-1}$) was higher than that of the treated group, and the protein content of the larvae treated with Hg and Cd was very low. In conclusion, heavy metals not only lower the survival rate of mosquitoes, but also affect the protein content and lipids in the mosquito's body, thereby causing growth inhibition. These results indicate that heavy metal contamination will affect the size of mosquito population by inhibiting the survival and growth of mosquitoes, and it is expected that it can be used to measure the degree of contamination using mosquito through subsequent studies.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.577-582
• /
• 2019

Objectives: The purpose of this survey was to assess the concentrations of heavy metals in the atmosphere of Pocheon City by measuring heavy metals in the industrial complex area and at the city air measuring station, and also to assess the degree of impact that the industrial area has on urban air quality. Methods: Sampling was carried out between February 2018 and November 2018 at two sites in the industrial complex and in the city air monitoring stations. Results: At the industrial complex in Pocheon City, air pollutant emitting businesses were emitting concentrations of fine dust (PM₁₀) between 45 and 60 ㎍/㎥ higher than in the city air. The daily maximum concentrations of lead (Pb), manganese (Mn), and cadmium (Cd) in the industrial complex are below the WHO recommendation standard (annual average), and the impact on the urban atmosphere is judged to be insignificant. Three to five percent of fine dust (PM₁₀) consists of metallic materials, and as the fine dust increased, metals were detected proportionally. Although cadmium (Cd) and beryllium (Be) were not detected in the city air in Pocheon and chromium (Cr), copper (Cu), and arsenic (As) were found to be 50 percent or less, it is deemed that copper (Cu) was detected at unusually high levels due to unknown air pollutants, which requires regular heavy metal measurement and cause verification. Conclusions: An analysis of the heavy metals in the industrial zone and the urban atmosphere in Pocheon City in this study showed that the linear relationship of heavy metals in the industrial zone, or the direct impact relationship, on the heavy metals in the urban atmosphere could not be estimated. The sampling device for equivalent assessment of particulate matter installed at air pollution monitoring stations is highly likely to be used for analysis of fine dust and heavy metals.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.212-220
• /
• 2015

This study aims to identify the characteristics of phthalates (DMP, DEP, DBP, DEHA, BBP, DEHP, and DNOP) and heavy metals such as lead (Pb), cadmium (Cd), and mercury (Hg) in cosmetics and their containers. Phthalates and heavy metals may be endocrine distruptors. Sixty-five cosmetics were purchased from online and offline stores in Busan. This study developed a simultaneous method for the analysis of phthalates by GC-FID. The results showed that among the 65 cosmetics, DBP, DEHP, and DEP were detected at 20.0%, 7.7%, 1.5%, respectively. The amounts of DBP and DEHP detected in 18 samples were less than 100 μg/g, which satisfies the Regulations of Cosmetic Safety Standards in Korea. In order to detect phthalates in cosmetic containers, a dissolution test was conducted by extracting solutions, such as water, n-heptane, 20% ethanol, 50% ethanol and 4% acetic acid, which were prepared with different levels of pH, alcohol content, and fat content following the Korea Standards and Specifications for Utensils, Containers, and Packaging. The results showed that DMP, DBP, DEHA, BBP, DEHP, and DNOP were not detected, DEP was detected in plastics such as PE, PP, and others, when a 50% alcohol solvent was used. Phthalates may not be detected in cosmetic containers if they are not packaged with the above 20% alcohol constituent. We also analyzed the concentration of heavy metals, such as Pb, Cd, and Hg, by using ICP-OES and a mercury analyzer. The ranges of concentration were ND~2.71 μg/g for Pb, ND~0.31 μg/g for Cd, and ND~0.01 μg/g for Hg, which are below the regulated level.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.56-66
• /
• 2016

Generally, the contribution of crop-intake pathway (CIP) is remarkable in human health assessment (HHA) of heavy metal contamination. Although the crop exposure concentrations (Cp) should directly be used for calculating the average daily dose (ADD) of CIP, the soil exposure concentration (Cs) multiplied by soil-crop bio-concentration factor (BCF) has frequently been used instead of using Cp values. Thus, the BCF values are significant in the HHA, and care should be taken to ensure the reasonable acquisition of BCF values. Meanwhile, the BCF values are known to be significantly affected by analytical methods. Nevertheless, they have been calculated from the concentrations of soil and crop analyzed by only one method: total digestion (aqua regia extraction). For this reason, this study was initiated to seek appropriate soil analysis methods for effective computation of the ADD of CIP. The concentrations of 5 metal contaminants (As, Cd, Cu, Pb, and Zn) in 127 soil samples obtained from 4 abandoned metal mine areas were analyzed by several methods including total digestion and partial digestions using 0.1/1 N HCl, 1M $NH_4NO_3$, 0.1 M $NaNO_3$, and 0.01M $CaCl_2$. The heavy metal concentrations in 127 crop samples (rice grains) were analyzed by total digestion as well. Using the concentrations of soils and crops, the BCF values of each contaminant were calculated according to the kind of soil extraction methods applied. Finally, the errors between Cp and $C_s{\times}BCF$ were computed to evaluate the relevance of each method. The results indicate that the partial extraction using 0.1 N and 1 N HCl was superior or equivalent to total digestion. In addition, the 0.1M $NaNO_3$ method combined with total digestion is recommended for improving the reliability of BCF values.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.41-50
• /
• 2001

The use of clay has been the favored method of reducing or eliminating hazardous contaminants in the leachate from landfills. But, neither natural clays nor organoclays modified with surfactants are able to effectively sorb both heavy metals and organic contaminants. Therefore, the objective of this study is to determine the optimal amount of surfactant added on the clay mineral to effectively remove both of them. For this purpose, Na-Bentonite as the natural clay, and hexadecyltrimethylammonium (HDTMA) as the cationic surfactant were used, Chlorobenzene and lead ($Pb^{2-}$) were selected as representative contaminants. Experimental result showed that chlorobenzene sorption increased with increasing HDTMA to bentonite, ratios. On the contrary, the removal rate of lead decreased as the amount of HDTMA increased. The removal of chlorobenzene was influenced by the amount of HDTMA added to the bentonites rather than initial concentration of chlorobenzene, but the removal of lead was much more influenced by the initial concentration of lead. The adsorption of lead was not affected by chlorobenzene, and vice versa. The competitive sorption between the heavy metal and the organic contaminant was not present.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.401-409
• /
• 2009

The results of particulate matters level and heavy metal concentration, which surveyed in Gwang-Yang, Dang-Jin steel industry area, are as follows; The $PM_{2.5}$, $PM_{10}$ of exposure area are $22.3{\mu}g/m^3$, $40.4{\mu}g/m^3$ each in Kum-Ho dong, and $28.1{\mu}g/m^3$, 51.5 each in Jung dong. The $PM_{2.5}$, $PM_{10}$ of control area are $16.4{\mu}g/m^3$, $29.5{\mu}g/m^3$ each in Bonggang-myeon. The level is higher in exposure area than control area. In case of Dang Jin, the concentration of $PM_{10}$ and $PM_{2.5}$ is higher in exposure area than control area ($PM_{2.5}-20.4{\mu}g/m^3$, $PM_{10}-39.2{\mu}g/m^3$). The Pb level of Dang Jin area is higher in exposure area ($0.13{\mu}g/m^3$) than control area ($0.1{\mu}g/m^3$) and both Gwang-Yang and Dang-Jin area lower level than the Guideline level of Korea EPA.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.141-149
• /
• 2009

Objective of this study was to characterize the particle size distribution(PSD) and quantify the pollutant concentration in highway runoff. Runoff samples during two rainfall events at four road sites in Gyunggi-Do were collected and PSD and associated pollutant distribution was quantified. Also, rainfall amount, flow rate, and other pollutants in samples were analyzed. PSDs in each sample were analyzed and compared with temporal trends of other pollutants. High partial event mean concentrations(PEMC) of particulates were observed at the beginning of runoff and rapid decrease thereafter. Other pollution parameters such as turbidity, TSS, BOD, TN, and TP also have similar temporal runoff trend with the PEMC. Especially PEMC was well correlated with total suspended solids(TSS) and turbidity. Cu, Pb, Zn had high concentration both runoff and sediment. Heavy metals in sediment were strongly bound to fine particles that have the large surface area-to-volume ratios.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.6
• /
• pp.539-546
• /
• 2002

The physicochemical properties of solid wastes generated from seven highway service areas, four branch offices, and one construction site were analyzed in concert with air pollutants including heavy metals emitted from near-by small-scale incinerators. The amount of solid wastes generated from highway areas has been increasing with recent increases in the number of highways and passengers. Twelve incinerators examined in this study generally had capacity smaller than 100 kg/hr, most of which were equipped with cyclone for dust removal. It was seen that the concentrations of the gas-phase air pollutants (e.g., SO$_2$, NO$_{x}$, HCl and H$_2$S) were above the acceptable emission standards except one or two sites. CO concentrations at all incinerators were also higher due to incomplete combustion. In addition, particulate matters showed concentration six times higher at their maximum. The results of heavy metal analysis showed that the concentrations of Cu, Cd, and Ni satisfied the emission standards. whereas Pb at one site and Zn at five sites exceeded the standards. Cr measurement results indicated that 9 of 12 incinerators had higher values than the standard; especially one branch office showed nine times higher than normal concentration. In order to satisfy more stringent emission standards in the near future, it is necessary to install air pollution control system and to develop an intensified management plan.n.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.393-400
• /
• 2017

This study was investigated on pH, heavy metals, oils and solvents in 34 surface soil samples and the samples are collected at two times for 17 farmland sites around 7 industrial areas in Northern Gyeonggi Province. As a result of pH for soil contamination monitoring network, the range of pH showed 4.4~8.4 and average was 6.3. The range of pH for Agricultural land around industrial area was 6.7~7.5 and average indicated 7.1 that mostly showed neutral condition in this area. he average concentrations of Cu, Pb, Ni, As and $Cr^{6+}$ are lower than Korea soil contamination worrisome levels at region 1 and the mean levels of farmland from the soil quality monitoring network. The average concentrations of Zn, Cd and Hg didn't exceed the soil contamination worrisome levels at region 1 but slightly higher than the mean levels of farmland from the soil quality monitoring network. The heavy metal levels of all samples are within Korea soil contamination worrisome levels at region 1. The results showed that the detected heavy metal concentrations ranged from N.D. to ~32.7% of Korea soil contamination worrisome levels at region 1. BTEX, TPH, TCE and PCE were not detected in all samples and thus the farmland around the industrial areas were free from oils and solvents contamination.