• 농업과학연구
• /
• 제16권1호
• /
• pp.102-110
• /
• 1989

가열조건(加熱條件)을 달리한 감자 전분(澱粉) 호화액(糊化液)의 X-ray diffractogram과 표면구조(表面構造)를 SEM으로 촬영(撮影)하여 관찰(觀察)한 결과(結果), 전분입자(澱粉粒子)의 모양은 계란형(鷄卵形) 이었으며, 호화시간(糊化時間)과 호화온도(糊化溫度)가 증가(增加)할수록 전분입자(澱粉粒子)는 파괴(破壞)되었고, 완전(完全) 호화시(糊化時)에는 전분(澱粉)의 구조(構造)를 나타내지 않았다. 시료(試料)감자 전분(澱粉)의 구성(構成)을 검토(檢討)하기 위하여, Amylose 함량(含量)과 Blue Value를 측정(測定)한 결과(結果), 각각(各各) 23.5%, 0.49%였다. X-ray diffractogram으로 호화도(糊化度)를 측정(測定)한 결과(結果), $70^{\circ}C$에서 90 %의 호화도(糊化度)를 보였고, 동일(同一)한 온도(溫度)에서 가열시간(加熱時間)에 따른 변화(變化)는 크지 않았으며, 인산염(燐酸鹽)의 농도(濃度)가 증가(增加)할수록 호화도(糊化度)도 증가(增加)하였다.

• 한국지열·수열에너지학회논문집
• /
• 제15권4호
• /
• pp.32-38
• /
• 2019

In this study, the effect of hot water supply flow rates on energy consumption for radiant floor heating system in apartment were researched by computer simulation. The parametric study of different hot water supply flow rates was done with regard to energy performance and control characteristics, respectively. Also the effect of different hot water supply flow rates on the hot water supply temperatures is studied. As a result, energy consumption were reduced but the response time is increased by reducing the supply flow rate. And energy consumption can be saved by adjusting the hot water supply temperatures with different supply flow rates.

• 플랜트 저널
• /
• 제17권1호
• /
• pp.50-57
• /
• 2021

수력학적 효율측정 방법만으로는 펌프시스템 부속장치들의 개별효율 및 펌프 자체효율을 명확하게 산출해내기 매우 어렵다. 이에 본 연구에서는 국내 최초로 지역난방 중온수용 펌프시스템에 최신 열역학적 펌프 효율측정방법을 도입, 수력학적 방법과의 효율 병행측정 결과를 검토하였고, 그 결과 기존 수력학적 펌프효율 측정방법만으로는 데이터 불확실성이 높은 반면, 열역학적 및 수력학적 방법 병행측정 데이터를 적용한 펌프 및 유체커플링 효율값은 상호보완적 역할수행에 의해 펌프성능 측정방법의 신뢰성 및 적정성이 검증되는 의미 있는 결과를 도출할 수 있었다. 또한, 지역난방시스템에 열역학적 펌프효율 측정방법을 적용한 결과, 최대 120 ℃ 고온 환경에도 불구, 매우 안정적인 데이터 측정 및 측정장비의 내구성이 검증되는 등 열역학적 측정방법의 신뢰성을 검증할 수 있었다.

• 한국물환경학회지
• /
• 제30권5호
• /
• pp.486-490
• /
• 2014

Industrial use of microwave heating as an alternative to conventional heating is becoming popular mainly due to dramatic reductions in reaction time. Therefore, this work experimentally determined the effect of microwave irradiation on ammonia nitrogen removal in wastewater. The effects of air flow rate (0.3~0.9 L/min), treatment temperature ($70{\sim}100^{\circ}C$), and initial pH (9~11) were characterized. As the air flow rate increased from 0.3 to 0.9 L/min, the ammonia removal rate constant (k) increased from -0.6642 to $-1.0755min^{-1}$. As the temperature increased from 70 to $100^{\circ}C$, k increased -0.0338 to $-1.0755min^{-1}$. As the pH increased from 9 to 11, k increased -0.2443 to $-1.0755min^{-1}$. Ammonia removal was strongly dependent on temperature and pH rather than air flow rate. The results show that microwave irradiation is effective in ammonia nitrogen removal in wastewater due to advantages of fast and effective processing.

• Journal of Microbiology and Biotechnology
• /
• 제25권11호
• /
• pp.1936-1943
• /
• 2015

The present study developed an efficient and environmentally friendly method for recovering polyhydroxybutyrate (PHB) from Cupriavidus necator. Several non-halogenated solvents were tested and it was found that butyl acetate and ethyl acetate are powerful solvents for the biopolymer. Testing was performed to examine the effects of temperature (25℃ until temperature below solvent boiling points) and heating incubation time (0-60 min) on the two solvents. Butyl acetate had a higher recovery level (96%) and product purity (up to 99%) than ethyl acetate at 103℃ and a heating incubation time of 30 min. Under these conditions, PHB recorded the highest molecular weight of 1.4 × 10⁶ compared with the standard procedure (i.e., recovery using chloroform). The proposed strategy showed that butyl acetate is a good alternative to halogenated solvents such as chloroform for recovery of PHB.

• 한국식품조리과학회지
• /
• 제7권4호
• /
• pp.51-61
• /
• 1991

Physical and chemical properties of glycosylsucrose were characterized as follows: 1. The moisture content of glycosylsucrose syrup (35% , w/w) was 63.6% and total sugar in solid was 35.9%. 2. Main sugar compositions of glycosylsucrose syrup were maltotetraose 54.5%, sucrose 18.0%, glycosylsucrose 15.3%, maltosylsucrose 11.3% and the content of glucose, maltose, maltotriose and fructose were very little. 3. Perceived sweetness threshold of glycosylsucrose was 0.71%, relative sweetness was 0.53, and sweetness intensity expressed as power function was S=$0.78^{\circ}$C^{1.5}$$. 4. Viscosity of glycosylsucrose was higher than that of sucrose and Japanese product at 10, 25, 35 and $65^{\circ}C$. 5. The content of water absorption of gylcosylsucrose at Aw 0.80 was 0.48 g $H_2$O/g dry weight while that of sucrose was 0.17g $H_2$O/g dryweight at Aw 0.86. 6. The stability of glycosylsucrose was decreased by acidic pH, high temperature and long heating time. 7. The glycosylsucrose showed very little browning when heated with pepton, but alkaline pH (pH8), high temperature and long heating time increased browning reaction.

• 설비공학논문집
• /
• 제23권10호
• /
• pp.678-686
• /
• 2011

Simulation study on the operating characteristics in the solar hybrid R744 heat pump system for residential applications was carried out with heat pump operating temperature, outdoor temperature and solar radiation. As a result, collector operating time is decreased by 1.5 hours due to the increase of water temperature in the heat storage tank when the heat pump operating temperature rises. Heat pump operating time is reduced by 19.4% owing to the high temperature of a heat storage tank. Besides, indoor heating time is decreased from 10.3 to 5.5 hours as the indoor temperature increases from $3^{\circ}C$ to $11^{\circ}C$. In addition to, when the solar radiation rises from 10 to 20 MJ/$m^2$, the maximum outlet temperature of a solar collector is increased from $65^{\circ}C$ to $71^{\circ}C$.

• 농업과학연구
• /
• 제40권4호
• /
• pp.271-276
• /
• 2013

This experiment was carried out to determine optimal culture conditions for the production of tubers of Calla (Zantedeschia elliottiana 'Golden Affair' and 'Black Magic') in Korea highland. In vitro produced plantlets and tuberlets of Calla 'Golden Affair' and 'Black Magic' were planted plastic film greenhouse and grown for 100, 120, 140 days, with different night temperature treatments ($0{\sim}10^{\circ}C$ : no heating, 10, $15^{\circ}C$). In both cultivars, tuber size(tuber diameter, tuber height) and tuber weight increased with increasing cultivation period when the night temperature was maintained at $10^{\circ}C$. The largest tuber diameter in vitro produced plantlets was 5.8cm in 'Black Magic' and 3.2cm in 'Golden Affair', and daily tuber growth rate was 1.110g in 'Black Magic' and 0.092g in 'Golden Affair' under the culture conditions. Consequently we think that tuber harvest date was Oct. 30 and night temperature was $10^{\circ}C$ and no heating that was proper method of tuber production. However we had selection of $10^{\circ}C$ treatment for tuber production because it appeared freezing damage occasionally in highland late in October.

• 접착 및 계면
• /
• 제3권1호
• /
• pp.20-23
• /
• 2002

The wetting properties of an uncured epoxy resin on both clean and oiled, galvanised steel have been studied. Since the polymer is very viscous at ambient temperature, and also with an aim to simulate industrial conditions, the spreading of drops of resin during a heating cycle (temperature increase at $10^{\circ}C/min$) was recorded and analysed. On clean steel, a contact angle, ${\theta}$, vs time, t, plot shows sigmoidal behaviour, whereas on the oiled substrate, spreading almost ceases in an intermediate stage. This strange behaviour is attributed to significant oil absorption by the polymer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.43-46
• /
• 1989

Epoxy, noticed as a new insulation material for electrical equipments, may become an excellent cured material from the crosslink reaction with some curing agents and accelerators. The characteristics of cured epoxy is determined by the method of lattice formation according to curing method. The purpose of this paper, varing the process of lattice formation by various surrounding temperatures and heating time during the curing process, is to obtain the optimum cured condition for electrical insulation from the results of investigation on the physical and dielectric properties of cured epoxy. In this investigation, it is found that the excessive temperature and heating time brings on the growth of metamorphic methyl and the insulating properties of cured epoxy is decreased by this phenomenon. As a result, it is concluded that the optimum dielectric characteristics can be obtained when cured at a curing temperature at 14$0^{\circ}C$ for one hour.