• Particle and aerosol research
• /
• v.17 no.4
• /
• pp.133-148
• /
• 2021

This study aims to estimate the amount of air pollutants emitted from heavy industry facilities in North Korea. To compare the emission in 2017 from the heavy industry sector in North Korea with South Korea, the heavy industry sector was classified with the South Korean classification (Matching Heavy Industry sector) and air pollutant emissions by Matching Heavy Industry sector in North Korea were estimated. The CO, NO_x and SO_x emissions of Matching Heavy Industry sector in North Korea are 22%, 73%, and 31% of the emission in South Korea, respectively. The air pollutant emissions in the Matching Heavy Industry sector in North Korea for CO, NO_x and SO_x were 0.6%, 124%, and 24% of the total air pollutant emission in North Korea estimated from EDGAR, respectively. As for the distribution of emissions by administrative district of the Matching Heavy Industry sector in North Korea, NO_x was concentrated in the western part of North Korea, and CO and SO_x emissions were concentrated in Hamgyong-bukto.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1385-1390
• /
• 2010

Repeated additions of untreated slurry to soil affected ecology and caused high levels of heavy metal in soil and ground water. The objective of this study was to evaluate heavy metal from hanwoo slurry with ferrous sulfate ($FeSO_4{\cdot}7H_2O$), aluminum sulfate [$Al_2(SO_4)_3{\cdot}14H_2O$, alum] and aluminum chloride ($AlCl_3{\cdot}6H_2O$) as a way to improve environmental management in hanwoo industry. The treatment rates, which were incorporated totally within the hanwoo slurry, were 1.0 g and 1.5 g of ferrous sulfate, alum and aluminum chloride/25 g of hanwoo slurry. The various rates of chemical additives significantly increased dry matter (9.98~13.94%) and decreased pH (3.48~6.52) compared with the controls. The use of chemical additives decreased Fe (11~29%), Al (7~12%), Zn (13~36%), and Cu (4~32%) contents, except for Fe in hanwoo slurry with ferrous sulfate and Al in hanwoo slurry with alum and aluminum chloride. In addition, the reduction in heavy metal should be associated with reduction in pH. In conclusion, the results of this study suggest that alum and aluminum chloride additives at rate of 1.5 g were cost-effective management practice that significantly reduces heavy metal from hanwoo slurry, while it may be improved environmental management.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.4
• /
• pp.431-436
• /
• 2022

For the safety assessment of microbiological and chemical hazards in katsuobushi, fifteen samples of katsuobushi were purchased from supermarkets. The contamination levels of total viable bacteria, coliforms, Escherichia coli, and nine pathogenic bacteria [Staphylococcus aureus, Salmonella spp., Listeria monocytogenes, Bacillus cereus, Vibrio parahaemolyticus, Clostridium perfringens, Enterohemorrhagic E. coli (EHEC), Yersinia enterocolitica and Campylobacter jejuni/coli] were quantitatively or qualitatively assessed. Additionally, the heavy metals (total and methyl mercury) content, radioactivity (¹³¹ I, ¹³⁴ Cs⁺ and ¹³⁷ Cs) were quantitatively assessed. Microbial and chemical analyses were performed using standard methods in Korean food code. The contamination level of total viable bacteria was 2.70 (1.18-4.42) log CFU/g. Coliforms, E. coli and S. aureus were not detected in any samples. Other eight pathogenic bacteria were negative in all samples. The contamination levels of total and methyl mercury were 0.366 (0.227-0.481) and 0.120 (0.002-0.241) mg/kg, respectively. In addition, radioactivity was not detected in any samples. The results will be helpful in revitalizing domestic use and boosting exports of katsuobushi because the microbiological and chemical safety of katsuobushi has been assured. Furthermore, the results may be used as a basis for performing chemical and microbial risk assessments of katsuobushi.

• Corrosion Science and Technology
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2007

Several heavy duty coatings at an every kind industry facilities to various systems currently have been applied review to the many industry fields. Corrosion-protective characteristics in the case of novolac epoxy among them and unsaturated polyester have been applied most widely. epoxy and flake heavy duty coatings are applied for such reason in an every kind facilities(stack, FGD, cooler, chemical tank etc) of a fossil-fuel power plants Cases of the fossil-fuel power plants are exposed to more severe corrosion environment compared with other facilities and It is difficult to display the performance of long-term method at apply to be the partial. Our study shows fluoro-polymer composite coating method to overcome of the limit. The comparison did previous method and heavy duty coating about FGD plants most at a corrosion environment among fossil-fuel power plants. Additionally, other facilities examined different heavy duty method. The design mode of fluoro-polymer composite coating according to an every kind facilities show extensive methods that are characteristic revelation of film(top, middle and primer layer) composition of the paint, film thickness in accordance with a facilities corrosion and the corrosion protective effectiveness to come into being use fluoro-polymer composite with heavy duty paint(epoxy).

• Bulletin of the Korean Chemical Society
• /
• v.24 no.10
• /
• pp.1433-1436
• /
• 2003

A new method for the simultaneous determination of heavy metal ions in cigarette material by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) has been developed. The cigarette material was digested by microwave digestion. Lead, cadmium, mercury, nickel and tin ions in the digested samples were pre-column derivatized with tetra-(2-chlorophenyl)-porphyrin ($T_2$-CPP) to form color chelates, which were then enriched by solid phase extraction with a $C_{18}$ cartridge. The chelates were separated on a Waters Xterra$^{TM}RP_{18}$ column by gradient elution with methanol (containing 0.05 mol/L pyrrolidine-aceticacid buffer salt, pH = 10.0) and acetone (containin0.05 mol/L pyrrolidine-acetic acid buffer salt, pH = 10.0)as mobile phase at a flow rate of 0.5mL/min and analyzed with a photodiode array detector from 350-600 nm. The detection limits of lead, cadmium, mercury, nickel and tin were 4,3,3,8 and 5 ng/L, respectively, in the original samples. This method was afforded good results.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.2
• /
• pp.111-117
• /
• 2013

Heavy oil fly ash (HOFA) is a byproduct generated by the burning of heavy fuel oil. Chemical analysis showed that HOFA is mainly composed of unburned carbon with a significant amount of heavy metals. Due to toxicity, management of this waste poses a challenge to the industry personal. The present study investigates the possible use of HOFA as a black pigment or admixture in cement mortar aiming to produce ornamental brick. In order to investigate the change of cement mortar strength when HOFA is added, the standard compressive strength test with 50 mm cubes was performed. The results showed that the addition of 2-5 % of HOFA in cement mortar does not affect its strength. The leaching behavior of trace elements within HOFA and HOFA mixed mortar were investigated through laboratory batch leaching experiments. The results confirmed that HOFA can be utilized as a black pigment in ornamental brick, which is environmentally safe and provides good balance between color and brick properties.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.109-116
• /
• 2007

As conventional light oil resources deplete, it is becoming necessary to develop unconventional resources. To meet the demand for petrochemical industry, heavier sources such as heavy oil and bitumen are being utilized. Bitumens, a complex hydrocarbon made up of a long chain of molecules, are found in oil sand. It is estimated that 830 billion barrels of oil are located in the oil sand in Alberta, Canada. This paper will review briefly (1) the basic concept of oil sand, bitumen, and heavy oil, (2) methods how to extract oil from oil sand, (3) methods how to upgrade to synthetic crude oil, and (4) economic evaluation of technology.

• Journal of Industrial Convergence
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2016

The Korean shipbuilding industry, which started in the 1970s with the advance of three shipbuilding companies, has been ranked as the world's largest and most successful model of the heavy and heavy chemical industry in the world since the 1990s, and has become a driving force for Korea's economic growth for several decades, including job creation and trade surplus. The domestic shipbuilding industry has won a lot of orders in favorable market environment, expanded facilities and manpower, built many ships and delivered them to shipowners, earning a lot of foreign currency and creating a 'successful myth.' However, when the global economic crisis broke out in 2008, shipbuilding in Chosun was stagnant and shipbuilding orders sharply decreased.As the facility and manpower increased in the boom period, the economy and the facilities become overcrowded as a result of the crisis, signs of a crisis in 2013 begin to appear. In 2015, three major Korean shipbuilders lost more than 6 trillion won in operating losses. Now, Korea's shipbuilding industry is facing a crisis such as massive insolvency and restructuring. Would not it have been possible to prevent the loss and restructuring of a trillion won if we recognized the recession of the global economy and understood the appropriate timing of technological innovation and prepared countermeasures against the crisis? Therefore, we analyze trends and trends of global shipbuilding industry such as Europe, China, and Japan in the competition structure of the shipbuilding industry and identify the problems of our shipbuilding industry and suggest suggestions.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.4
• /
• pp.323-330
• /
• 2006

As the interest in environmental pollution resulting from recent industrial development is converging, wastewater treatment problem of dying processing is one of important pending issue. Usually, flow mediation earth and settling pond etc. of processing plant to handle water or wastewater. Mediation is the wastewater that flowed past settling pond than material of heavy particles, water weight colloid particles that big solids are removed but are suspensibility material settlement exclusion impossible. So, we need flocculation and coagulation action to remove materials from this colloid state. For flocculation and coagulation action chemical agents to add back, addition of chemical agents forms floc of could settle size. That is, shorten the sedimentation time and quality of processing water because promoting sedimentation doing to do fines or suspended solids and colloid can materials large size and also, flocculation to annex efficiency of filtration augment. Therefore, I executed this research to prove that improving organic matter and chromaticity of treated water of processing epochally using organic coagulant informed positive ion co-polymerization superior in color wastewater through this research.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.110-115
• /
• 2020

The aim of this study was to investigate the wearing acceptability of chemical protective clothing during fires and to provide basic data for the safety of firefighters. The results of the study were as follows: Wearer acceptabilities of chemical protective clothing under static movement (e.g., looking at the ceiling with maximum head bending, wrapping one's arms around oneself, sitting obliquely on the floor, and maintaining a crouching position) were 21.7%-47.8% lower than those of general uniforms. When wearing chemical protective suits, the acceptability under static movement was statistically low (p < .001). Wearer acceptabilities of chemical protective clothing under dynamic movement (e.g., running, lifting a heavy object (20 kg) up to the waist, lifting and moving a heavy object (20 kg) by 1 m, lifting a stretcher and walking forward, and lifting a stretcher and walking backward) were 19.2%-47.8% lower than those of general uniforms. When wearing chemical protective suits, the acceptability under dynamic movement was also statistically low (p < .001).