• 제목/요약/키워드: heat switch

검색결과 72건 처리시간 0.025초

Plasma Burner 구동을 위한 무손실 단일 스위치 인버터 (Lossless Single-Switch Inverter for Plasma Burner Drive Application)

  • 강경수;김상연;김세민;이정준;노정욱
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2015년도 전력전자학술대회 논문집
    • /
    • pp.201-202
    • /
    • 2015
  • 기존 Plasma Burner용 인버터 구동회로의 경우, Full Bridge Inverter를 사용하기 때문에 소자수가 많고 스위칭 손실이 큰 문제점이 있다. 본 논문은 Plasma Burner 구동을 위한 무손실 단일 스위치 인버터를 제안한다. 기존 Full Bridge Inverter를 사용하는 Plasma Burner 구동회로의 경우에는 4개의 스위치를 사용하기 때문에 스위치 손실이 매우 크고, Heat-sink 크기가 커지는 단점이 있다. 반면 제안된 Plasma Burner 구동을 위한 무손실 단일 스위치 인버터는 1개의 스위치를 사용하고, 스너버의 전력 손실이 최소화되기 때문에 전력 손실이 매우 작고 Heat-sink 최소화 및 고효율화가 가능한 장점을 갖는다. 본 논문에서는 제안된 Plasma Burner 구동을 위한 무손실 단일 스위치 인버터의 이론적인 특성을 분석하고 모의실험을 통해 확인하였으며, 15W급 Plasma Bunrer에 적용하여 실험을 통해 우수성을 검증하였다.

  • PDF

Effects of Dietary Protein Sources and Levels on Heat Production and Thermoregulatory Responses of Sheep Exposed to a High Ambient Temperature

  • Sudarman, A.;Ito, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권11호
    • /
    • pp.1523-1528
    • /
    • 2000
  • Four Suffolk ewes were used in Latin Square switch over design to study the effects of varying levels and sources of protein on heat production and thermoregulatory responses at daytime high ($33^{\circ}C$ temperature. They were fed Italian ryegrass hay supplemented with fishmeal and/or urea, providing three different levels of crude protein (CP) (low/unsupplemented: 7.9, medium: 11.6, and high: 15.8%) at $1.5{\times}maintenance$. Feeds were distributed at 0900 (30%) and 1700 (70%). Urea diet caused higher heat production and increased vaginal temperature compared to fishmeal and fishmeal-urea mix diets. Time spent standing, skin temperature and respiration rate of sheep fed urea were similar with those of sheep fed fishmeal. Sheep fed diet with low CP level had higher heat production, increased vaginal and skin temperature than sheep fed diet with medium CP content. Sheep on high CP diet produced significantly more heat than sheep fed medium CP diets. Their vaginal temperatures were similar with those of sheep fed medium CP diet but lower than those of sheep fed low CP diet. Respiration rates of sheep and time spent by them for standing on all diets did not differ significantly. These results suggest that urea is inferior protein supplement for thermoregulation of animal at hot environment, as it induced higher heat production than fishmeal and fishmeal-urea mix. Thermoregulatory response on fishmeal-urea mix diet was similar to fishmeal diet. Increasing CP of the diet from low to medium gives advantage for thermoregulation of animal. Increasing CP further to high level was not beneficial as it resulted in the responses of sheep similar to those on low protein diet.

웨어러블 디바이스를 이용한 기능성 스마트 재킷 개발 및 평가 (Development and Evaluation of Smart Jacket with Embedded Wearable Device)

  • 이정란
    • 한국의류학회지
    • /
    • 제32권3호
    • /
    • pp.395-407
    • /
    • 2008
  • As global interest in clothing spreads over the smart clothing which arouses high added-value in the apparel industry, this study is to develop a smart jacket with an electrically-vibrating device maintaining excellent appearance and comfort. The vibrating device has a massage function that could relieve muscle pain near shoulders and neck. The purposes of this research are to develop jacket pattern for men in their thirties considering body shapes and fashion trend, to develop a wearable device that is composed of motor and controller and integrate it into a jacket, and to assess the external appearance and functional satisfaction of the smart jacket through the wearing test. The results are as follows: 1. In order to develope an appropriate jacket pattern for men in their thirties, several patterns were assessed for their fitting comfort. The final pattern was completed after making alterations some parts, and showed high satisfaction as 3.6(on a five-point scale) in all categories. 2. A vibrating device was developed by connecting motor, controller, battery and switch. Developing this device, focus was maximizing the strength of motor and minimizing the heat generated from motor and controller. Snaps were placed between inner and outer cloth of jacket so that the vibrating device could be easily attachable and detachable. The motor was located around Trapezius where muscles often get stiff. A switch was designed to be used in selecting the modes of Strong, Weak, and Cross Tapping. 3. The wearing test was conducted to examine outer appearance, comfort for motion, and functionality of the smart jacket. The results of assessing outer appearance showed that the location for attaching the vibrating device was not noticeable but looked natural, and there is almost no change in outer appearance when the vibrating device operates. The result of assessing comfort of action revealed that wearer's satisfaction was high in all categories about activity, wearer's comfort, etc. The result also showed that wear's satisfaction for effects of vibrating massage, easiness in using the device, heat generation was not less than 3.5 in all categories except a category about noise.

지하철 화재시 제연모드에 따른 열 및 연기 배출 특성 연구 (A Study on Heat and Smoke Exhaust Characteristics from the Subway Fire for Different Ventilation Modes)

  • 장희철;윤경범;박원희;김태국
    • 한국방재학회 논문집
    • /
    • 제8권3호
    • /
    • pp.37-42
    • /
    • 2008
  • 본 연구는 지하철에서 화재발생시 최적의 제연모드 예측을 목적으로 수치해석을 수행하였다. 현재 국내 지하철 화재발생시 제연모드는 승강장 내 화재구역 배기, 비화재구역 급기 또는 정지로 설정 되어있다. 수치해석 조건은 2가지 국내 비상시 제연모드 및 발화 4분(승강장 피난허용시간, NFPA 130) 이전까지 승강장에서 배기를 하며, 발화 4분이 후 터널 배기로 전환되는 스위치모드의 3가지 경우에 대하여 비교 분석하였다. 승객 호흡높이(1.7 m)를 기준으로 열, 일산화탄소 및 가시거리를 비교하였다. 수치해석 결과 급기팬 작동은 연기를 교란시키고 확산시킬 수 있으며, 또한 승강장 및 터널 제연모드로 작동할 경우 승강장의 제연모드로만 작동한 경우에 비하여 연기 배출에 효과적임을 확인할 수 있었다.

고속 스위칭 및 고 전력밀도 강압형 컨버터를 위한 무손실 스너버 (Non-Dissipative Snubber for High Switching Frequency and High Power Density Step-Down Converters)

  • 신정민;박철완;한상규
    • 전력전자학회논문지
    • /
    • 제22권4호
    • /
    • pp.345-352
    • /
    • 2017
  • In this paper, a non-dissipative snubber for reducing the switching losses in the step down converter is proposed. The conventional step down converter, e.g., buck converter, suffers from serious switching losses and consequentially heat generation because of its hard switching. Thus, it is unsuitable for high switching frequency operation. Reduction of the reactive components' size, such as an output inductor and capacitor, is difficult. The proposed snubber can slow down the increasing current slopes and switch voltage at turn-on and turn-off transients, thereby significantly reducing the switching loses. Additionally, the slowly increasing current during switch turn-on transition, can effectively solve the output rectifier diode reverse recovery problem. Therefore, the proposed non-dissipative snubber not only leads to the efficiency of converter operation at high switching frequency but also reduces the reactive components size in proportion to the switching frequency. To confirm the validity of the proposed circuit, theoretical analysis and experimental results from a 150 W, 1 MHz prototype are presented.

태양광 MIC 시스템의 효율향상을 위한 새로운 Active Clamp 스위칭 기법 (A Novel Active Clamp Switching Method To Improve of Efficiency For Photovoltaic MIC)

  • 박병철;박지호;송성근;박성준;신중린
    • 전력전자학회논문지
    • /
    • 제18권5호
    • /
    • pp.477-484
    • /
    • 2013
  • This paper proposes a novel switching method of active clamp snubber for efficiency improvement of PV module integrated converter(MIC) system. Recently, MIC solar system is researched about the efficiency and safety. PV MIC system is used active clamp method of snubber circuit for the price and reliability of the system. But active clamp snubber circuit has the disadvantage that system efficiency is decreased for switch operating time because of heat loss of resonant between snubber capacitor and leakage inductance. To solve this problem, this paper proposes a novel switching method of the active clamp. The proposed method is a technique to reduce power consumption by reducing the resonance of the snubber switch operation time and through simulations and experiments proved the validity.

소프트 스위칭 3상 단일 스위치 승압형 컨버터 (Soft Switched Three-Phase Single Switch Boost-Type Converter)

  • 문상필;전찬욱;박성우;김대웅;김영문;서기영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.1166-1168
    • /
    • 2003
  • In most power electronic applications, the AC power input provided by the electronic utility needs to first converted to a DC voltage. Such conversion is accomplished by a diode rectifier due to its circuit simplicity and low cost. However, since diode rectifiers have some intrinsic problems such as low power factor and high harmonic distortion, a wide use of such rectifiers may cause noises, malfunction and heat damage in both electrical power systems and electrical machinery systems. This paper proposes soft switched three-phase single switch boost-type converter. The proposed circuit can perform Zero Voltage Switched(ZVS) without using any current and voltage sensors. For this circuit, both simulation and experiments have been performed. The results not only confirmed the ZVS but also indicated that, compared to the conventional hard switched converter, the prosed circuit can improve the efficiency as much as 1.7 to 4.7[%] while keeping the same high power factor and small harmonic distortion in their AC input.

  • PDF

전동차 화재시 승강장 및 터널 환기실의 팬 작동에 따른 열 및 연기 배출 특성 연구 (Study on Heat and Smoke Exhaust Characteristics for Different Operating Modes of Platform and Tunnel Fans during a Passenger Train Fire)

  • 장희철;김태국;손봉세;박원희
    • 한국화재소방학회논문지
    • /
    • 제22권1호
    • /
    • pp.61-67
    • /
    • 2008
  • 본 연구에서는 화재가 발생한 전동차가 지하철 역사에 정차된 상황에서 승강장과 터널에 설치된 환기팬 작동 유무 및 전환 시간에 따른 열 및 연기 배출 특성 예측을 위하여 수치해석을 수행하였다. 환기팬 작동 방식에 따른 온도, 일산화탄소 및 가시거리 분포를 피난자의 호흡높이를 1.7m로 고려하여 비교 분석하였다. 수치해석 결과 터널 환기팬 작동으로 인하여 승강장 내의 열 및 연기가 신속히 터널부로 배출되었다. 또한 피난 진행 중에는 승강장 환기팬을 작동하고 피난이 완전히 완료된 후 터널에 설치된 환기팬을 작동하는 것이 효과적인 배연방법임을 확인할 수 있었다.

통신기지국용 하이브리드 냉방기의 성능특성 연구 (Performance Characteristics of a Hybrid Air-Conditioner for Telecommunication Equipment Rooms)

  • 김용찬;최종민;강훈;윤준상;김영배;최광민;이호성
    • 설비공학논문집
    • /
    • 제18권11호
    • /
    • pp.874-880
    • /
    • 2006
  • The power density and heat dissipation rate per unit area of the telecommunication equipment have been increased with the technology development in the footprint of telecommunication hardware. A proper heat dissipation method from the PCB module is very important to allow reliable operation of its electronic component. In this study, a hybrid air-conditioner for the telecommunication equipment room was designed to save energy and obtain system reliability. For high outdoor temperatures, the hybrid system operates in the vapor compression cycle, while, for low outdoor temperatures, the hybrid system works in the secondary fluid cooling cycle with no operation of the compressor. The performance of the hybrid air-conditioner was measured by varying outdoor and indoor temperatures. The hybrid air-conditioner yielded 50% energy saving compared with the conventional refrigeration system when the mode switch temperature was $8.3^{\circ}C$.

스마트 베이스 레이어 의복의 효과적인 발열모드 설정을 위한 사용자의 자율적 가열행동 연구 (User's Voluntary Heating Behavior for the Programming of the Efficient Heating Mode of Smart Base Layer Clothing)

  • 이희란;홍경희;이예진;김소영
    • 한국의류학회지
    • /
    • 제41권5호
    • /
    • pp.872-882
    • /
    • 2017
  • There are no specific guidelines on how to control the heat input for the heat generating smart base layer. This study investigated the mode of actuating heat pad attached to the base layer by performing a human wear test in a cold environment. Subjects participating in the test wore T-shirts, jumper and pants on the base layer with heating pads. Skin temperature, total time of heating and the number of switching for the heating mode were observed as the subject controlled the heating mode voluntarily. The comfortable range of skin temperature on the abdomen was larger than on the lower back. The subject felt hot and turned off the switch when the mean skin temperature of the abdomen was $48.8^{\circ}C$ and the lower back was $40.1^{\circ}C$. The total heating time and the number of actuating switching were larger for women than men. The voluntary action of heating for men with high cold sensitivity was significantly different from men with low cold sensitivity. Therefore, it is necessary (depending on gender and cold sensitivity) to set the heating mode differently for the automatic heat control of a future smart base layer.