• 에너지공학
• /
• 제27권4호
• /
• pp.20-26
• /
• 2018

지구온난화 현상이 세계적으로 점점 심각해지고 있으며 이에 대한 대책으로 에너지 원천의 다양화, 에너지 절감 기술 등이 필요하다. 본 연구에서는 태양열을 이용한 무동력 냉난방 겸용장치를 실현하기 위하여 태양열 집열기 흡수판의 재질변화, 무동력과 최소의 동력을 사용하였을 때의 특성을 비교하고자 하였다. 그 결과로서 하절기에 태양열 집열장치를 부착한 경우는 부착하지 않은 경우보다 실내온도가 약 $1^{\circ}C$ 낮았으며, 하절기에 냉원저장조가 없는 상태에서 태양열 집열장치에 의한 냉방효과는 적었다. 그러나 동절기에는 실내온도가 약 $3^{\circ}C$ 높았으며 무동력에 의한 난방효과의 가능성이 있었다. 간접적인 측정방법에 의해, Cu 재질의 태양열 집열장치의 성능은 Al 재질과 비교하여 약 2배 높았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.451-454
• /
• 2009

Production and application of biodiesel are expected to grow steadily in the coming years and thus output of its by-product, crude glycerin, will accordingly increase as well. In the present study, gasification of biodiesel by-product as a renewable energy was performed in an entrained flow gasifier to investigate the gasification performance with the operating conditions. Crude glycerin shows a high heating value of 6,000 kcal/kg and low ash and sulphur content. Gasification was conducted in a temperature range of $950\;{\sim}\;1500\;^{\circ}C$. The variation of syngas composition with excess air ratio of 0.17 ~ 0.7 for air or oxygen as a gasification agent was investigated. From the results, syngas heating value, carbon conversion and cold gas efficiency of more than $2500\;kcal/Nm^3$, 95% and 65% were achieved, respectively. The temperature dependency of syngas composition, carbon conversion, and cold gas efficiency shows a similar tendency to excess air ratio at the temperature corresponding to the excess air ratio. The $H_2/CO$ ratio of the product gas was varied from 1.25 to 0.7 with the excess air ratio and this gas composition was favorable for DME synthesis. The optimum excess air ratio for gasification of biodiesel by-product was evaluated to be an approximately 0.35 to 0.4. The present results indicate that crude glycerin can be utilized as a feedstock for gasification to make syngas.

• 한국대기환경학회지
• /
• 제33권4호
• /
• pp.361-369
• /
• 2017

In this study, the characteristics of the dust emission according to the presence or absence of operation of the gas stove were analyzed by particle size analysis and density estimation while the mackerel was cooked while the fan was placed on the gas stove used in the home. The experiment was carried out using 20 mackerel of normal size at home. Commercially available canola oil was used as edible oil. In order to understand the characteristics such as particle size distribution of fine dust, light scattering measurement method which can be measured at intervals of several seconds was used. Particles generated by combustion of gas stove, particles formed by heating cooking oil, and particles generated by heating mackerel fish meat are judged to be nano size particles smaller than $1{\mu}m$. Therefore, it is necessary to use precise measurement method rather than the measurement method using the filter which is currently being measured in the measurement of the particles discharged from the fuel combustion or food cooking in the future. Analyzing the particle size and density of the dust emitted from the cooking stove is expected to contribute technically to the reduction of dust emissions from the cooking process of gas and fuel facilities at home and commercial facilities.

• 한국환경과학회지
• /
• 제5권2호
• /
• pp.131-140
• /
• 1996

Analysis of hourly variations of sulfur dioxide ($SO_2$) concentrations affected by regional climates for the period of yellow sandy dusts was carried out from March 31 through April 9, 1993. The concentration of 50, at a coastal city, Kangnung city, was much higher than that at an inland city Wonju in the west, but the hourly distrbutions of $SO_2$ concentrations show a similar tendency at both cities. Under the prevailing synoptic-scale westerly winds blowing over a high Mt. Taegualyang in the west toward Kangnung city in the eastern coastal region, the $SO_2$ at Kangnung is trapped by an easterly sea-breeze during the day and under prevailing easterly winds, it is also isolated by the high wall of Mt. Taegualyang, with its high concentration from 14 to 16 LST. Furthermore, when the westerly winds were dominent all day long the high $SO_2$ concentrations at Kangnung were produced by its intrusion from a urban city, Wonju or China in the west into a mountainous coastal city, Kangnung, to some extent, and when the air becomes rapidly cooled down at the clear daytime or the nighttime, their concentrations are also increased by a great amount of heating fuel combustion. Especilly, its maximum concentrations were shown in Wonju and Kangnung from 08 LST through 10 LST, due to the increase of auto vehicles near the beginning time of office hour and were detected again after sunset due to both increases of vehicles at the end of office hour and heating fuel combustion. During the period of Yellow Sandy Dusts which are transported from China into Korea, the $SO_2$ concentrations on rainy days at Wonju and Kangnung were much lower than the monthly mean values of $SO_2$, and their low concentrations could be caused by the scavenging process of rain.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.193-200
• /
• 2015

Purpose: The purpose of this study was to investigate the energy saving effects and characteristics of plant growth in a greenhouse with an aluminum multi-layer curtain compared to a greenhouse with non-woven fabric. Method: The dimensions of both greenhouses $43m{\times}3.6m{\times}8m(L{\times}H{\times}W)$, and both used hot air heater systems for maintaining a constant temperature $15^{\circ}C$. Heating characteristics such as solar intensity, inside and ambient temperatures, and fuel consumption were measured and analyzed. Results: The changes of average temperature of both greenhouses during a 15-days (December 06 - 20) showed approximately $26^{\circ}C$ at around 2 pm when the ambient temperature was highest. The greenhouses were set by the heater to keep a temperature of $15^{\circ}C$ from 4 pm to 8 am the following day. The average heat loss (for 15 days) from the greenhouse with an aluminum multi-layer curtain was $161.2-268.4kJ/m^2{\cdot}h$ during the daytime and $152.3-198.1kJ/m^2{\cdot}h$ during the nighttime. The average heat loss (for 15 days) from the greenhouse with non-woven fabric was $155.7-258.9kJ/m^2{\cdot}h$ during the daytime and $144.9-207.0kJ/m^2{\cdot}h$ during the nighttime. The total heat loss (for one day) from the non-woven fabric system was $7,960kJ/m^2$($2,876kJ/m^2$ during the daytime, $5,084kJ/m^2$ during the nighttime). The heat supply over 36 days for the non-woven fabric system was higher than the aluminum multi-layer curtain system by $616.3-65,079.4kJ/m^2$. Conclusions: These results suggest that a greenhouse with an aluminum multi-layer curtain could save energy usage by 35% over a greenhouse with non-woven fabric.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.573-584
• /
• 2021

Hydrogen is evaluated as one of the new energy sources that can overcome the limitations and pollution problems of conventional fossil fuels. Although hydrogen is CO₂-free, attention is required in NO_x emission and flame stability in order to use hydrogen in existing gas fuel system. However, use of electric grids is an unrealistic strategy for decarbonization for residential and commercial heating. Instead, use of H₂ that utilizes city gas grid is suggested as a reasonable alternative in terms of compatibility with existing systems, economic feasibility, and accessibility. In this study, the thermal efficiency and NO_x performance of the boiler according to the H₂ mixture ratio and vapor humidified ratio are reviewed for a humidified NG-H₂ boiler that vapor humidity to combustion air. Mixed fuel with H₂ (20%) is almost similar to NG in terms of efficiency, flame temperature, and pollution performance. Thus, it is expected to be directly compatible with the existing NG system. If the exhaust temperature of the H₂ boiler is lowered to around 60℃ at a humidified ratio of 15-20%, the NO_x emission concentration can be suppressed to about 5-10 ppm. The level of efficiency reaches 87% of the rated load efficiency, which is equivalent to the highest grade achievable.

• 공업화학
• /
• 제31권4호
• /
• pp.443-451
• /
• 2020

본 연구에서는, 축분 고형연료의 연료적 가치를 판단하기 위해 물리화학적 특성과 열분해 동역학 분석을 수행하였다. 원소분석과 공업분석결과는 축분 고형연료는 휘발성 물질(64.94%), 탄소(44.35%) 및 수소(5.54%)의 함량이 높았다. 축분 고형연료의 저위발열량(3,880 kcal/kg) 또한 가축분뇨 고형 연료 기준(3,000 kcal/kg)보다 높았다. 열중량분석결과 축분연료는 3개의 분해온도구간을 가졌다. 첫 번째 온도구간(130~330 ℃)은 추출물의 기화, 헤미셀룰로우스 및 셀룰로우스의 분해로 구성되었다. 두 번째(330~480 ℃)와 세 번째(550~800 ℃) 온도 구간들은 리그닌의 분해와 carbonaceous materials 분해에 의한 것이었다. Friedman, FWO, KAS 같은 model free 분석방법에 의해 구해진 축분 고형연료의 열분해에 대한 활성화 에너지 값은 전환율 0.1에서 0.9 범위에서 173.98에서 525.79 kJ/mol로 나타났다. 특히, 전환율이 0.6보다 높은 구간에서 활성화에너지가 크게 증가하였다. Curve fitting 방법을 사용한 동역한 분석은 축분 고형연료가 5단계의 분해 단계로 구분될 수 있는 다단계 반응에 의해 분해됨을 제안하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.252.2-252.2
• /
• 2010

Biomass is considered to be a major potential fuel and renewable resource for the future. In fact, there is high potential to produce the large amount of energy from biomass around the world. In this study, to obtain basic data for practical application of wood pellet and wood pellet boiler system as heating system in agriculture, agricultural biomass resources were surveyed, pellet was made of agricultural by-product such as stem of rape, oat and rice, ricehusk and sawdust and wood pellet boiler system with capacity of 116 kW was manufactured and installed in greenhouse of $38.5m{\times}32m$. High heating value, bulk density and ash content of pellet made of agricultural by-product and efficiency and heating performance of this system was estimated. Rice straw was the largest agricultural biomass in 2005 and the total amount of rice straw converted into energy of $131.71{\times}10^{11}$ kJ. And in 2005, total amount of forest' by-product converted into energy of $29,277.05{\times}10^{11}$ kJ. High heating values of pellets made of agricultural by-products of stem and seed of rape, stem of oat, rice straw and rice husk were 16,034, 16,026, 16,089, 15,650, 15,044 kJ/kg respectively. High heating values of pellets made of agricultural by-products were 83.6% compared to that of wood pellet. Average bulk density of pellets made of agricultural by-products of stem and seed of rape, stem of oat, rice straw and rice husk was 1,400 $kg/m^3$. Ash contents of the pellets were 6.6, 7.0, 6.2, 5.5, 33% respectively. Ash content of rice husk pellet was the largest compared to other kind of pellets. To increase efficiency of agricultural pellet boiler, the boiler adopted secondary heat exchanger. The agricultural pellet boiler designed and manufactured in this study had high efficiency of 84.2% compared to the conventional agricultural pellet boiler, when water flow rate, exhaust gas temperature and average combustion furnace temperature were 39L/min, $180^{\circ}C$, $680^{\circ}C$ respectively. And pellet supplying and pausing time were 13, 43 seconds respectively. In March of 2010, prices of wood pellet, agricultural tax free diesel, diesel, kerosene were 350 won/kg, 811 won/L, 1,422 won/L, 976 Won/L respectively. Also in terms of energy, prices per same heating value were 77.8, 90.1, 158, 108.4 Won/Mcal. Energy saving rate of wood pellet was 16, 50, 39% compared to agricultural tax free diesel, diesel and kerosene respectively.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• 한국수소및신에너지학회논문집
• /
• 제13권4호
• /
• pp.304-312
• /
• 2002

In this study, the performance of the $5Nm^3/hr$ compact type steam reformer which was developed for application of fuel cell or hydrogen station was evaluated in terms of gas process efficiency. For these purposes, reforming efficiency and total efficiency with system load change were analyzed. The reforming efficiency was calculated from the total molar flow of hydrogen output over total fuel flow input to the reformer and the burner on the higher heating value(HHV). In the case of the total efficiency, recovered heat at the heat recovery exchanger was considered. From the results, it was known that system performance was stable, because methane conversion showed the a slight decline which is about 2% though increasing system load to full. Reforming efficiency was increased from 20% to 58%, respectively as increasing system load from 10% to 90%. It was found that total efficiency was higher then reforming efficiency because of terms of heat recovered. As a results, it was known that total efficiency was increased form 75% to 83% at the 10% and 90% system load, respectively. From these results, it is concluded that compact steam reformer which is composed of stacking plate-type reactors is suitable to on-site hydrogen generator or to fuel cell application because of quick start within 1 hr and good performance.