• Journal of Acupuncture Research
• /
• 제17권2호
• /
• pp.247-259
• /
• 2000

Objective : The mechanism of acupuncture to increase cerebral blood flow is still uncertain. The purpose of this study was to evaluate the neural basis of acupuncture by comparing the cerebral regions activated by the stimulation of two different methods of acupunctures at the same acupoint which was suggested by oriental medicine to increase rCBF. Materials and Methods : Thirty-nine healthy volunteers(26 males, 13 females, age $31{\pm}11$ years) were studies by rest/acupuncture Tc-99m ECD brain SPECT using a subtraction method. SPECTs using two methods(needle retention and heated needle with 90% alcohol) at two acupoints (right LI. 4 and ST. 36) were peformed at an interval of three days. For the needle retention method, acupuncture needle was inserted to a depth of about 2 cm into each acupoint 8 minutes after the lst acquisition and continued to retain, and the second injection of Tc-99m ECD was done 15 minutes after the insertion of needle. For the heated acupuncture method, heated needle was inserted in a twinkle within several msec 20 second after the second injection of Tc-99m ECD. The differences of between rest and acupuncture activation state were statistically analyzed using a statistical parametric mapping software. Result : Acupunctures of both methods reveal similar patterns of increase in rCBF. Acupuncture at ST.36 increase rGBF in left anterior temporal, right inferior frontal lobes, and left cerebellum. Acupuncture at LI. 4 increase rCBF in the left frontal cortex, right temporal pole, both inferior frontal cortices and right cerebellum. Conclusion : The effects of two different acupunctures to the same acupoints on rCBF were similar. Therefore, this result suggests Chat the mechanism of acupuncture in the increase of cerebral blood flow have a neural basis.

• 한국주조공학회지
• /
• 제21권3호
• /
• pp.179-186
• /
• 2001

Melt super-heating which promotes shape modification of ${\beta}$ intermetallic compounds was conducted to improve mechanical properties of recycled AC2B aluminum alloy. Modification of needle-shape ${\beta}$ intermetallic compounds was effective for the specimens of AC2B aluminum alloys containing 0.85wt.% Fe by melt super-heating, in which the melts had been held at $850^{\circ}C$ or $950^{\circ}C$ for 30 minutes respectively. Owing to the modification of needle-shape of ${\beta}$ intermetallic compounds by melt superheating of the alloy with containing 0.85wt.% Fe to $950^{\circ}C$, increases in elongation and tensile strength were prominent to be more than double and 55% respectively in comparison with the melt heated to $740^{\circ}C$. Moreover, modification of needle-shape ${\beta}$ intermetallic compounds in the alloy containing O.85wt.% Fe by $950^{\circ}C$ melt super-heating led to 48% improvement of the value of impact absorbed energy as compared with the melt heated to $740^{\circ}C$.

• Journal of Acupuncture Research
• /
• 제20권4호
• /
• pp.192-208
• /
• 2003

Burning acupuncture is one of the methods of curing and preventing many kinds of diseases by inserting and taking out of the needle into particular points of the body so called acupuncture points, using a heated Dae-Chim which is one of the nine kinds of needles used in ancient times or by inserting a thick needle after its been heated to certain temperature. Nowadays in China, Burning Acupuncture is used thoroughly from musculoskeletal diseases to, internal medicine, gynecology and many other clinical departments. But in Korea, this method of cure is practiced by only a few clinicians, therefore by studying historical documents, our object is to recognize the importance of the Burning acupuncture and to offer the basis for the scientific researches and clinical application.

• 열처리공학회지
• /
• 제5권3호
• /
• pp.171-178
• /
• 1992

The effect of nozzle characterristics on the mist-cooling heat transfer was investigated under the various flow conditions. Two different types of twin fluid nozzle were used, one is a $90^{\circ}$ angle tip nozzle with needle and the other is a $90^{\circ}$ angle tip non-needle nozzle. The cooling rate from the heated surface was measured and obtained the boiling curve as a function of surface temperature. An immersion sampling was employed for the measurement of droplet size of the spray. As a result of this experiment, the liquid sheet type nozzle shows better atomization when the mass ratio Mr>2.0, and collects more liquid droplets on the heated surface that results in better cooling effect. It was found that the maximum heat flux and heat transfer coefficient increased with increase in the volumetric flow rate, whereas the maximum heat flux decreased with increase in spray distance. The cooling effect depends upon the amount of collected droplet and droplet size, but it strongly depends upon the amount of collected droplet.

• Journal of Acupuncture Research
• /
• 제30권3호
• /
• pp.87-99
• /
• 2013

Objectives : The objective of this study is to find out the method and effects of fire needling on frozen shoulder in China. Methods : We searched journals using the China National Knowledge Infrastructure(CNKI) and PubMed. The keywords were a combination of "fire needling", "fire needle", "burning acupuncture", "frozen shoulder", "adhesive capsulitis", "periarthritis". Results : There were 23 studies finally selected, 7 were case control studies and 16 were case series studies. There were 9 out of 14 main meridians and 31 kinds of acupoints. The most frequently adopted meridians were LI, SI and TE. The most frequently used acupoints were $LI_{15}$, $SI_9$ and $TE_{14}$. Adjacent points were used more often than distant points. They usually heated the needle before insertion and needle retention was mostly not done. 7 case control studies showed that fire needling reported better results than the filiform needle or electro-acupuncture treatment. 15 case series studies reported a significant improvement in fire needling on frozen shoulder patients. Conclusions : There have been many studies regarding fire needling on frozen shoulder in China. Further studies should be required and these can be applied to clinical practices in Korea.

• Korean Journal of Acupuncture
• /
• 제40권4호
• /
• pp.184-193
• /
• 2023

Objectives : The purpose of this study is to understand the temperature characteristics depending on the thickness and material of the needle used with the Electronic Warm Acupuncture Device (EWAD). Methods : We controlled experimental environment and measured temperature changes of a silicon phantom in which K-type thermocouples were inserted at depths of 2, 7 mm. EWAD perfomed with acupuncture needles of various thicknesses (0.25×60 mm, 0.40×60 mm, and 0.50×60 mm) and materials (Gold 0.40×50 mm). We set non-needle (only heated with EWAD skin heater) group as a control group. Results : The maximum temperature and temperature changes of 0.40 mm, 0.50 mm needle group were significantly higher than the non-needle group. The highest temperature range in all needle groups was 0.50 mm needle group (41.44±0.31℃). However, the 0.25 mm needle group was not significantly different from the non-needle group. Maximum temperature of gold needle group was significantly higher than stainless steel needle group. Temperature changes of gold needle group were higher than stainless steel group at the depth of 7 mm. Conclusions : It was found that needle thickness and material of acupuncture had an effect on the temperature of the EWAD. When performing EWAD treatment, consideration of thickness and material of acupuncture is needed. Future research is needed using phantoms that can reflect actual clinical situations and better mimic the human body.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.747-749
• /
• 2002

Hydroxyapatite powders were prepared after heating at $1250^{\circ}C$ by the direct reaction using oyster shells and $H_3$$PO_4$. Properties of hydroxyapatite powders were investigated as XRF, XRD, DTA, FT-IR, SEM. Only hydroxyapatite was observed in XRD powders which was heated at $1250^{\circ}C$ for 2 hours and there was no remained CaO in that sample. And the results of FT-IR of sample was confirmed hydroxyapatite. Sample was agglomerated together, but needle shape morphology was observed in powders heated at $1250^{\circ}C$.

• 한방안이비인후피부과학회지
• /
• 제32권4호
• /
• pp.162-166
• /
• 2019

Objectives : This report is intended to suggest that lentigo can be removed using the cauterization. Methods : Handle of the needle, which is distal part to the tip and shaft, was heated with an alcohol lamp to cauterize the lentigo one by one to form a crust, and wet dressing was applied to the treatment sites by using Hwangryunhaedok-tang pharmacopuncture solution. Results : Ten days after the cauterization, the lentigo was cleared from the normal skin without adverse reactions. Conclusions : The cauterization is a useful technique for removing lentigo, but the conventional method is somewhat inconvenient, so a radiofrequency technique or a laser-based cauterization may be more useful Instead of the traditional cauterization.

• 태양에너지
• /
• 제7권2호
• /
• pp.65-73
• /
• 1987

Microstructural basis for the thermal degradation of electrodeposited black chrome "solar-L-foil" heated in air has been investigated using scanning electron microscopy, energy dispersive x-ray analysis, X-ray diffraction techniques and UV-VIS-NIR spectre-photometer. Experimental result, the change in the shape of the particle comprising the film from their initial needle like structure to a more spherical shape with an oxide after 1hr annealing at $600^{\circ}C$ has been observed. The effect is to degrade solar absorptance of the thin film.

• 한방재활의학과학회지
• /
• 제24권3호
• /
• pp.111-119
• /
• 2014

Objectives This study aims to analyze a thermal distribution in biological living tissue during warm needling therapy by using a finite element method. The analysis provides an understanding of warm needling's efficacy and safety. Methods A model which consisted of four-layered tissue and stainless steel needle was adopted to analyze the thermal distribution in living tissue with a bioheat transfer analysis. The governing equation for the analysis was a Pennes' bioheat equation. A heat source characteristic of warm needling therapy was obtained by previous experimental measurements. The first analysis of the time-dependent temperature distribution was conducted through points on a boundary between the needle and the tissue. The second analysis was conducted to visualize the horizontal temperature distribution. Results When heat source's peak temperatures was above $500^{\circ}C$ and temperature rising rates were relatively slow, the peak temperature at skin surface exceeded a threshold of pain and tissue damage ($45^{\circ}C$), whereas when the peak temperature was around $400^{\circ}C$, the peak temperature at the skin surface was within a safe limit. In addition, the conduction of combustion energy from the moxa was limited to the skin layer around the needle. Conclusions The results suggest that the skin layer around the needle can be heated effectively by warm needling therapy, but it appears to have little effect at the deeper tissue. These findings enhance our understanding of the efficacy and the safety of the warm needling therapy.