• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.1-7
• /
• 2018

화석연료를 사용하는 내연기관에서 배출되는 가스는 환경오염, 지구온난화와 인체에 유해하여 많은 사회적인 문제를 야기시키고 있다. 최근에는 신재생에너지의 수요가 증가하고 있으며, 정부의 정책적인 지원과 연구개발 또한 활발하다. 가정에서 많이 사용되는 태양열에너지 시스템의 집열부는 열매체로 프로필렌글리콜 부동액이 물과 50% 고정된 값으로 혼합되어 영하온도에서도 집열부에 열을 전달한다. 그러나 집열부 내의 열매체에 누수가 발생되면 태양열시스템 특성상 보충수를 태양열 집열부에 공급하는데, 이로 인하여 보충수 내의 급수로 인하여 부동액 농도가 낮아지게 된다. 이에 따라 태양열 집열부위의 온도가 저하되어 동파를 야기하게 되는데 태양열에너지 시스템 정비 보수를 위해서 비용 부담이 증가하여 많은 문제점을 증가시킨다. 이 연구는 태양열에너지 시스템에 발생되는 동파 방지를 위하여 온도 저하에 따라 자동으로 부동액 농도를 제어가능한 장치를 개발하는 것이다. 물 성분이 프로필렌글리콜보다 전기전도도가 크며, 온도가 저온으로 내려갈수록 저항값이 증가하였다. 프로필렌글리콜 농도 제어 목표값 40, 50 및 60% 값은 39.6, 50.7 및 60.1%의 프로필렌글리콜 농도값으로 보정을 통하여 제어를 해야 한다.

• 자원리싸이클링
• /
• 제24권5호
• /
• pp.15-21
• /
• 2015

폐플라스틱은 조성뿐만 아니라 다양한 플라스틱의 종류로 인하여 열분해 및 연소 속도가 달라진다. 본 연구는 폐플라스틱 고체 연료 (Refused Plastic Fuel)의 열분해 및 연소 시 설계요소 도출을 위한 열중량 분석 및 동역학 특성을 규명하였다. 열중량 분석기 (Thermogravimetric analysis)의 결과을 이용하여 동력학 특성 중 가장 일반적인 방법인 Kissinger 방법을 통하여 활성화 에너지를 구하였다. TGA의 실험 조건은 다음과 같이 설정하였다. 질소 가스유량 20 ml/min, 승온 속도 $5{\sim}50^{\circ}C/min$ 및 최대온도는 $800^{\circ}C$로 하였다. 본 연구의 폐플라스틱 열분해 특성 연구를 위하여 적용된 방법은 실제의 반응기에서 반응기의 성능, 설계 및 최적 운전조건을 결정할 때 기초자료로 사용될 수 있을 것으로 사료된다.

• Journal of Ginseng Research
• /
• 제37권1호
• /
• pp.124-134
• /
• 2013

The authentication of the physico-chemical properties of ginsenosides reference materials as well as qualitative and quantitative batch analytical data based on validated analytical procedures is a prerequisite for certifying good manufacturing practice (GMP). Ginsenoside Rb1 and Rg1, representing protopanaxadiol and protopanaxatriol ginsenosides, respectively, are accepted as marker substances in quality control standards worldwide. However, the current analytical methods for these two compounds recommended by Korean, Chinese, European, and Japanese pharmacopoeia do not apply to red ginseng preparations, particularly the extract, because of the relatively low content of the two agents in red ginseng compared to white ginseng. In manufacturing fresh ginseng into red ginseng products, ginseng roots are exposed to a high temperature for many hours, and the naturally occurring ginsenoside Rb1 and Rg1 are converted to artifact ginsenosides such as Rg3, Rg5, Rh1, and Rh2 during the heating process. The analysis of ginsenosides in commercially available ginseng products in Korea led us to propose the inclusion of the (20S)- and (20R)-ginsenoside Rg3, including ginsenoside Rb1 and Rg1, as additional reference materials for ginseng preparations. (20S)- and (20R)-ginsenoside Rg3 were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of those isolated ginsenosides was achieved according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantification, and mass balance tests. The isolated ginsenosides showed 100% purity when determined by the three HPLC systems. Also, the water content was found to be 0.534% for (20S)-Rg3 and 0.920% for (20R)-Rg3, meaning that the net mass balances for (20S)-Rg3 and (20R)-Rg3 were 99.466% and 99.080%, respectively. From these results, we could assess and propose a full spectrum of physico-chemical properties of (20S)- and (20R)-ginsenoside Rg3 as standard reference materials for GMP-based quality control.

• 대한화학회지
• /
• 제4권1호
• /
• pp.18-26
• /
• 1957

There are two problems to be solved by our efforts in the enamel frit. One is how we can cover the enamel frit thin with complete milk white as possible, and the other is how it can be, made resistant for chemicals than before one. The frit which can solved the two problems just mentioned above is titanium enamel frit. This frit has been developed in America after War Ⅱ, and now the research for concerning antimony frit into titanium frit is under development entirely. In order to develope the enamel industry in Korea, it is urgent problem to convert antimony frit into titanium frit. By the way the titanium frit is emulsified titanium oxide crystal which made through reheating the supersaturated solution of titanium oxide in the basis of glass. Unfortunately, there are many obscure points in active fact or which influence on its composition and characteristics yet. However, this task was tried for the first in Korea. As first step, the test was carried on the reference books, and we can be possible convert antimony frit into titanium frit as a result of this experiment. As a conclusion, for the purpose of developing the enamel industry in Korea, we studied that the research for converting antimony enamel frit which has been used popularly into titanium enamel frit which is more economic and resistant for chemicals. As a result of experiments, the following points concerning with titanium frit have become clearly. 1. It is better when the composition of titanium enamel frit has as following table.Man Duck San Silica 24 An Yang Feldspar 20 Borax 28 Sodium Nitrate 4 Cryolite 7 Calcium Carbonate 3.6∼1 Titanium Oxide 10 Calcium phosphate 0 ∼3.2 Calcium Fluoride 0∼1.8 Antimony Oxide 0∼0.5 2. The amount of $TiO_2$, to be added is $10%\;to\;12{%,\;CaF_2\;is\;under\;1.8%,\;P_2O_5\;is\;under\;1.6%,\;Sb_2O_3\;is\;under\;0.5%$. 3. In the titanium frit, the limit of iron oxide amount to be included is under 0. 5%. 4. Comparing the titanium enamel frit with antimony enamel frit not only the titanium frit can be savely 20.6% in the price of raw materials, but one time of glazing and heating process is omitted in each case, and it is known the titanium frit is more resistant for chemicals than antimony frit.

• 건축역사연구
• /
• 제11권2호
• /
• pp.37-56
• /
• 2002

The purpose of this study is to examine the changing process of the collective housing in Korea; focusing on the alteration process of the apartment housing, which became a representative housing type in Korea, nowadays. The alteration process of the apartment housing in Korea can be divided into three stages: the introduction stage, the trial stage and the settled stage. The introduction stage is the period between 1920, when the collective-housing buildings were constructed in Korea for the first time, and the Liberation of Korea(1945). The trial stage is the period between 1945 and 1975. During this period, common housing has been constructed. And the massive apartment buildings were started to be supplied after 1975. The settled stage is the period between 1975 and the present. The main scope of this study will be the introduction and trial stages, since a lot of in-depth studies have been executed on the settled stage. The history of the collective housing of Korea starts with City Housing of Seoul, in 1921. It is guessed that this housing was to be small-sized and row-housing type. The first-built, apartment-type building, in Korea, was Mikuni Apartment House, which was constructed as a boarding room of Mikuni Company. In the introduction stage, apartment buildings were built by Japanese architects, with Japanese housing style. Most of them were planned in dormitory type, and some of them were run as tenant houses. Most of them were constructed by bricks, but sometimes by timbers. Tadami was laid in every room and inside-corridor was located in the middle of the house. Although the major style of the apartment buildings was Japanese, the Korean dwellers of those apartments has been influencing the housing type of them. In the trial stage, apartment housing has been experienced in diverse ways. With the development of building technology, floor heating system was settled in apartment housing. This improved the amenities of apartment dwelling remarkably. Although some heterogeneous characteristics still remained in the apartments of Korea, in terms of housing style, the housing style of apartments has been changed into own style of Korea, in accordance with Korean people's life style. The results of this study give us some good implications regarding contemporary housing plan: First, if the unit size of a collective housing is small, the more space could be available for community activities. Second, when planning of collective housing, more concerns should be payed on surroundings. Third, more attention should be payed about low-rise apartment housing, and more land-friendly planning would be required.

• 동아시아식생활학회지
• /
• 제23권5호
• /
• pp.620-628
• /
• 2013

In this study, the condition for preventing abnormal fermentation was set by heating the nuruk extract, such that glycosyl enzymes maintain its activity and unnecessary microbes are removed. The total colony of microbes in the heated nuruk extract was highest in number at $25^{\circ}C$ and began to reduce at 50, $60^{\circ}C$ and sharply reduced over $70^{\circ}C$. Saccharogenic power (SP), glucoamylase and acidic protease activities were highest at $50^{\circ}C$, 10, 20, 30min and ${\alpha}$-amylase activity was lower at $50^{\circ}C$ than at $25^{\circ}C$. In the pHs of the nuruk extract, as the heat temperature became higher and treatment time was longer, the pHs were reduced significantly. The total acidities of heat treatments at 50, $60^{\circ}C$ were lower by 0.2% than at $25^{\circ}C$, where as the 70, $80^{\circ}C$ treatments showed a sharp rise from the early stage of fermentation. Soluble solids showed the same aspects with the glycosyl enzymes cases. In reducing sugar, 25, $50^{\circ}C$ treatments were sharply increased from the first day of fermentation while $60^{\circ}C$ treatments began to rise from second day 70, $80^{\circ}C$ were slightly increased after the fourth day. The normally alcohol fermented treatments were 25, 50 and $60^{\circ}C$ 30min. The $70^{\circ}C$ treatments almost did not alcohol fermentation. In the preference tests, taste and total acceptability were high at 25, $50^{\circ}C$ treatments. These results suggest that makgeolli using heat treated nuruk extract also has good taste as well as did not.

• 전자공학회논문지
• /
• 제50권2호
• /
• pp.98-103
• /
• 2013

본 연구에서는 IZO를 활성층으로 하고 $HfSiO_x$를 절연층으로 한 TFT에 대하여 그 성능을 측정하였다. $HfSiO_x$는 $HfO_2$ target과 Si target을 co-sputtering 하여 증착하였으며 RF power를 달리 하여 네 가지의 $HfSiO_x$ 박막을 제작하였다. 공정의 간소화를 위해 게이트 전극을 제외한 모든 층들은 RF-magnetron sputtering system과 shadow mask만을 이용하여 증착하였으며 공정의 간소화를 위해 어떠한 열처리도 하지 않았다. 네 가지 $HfSiO_x$ 박막의 구조적 변화를 X-ray diffraction(XRD), atomic force microscopy(AFM)을 통해 분석하였고, 그 전기적 특성을 확인하였다. 박막 내 $HfO_2$와 Si의 조성비에 따라 그 특성이 현저히 차이가 남을 확인하였다. $HfO_2$(100W)-Si(100W)의 조건으로 증착한 $HfSiO_x$ 박막을 절연층으로 한 소자의 특성이 전류 점멸비 5.89E+05, 이동도 2.0[$cm^2/V{\cdot}s$], 문턱전압 -0.5[V], RMS 0.263[nm]로 가장 좋은 결과로 나타났다. 따라서 $HfSiO_x$ 박막 내의 적절한 $HfO_2$와 Si의 조성비가 계면의 질을 향상시킴은 물론, $HfO_2$자체의 trap이나 defect를 효과적으로 줄여 줌으로써 소자의 성능 향상에 중요한 요소라 판단된다.

• 한국환경과학회지
• /
• 제27권4호
• /
• pp.241-250
• /
• 2018

The objective of this study was to estimate air quality trends in the study area by surveying monthly and seasonal concentration trends. To do this, the mass concentration of $PM_{10}$ samples and the metals, ions, and total carbon in the $PM_{10}$ were analyzed. The mean concentration of $PM_{10}$ was $33.9{\mu}g/m^3$. The composition of $PM_{10}$ was 39.2% ionic species, 5.1% metallic species, and 26.6% carbonic species (EC and OC). Ionic species, especially sulfate, ammonium, and nitrate, were the most abundant in the $PM_{10}$ and had a high correlation coefficient with $PM_{10}$. Seasonal variation of $PM_{10}$ showed a similar pattern to those of ionic and metallic species. with high concentration during the winter and spring seasons. $PM_{10}$ showed high correlation with the ionic species $NO_3{^-}$ and $NH_4{^+}$. In addition, $NH_4{^+}$ was highly correlated with $SO{_4}^{2-}$ and $NO_3{^-}$. We obtained four factors through factor analysis and determined the pollution sources using the United States Environmental Protection Agency(U.S. EPA) pollution profile. The first factor accounted for 51.1% of $PM_{10}$ from complex sources, that is, soil, motor vehicles, and secondary particles: the second factor indicated marine sources; the third factor, industry-related sources; and the last factor, heating-related sources. However, the pollution profile used in this study may be somewhat different from the actual situation in Korea because it was from US EPA. Therefore, to more accurately estimate the pollutants present, it is necessary to create a pollution profile for Korea.

• 한국세라믹학회지
• /
• 제39권2호
• /
• pp.204-209
• /
• 2002

본 연구에서는 AUC 공정에서 발생되는 액체폐기물에 미량 함유되어 있는 우라늄을 회수/재사용하기 위해 액상에서 침전법을 이용하여 용해도가 작은 우라늄화합물을 얻었으며, 이 화합물에 대한 chemical analysis, thermal analysis, x-ray diffraction analysis 및 FT-IR 분석을 통해 물성 특성을 해석하였다. 연구결과, 화학분석 및 FT-IR 분석으로부터 우라늄화합물은 $UO_4{\cdot}2NH_4F$ 형태를 가지고 있음을 알 수 있었으며, 평균 2∼3${\mu}m$ 입자 크기를 갖는 hexagonal 형태를 나타내었다. 열 분해시 분해 온도에 따라 중간물질로 $UO_4F,\;UO_4,\;UO_3,\;U_3O_8$ 등으로 변환되었으며, 상온에서 800$^{\circ}C$까지의 공기분위기에서 일정한 가열속도로 열분해시킬 경우, $UO_4{\cdot}2NH_4F{\rightarrow}UO_4F{\rightarrow}UO_4{\rightarrow}UO_3{\rightarrow}U_3O_8$의 반응 메커니즘을 나타내었다.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.136-142
• /
• 2004

출발물질로 zinc acetate dihydrate(Zn($CH_3$COO)$_2$$.$2$H_2O$)를 사용하였고, 이 물질을 isopropanol(($CH_3$)$_2$CHOH)-monoethanolamine(MEA:H$_2$NCH$_2$C$H_2O$H) 용액에 용해하여 균일하고 안정한 sol을 만들었다. Sol-gel spin-coating 법에 의해 ZnO 박막을 제조시 예열 온도에 따른 박막의 c-축 배향성과 그 물리적 특성을 조사하였다. c-축으로의 성장은 예열 온도의 변화에 따라 차이를 보였으며. 275$^{\circ}C$에서 예열 후 $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 XRD 측정결과 기판에 수직한 (002) 방향으로 강한 배향성을 나타내었다 200∼30$0^{\circ}C$에서 예열 후, $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 UV-vis측정결과 가시광선 영역에서 온도에 따른 투과도의 변화를 보이지만 평균 85% 이상의 높은 투과도를 보였다. 또한 370nm 부근에서 흡수단을 나타내었으며, 광학적 밴드갭은 약 3.22 eV로 나타났다. 발광방출(PL) 측정결과, 황색(620nm, 2.0 eV)발광이 관찰되어, 무기발광 소자로의 응용 가능성을 나타내었다.