• 동의생리병리학회지
• /
• 제31권2호
• /
• pp.145-152
• /
• 2017

The purpose of this study was to investigate the clinical research of Cold-Heat of pattern identification(PI) focused on quantitative indicators for general people in Korea, through the review of OASIS, KISS, DBpia, NDSL database. Ten clinical researches were analyzed in this study. These research gradually started from 2004 to 2009 but there was no research after 2010. Diagnosis of Cold-Heat PI all was done through a questionnaire, 7 or most researches had not used the intervention methods. Quantitative indicators related to the Cold-Heat PI mentioned in the selected 10 researches are seven, these indicators include heart rate variability(HRV), electroencephalogram, Yangdorak, respiratory index, electrogastrography, acoustic analysis index, western health test index. Related to the HRV were 3 researches, but correlation of significant indicators was a few levels(R=0.026-0.090). So far, studies regarding at the quantitative indicators of the prior the Cold-Heat PI were few, and the results of the study showed that low statistical precision, a lack of biological basis. Refer to the current state, in the future, we expect that research of quantitative indicators of scientific evidence-based through calculated and precise research concerning Cold-Heat PI be regarded as important in Korean Medicine.

• 소성∙가공
• /
• 제12권5호
• /
• pp.473-478
• /
• 2003

This study presents the enhancement of forgeability of SNCM522H materials. Target parts are output shaft(OP shaft) used as components of power train for automobiles. To carry out cold forging process of OP shaft by 1 pass instead of existing 2 pass process, studies in terms of process design and heat treatment were performed. To introduce the new process, the finite element method was accomplished, and to assess the validity of proposed heat treatment cycle, several experiments(hardness test, observation of optical microstructures, tensile test) were carried out. The 2Pass forging process could be reduced as lPass process through improvement of process and heat treatment technology and that would give cost reduction.

• 근관절건강학회지
• /
• 제2권2호
• /
• pp.147-159
• /
• 1995

Although there are many research studies on the effectiveness of heat and cold therapy for patients with arthritis at home or health care center, little attention has been paid to determining which therapy associates with season is effective for patients with chronic arthritis. The purpose of this study was to explore the effectiveness of heat and cold therapy associated with season for patients with arthritis. An experimental design using replications with intervention was employed. A total of 27 female arthritic patients were selected. Data were collected in summer and winter. Hot bag and ice bag were applied on each patient's knee for each 20 minutes alternatively. Joint pain, discomfort and range of motion were measured. Data were analyzed using paired t-test, and two-way ANOVA. The results of this study were ; 1. Joint pain Heat therapy was effective for pain relief, as compared with cold therapy. Heat therapy was more effective for pain relief in winter than in summer. Cold therapy was effective for pain relief, but there was no statistically significant difference of pain relief between summer and winter. 2. Discomfort Discomfort was decreased using heat therapy, whereas it was increased using cold therapy. Although discomfort was decreased using heat therapy in both summer and winter, there was no statistically significant difference of discomfort between summer and winter. Using cold therapy, discomfort was decreased in summer, but increased in winter. and season had effect on discomfort. 3. Range of motion Although there was no statistically significant difference between the range of motion for both heat and cold therapy, range of motion was Increased using both heat and cold therapy. In winter, range of motion was increased rather than in summer by using heat therapy. Using cold therapy, The range of motion was decreased in both summer and winter. There was no stastistically significant difference of range of motion between heat therapy and cold therapy. Furthermore, there was no statistically significant difference of range of motion between summer and winter. In conclusion, both heat and cold therapy were effective for pain relief, discomfort, and range of motion, especially heat therapy. Heat therapy was effective for pain relief, discomfort, and range of motion in winter, as compared with summer. Cold therapy, however, was effective for only pain relief in winter, The findings suggest the use of heat therapy for patients with arthritis especially in winter.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.243-251
• /
• 2007

This experiment was conducted to investigate the effect of particles on the heat transfer characteristics of fluids flowing in a cold water tube. Plastic beads with 3 different sizes were used as flowing particles with cold water. An experimental test section was composed of concentric double tubes having diameters of 25mm for the inner tube and 50mm for the outer tube. The materials for the inner and outer tubes are copper and PVC respectively. It was found that the particles enhanced the heat transfer coefficient by random and vortex motion in the fluid. Hence the heat transfer coefficients for the fluid with 2mm, 5mm and $2{\times}6mm$ particles were $7%{\sim}37%$ higher than the fluid without the particles.

• 한국분말재료학회지
• /
• 제20권4호
• /
• pp.245-252
• /
• 2013

This study attempted to manufacture a Cu-Ga coating layer via the cold spray process and to investigate the applicability of the layer as a sputtering target material. In addition, changes made to the microstructure and properties of the layer due to annealing heat treatment were evaluated, compared, and analyzed. The results showed that coating layers with a thickness of 520 mm could be manufactured via the cold spray process under optimal conditions. With the Cu-Ga coating layer, the ${\alpha}$-Cu and $Cu_3Ga$ were found to exist inside the layer regardless of annealing heat treatment. The microstructure that was minute and inhomogeneous prior to thermal treatment changed to homogeneous and dense with a more clear division of phases. A sputtering test was actually conducted using the sputtering target Cu-Ga coating layer (~2 mm thickness) that was additionally manufactured via the cold-spray coating process. Consequently, this test result confirmed that the cold sprayed Cu-Ga coating layer may be applied as a sputtering target material.

• 대한예방한의학회지
• /
• 제21권1호
• /
• pp.49-56
• /
• 2017

Objectives : In this study, we diagnosed Mibyeong group of adult by taking into Mibyeong Index consideration, and identified the correlation of a Mibyeong group with cold-heat pattern and life quality of them. Methods : The questionnaires were collected by Gallup Korea professional surveyor through face to face interviews. To analyze the differences between health and mibyeong group, we used the descriptive statistics, Pearson's correlation, ANOVA. And multinomial logistic regression was used to generate the odds ratios (ORs) and 95 % confidence interval (CI) for the differences between health and mibyeong group. Results and Conclusions : The gender composition of respondents in this study that there 545 male (49.5%) and 555 female (50.5%). The score of both cold pattern(health: $21.33{\pm}4.25$, MI 1: $22.43{\pm}4.29$, MI 2: $24.09{\pm}5.03$; post hoc test, p <0.001) and heat pattern(health: $18.4{\pm}4.01$, MI 1: $19.48{\pm}4.10$ MI 2: $19.88{\pm}4.81$; post hoc test, p <0.001) in mibyeong group is higher than the score health group. And, these result have no relevance to age. The score of both Physical component summary (PCS) and Mental component summary (MCS) in health group is higher than the score mibyeong group. Cold-heat pattern and quality of life vary significantly according to health status. This results suggest the analysis of cold-heat pattern and quality of life by health status could provide the setting of direction to promote public health depending on health status.

• 소성∙가공
• /
• 제23권7호
• /
• pp.419-424
• /
• 2014

In order to improve efficiency, an outdoor unit using a refrigerant cooling method is designed into many air conditioner systems. The heat exchanger is composed of a Cu tube and an plate. The optimal design for the cold plate is very important because the efficiency of the heat transfer depends on the contact area between the Cu tube and the cold plate. The current study focused on the design of the cold plate to obtain a uniform contact between the Cu tube and the cold plate. Both FE(finite element) analysis and optimization were used in the design. The contact area between the tube and plate was predicted and improved by 16% through the press forming simulations. The springback after press forming was also reduced when the optimized design parameters were used. To verify the validity of the optimal cold plate design, a verification test was conducted. As a result, the performance of the heat exchanger improved by 34% when compared to benchmarked products.

• 한국가스학회지
• /
• 제2권4호
• /
• pp.25-33
• /
• 1998

본 연구는 LNG냉열활용을 위해 초저온 열교환시스템을 제작하고 액화질소와 에틸렌-글리콜 수용액을 작동유체로 사용하여 증발 열전달 특성실험을 수행하였다. 초저온 열교환기는 2중관식 열교환기이며, 내부관 지름이 8, 15 mm이며 길이는 6m이다. wire-coil inserts를 사용하여 열전달촉진 성능평가를 수행하였다. 액화질소와 에틸렌-글리콜 수용액의 출입구 온도, 벽면온도, 유량, 압력을 측정하였고, 이를 증발 열전달계수와 누셀트수를 계산하는데 사용하였다. 열전달상관식을 누셀트수, 프란틀수와 등가레이놀즈수의 멱법칙관계로 제안하였고, 그 결과 열전달촉진관이 평활관보다 2.5 ${\~}$ 5.5배정도 열전달이 증가되었다. 이 상관식을 이용하여 LNG냉열이용을 위한 초저온 2중관 열교환기를 설계하였고, 그 결과로 제시하였다.

• Journal of Acupuncture Research
• /
• 제23권1호
• /
• pp.25-38
• /
• 2006

Objectives : Acupuncture has been widely used in oriental medicine. The aim of this research is to study how does the interaction between reinforcement-reduction by twirling nine and six and subject's cold or heat tendency effect on Heart Rate Variability. Methods : We divided our subjects into 3 groups at random and classified subjects by their cold or heat tendency using questionnaire for cold-heat patternization. Group 1 is acupuncture at shinmun(HT7) reinforcement group, 2 is acupuncture at shinmun(HT7) reduction group, 3 in acupuncture at hapkok(LI4) group. According to their group, we acupunctured. Before and after acupuncture Heart Rate Variability raw data were measured during 5 minutes. LF, HF, LF norm HF norm were calculated. We analyzed these data using 3-way repeated ANOVA, Paired student T-Test. Results : 3-way repeated ANOVA showed significant interaction among LF, each group and subject's cold heat tendency(p<0.05). Paired student T-Test showed significant differences between before and after acupuncture at shinmun(HT7) reinforcement method in cold tendency men and acupuncture at shinmun(HT7) reduction method in heat tendency men(p<0.05). Conclusion : These results suggest that acupuncture at Shinmun(HT7) has an effect on declining sympathetic nerve function and has an effect on stabilizing mind through Interaction between reinforcement-reduction by twirling nine and six and subject's cold or heat tendency. We propose that more prudent care is needed about subject's cold or heat tendency and acupuncture technique of reinforcement-reduction to achieve the most suitable treatment effect.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.124-133
• /
• 2017

In-vessel retention by passive external reactor vessel cooling under severe accident conditions is a viable approach for retention of radioactive core melt within the reactor vessel. In this study, a new and versatile coating technique known as "cold spray" that can readily be applied to operating and advanced reactors was developed to form a microporous coating on the outer surface of a simulated reactor lower head. Quenching experiments were performed under simulated in-vessel retention by passive external reactor vessel cooling conditions using test vessels with and without cold spray coatings. Quantitative measurements show that for all angular locations on the vessel outer surface, the local critical heat flux (CHF) values for the coated vessel were consistently higher than the corresponding CHF values for the bare vessel. However, it was also observed for both coated and uncoated surfaces that the local rate of boiling and local CHF limit vary appreciably along the outer surface of the test vessel. Nonetheless, results of this intriguing study clearly show that the use of cold spray coatings could enhance the local CHF limit for downward-facing boiling by > 88%.