• 열처리공학회지
• /
• 제2권1호
• /
• pp.70-74
• /
• 1989

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.419-426
• /
• 2011

In this study, an experimental and theoretical program were carried out to determine the cutting forces and chip formation at different cutting speeds using a 0.4mm nose radius ceramic insert and -7 rake angle for non heat-treated AISI 4140 (27HRc) and heat-treated AISI 4140 (45 HRc) steel. The results obtained were compared to show the hardness differences between the materials. The secondary deformation zone thicknesses when comparing the two materials show different physical structure but similar size. These results were also discussed in light of the heat treatment and the effects it had on the machining characteristics of the material. In addition, the Oxley Machining Theory was used to predict the cutting forces for these materials and a comparison made. The predicted cutting performances were verified experimentally and showed good agreement with experimental data.

• 산업융합연구
• /
• 제18권6호
• /
• pp.99-105
• /
• 2020

일반적으로 모발에 웨이브를 형성시키기 위해서 시술하는 퍼머넌트 웨이브 중에서도 가장 자연스럽고 탄력있는 웨이브를 얻기 위해서 열을 이용한 시술을 선호한다. 이에 본 연구는 퍼머넌트 웨이브 시술시 사용되는 로드의 열 형성도에 따라서 모발에 미치는 표면적인 모발의 손상도를 주사전자현미경을 활용하여 측정하였다. 로드의 열 형성이 웨이브에 미치는 영향력을 알아보기 위해 열 로드에서 전달되는 온도를 측정하고 웨이브를 시술하여 웨이브 된 둥근 모양의 형태대로 모발을 절단한 후 처치를 하였다. 주사전자현미경 관찰에서 뜨거운 열이 직접적으로 닿은 부분은 모발이 끊어진 것을 확인할 수 있었는데 끊어진 면이 매끄러운 현상을 보였다. 본 연구의 결과로는 퍼머넌트 웨이브시에 사용되는 열 로드는 열 전달이 로드 전체에 고르게 전달되는 특성을 가지고 있는 재질을 활용하고 로드의 구조 또한 중요함을 인식하고 미용 업계에서 활발한 연구가 이뤄져야 할 것으로 사료된다.

• 한국주조공학회지
• /
• 제20권3호
• /
• pp.173-180
• /
• 2000

The microstructure changes of the matrix and the graphites were observed by optical microscope and the average hardness number was investigated according to the heat-treatment conditions of the cast iron rods by the horizontal continuous casting process in 35 mm diameter. The three kinds of heat-treatments were introduced. The first treatment was performed at 900, 950, and $1000^{\circ}C$ for 2 hours and the second treatment was conducted during 5, 10, and 15 hours at $1000^{\circ}C$ respectively. The third treatments were the two-cyclic heat-treatment and the three-cyclic heat-treatment at $1000^{\circ}C$ during 2 hours. The matrix microstructure of the specimens to be treated at various temperatures for 2 hours was the ferrite to be transformed from the pearlite The hardness number of the center of the samples according to the heat treatment time at $1000^{\circ}C$ was higher than that of the surface area because of the martensite formation in the center. Also, in the cyclic heat-treatments, the hardness number of the two-cycle treatment specimens increased because of the martensite formation in the center.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1465-1472
• /
• 2009

완전혼합 반응기에서 외부로의 열손실이 $CH_4/air$예혼합화염의 NOx 생성특성에 미치는 영향을 수치해석으로 검토하였다. 주요 결과로서, 단열조건에서 NOx는 체류시간에 따라 급격히 증가하는 반면에, 열손실이 고려될 때 열전 달 상수와 체류시간의 증가에 따라 NOx 저감현상이 뚜렷하게 발생하였다. 민감도 해석을 통해 열손실율이 증가함에 따라 Thermal NO 기구와 Re-burning NO 기구는 NOx 저감에 크게 기여하는 반면, Prompt NO 기구와 $N_2O$-경유 NO 기구는 오히려 NOx 증가에 기여함을 확인하였다. NOx 생성기구는 열전달 상수 및 체류시간의 변화에 따라 매우 복합한 특성을 갖지만, NOx 농도는 독립된 Thermal NO 기구에 의해 표현될 수 있었다. 이를 통해 실용 $CH_4/air$예혼합 연소기에서 NOx 농도를 예측할 수 있는 열손실율과 체류시간을 조합한 새로운 NOx 상관식이 도출되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.42-46
• /
• 2017

The effects of the heat treatment temperature ($600^{\circ}C-1050^{\circ}C$) on the formation of $MgB_2$ and the superconducting properties have been examined. The self-synthesized $MgB_4$ and commercial Mg powders were used as raw materials for the formation of $MgB_2$. The superconducting critical temperatures ($T_cs$) of $MgB_2$ bulk superconductors prepared at $600^{\circ}C-850^{\circ}C$ were as high as 37-38 K regardless of the heat treatment temperature. However, because $MgB_4$ is more stable than $MgB_2$ at above $850^{\circ}C$, no superconducting signals were detected in the susceptibility-temperature curves of the samples prepared above $850^{\circ}C$. As for the critical current density ($J_c$), the sample heat-treated at a low temperature ($600^{\circ}C$) for a prolonged period (40 h) showed a Jc higher than those prepared at $650^{\circ}C-850^{\circ}C$ for a short period (1 h). The FWHM (full width at half maximum) result showed that the grain size of $MgB_2$ of the $600^{\circ}C$ sample was smaller than that of the other samples. The high $J_c$ of the $600^{\circ}C$sample is attributed to the presence of large numbers of grain boundaries, which can act as flux pinning centers of $MgB_2$.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.838-843
• /
• 2006

The chemical processes involved in the formation of green pigment in crushed garlic cloves were investigated based on the principle of pink pigmentation in macerated onions. Intact greening and non-greening garlic cloves were either left untreated or heated at $90^{\circ}C$ for 3 min to inactivate enzyme activities. First, a colorless ether soluble compound referred to as color developer reacted with glycine (among all free amino acids) in garlic to form a second compound insoluble in ether. The latter compound then reacted with formaldehyde to yield the green colored pigment. Alliinase activity was necessary for the production of color developer and for the development of green pigment. In greening garlic that had been heat treated, green pigmentation did not proceed due to the heat-inactivation of alliinase, but the addition of alliinase solution into the garlic homogenates restored the pigmentation. However, this phenomenon was not observed in non-greening garlic with or without heat treatment. Finally, the mechanism of green pigment formation in crushed garlicis similar to that of pink pigment formation in macerated onions.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.148-155
• /
• 1995

The object of this study is to achieve a gteater understanding of meterial removal process and its mechanism. In this study, some applications of finite element techniques are applied to analyze the chip formation and cutting heat generation mechanism of metal cutting. To know the effect of cutting parameters, simulations employed some independent cutting variables change, such as constitutive deformation laws of workpiece and tool material, frictional coefficients and tool-chip contact interfaces, cutting speed, tool rake angles, depth of cut and this simulations also include large elastic-plastic defor- mation, adiabetic thermal analysis. Under a usual plane strain assumption, quasi-static, thermal-mechanical coupling analysis generate detailed informations about chip formation process and cutting heat generation mechanism Some cutting parameters are affected to cutting force, plastic deformation of chip, shear plane angle, chip thickness and tool-chip contact length and reaction force on tool, cutting temperature and thermal behavior. Several aspects of the metal cutting process predicted by the finite element analysis provide information about tool shape design and optimal cutting conditions.

• Nuclear Engineering and Technology
• /
• 제41권7호
• /
• pp.929-944
• /
• 2009

The present study is concerned with the extension of the Effective Convectivity Model (ECM) to the phase-change problem to simulate the dynamics of the melt pool formation in a Light Water Reactor (LWR) lower plenum during hypothetical severe accident progression. The ECM uses heat transfer characteristic velocities to describe turbulent natural convection of a melt pool. The simple approach of the ECM method allows implementing different models of the characteristic velocity in a mushy zone for non-eutectic mixtures. The Phase-change ECM (PECM) was examined using three models of the characteristic velocities in a mushy zone and its performance was compared. The PECM was validated using a dual-tier approach, namely validations against existing experimental data (the SIMECO experiment) and validations against results obtained from Computational Fluid Dynamics (CFD) simulations. The results predicted by the PECM implementing the linear dependency of mushy-zone characteristic velocity on fluid fraction are well agreed with the experimental correlation and CFD simulation results. The PECM was applied to simulation of melt pool formation heat transfer in a Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR) lower plenum. The study suggests that the PECM is an adequate and effective tool to compute the dynamics of core melt pool formation.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.8-16
• /
• 2013

As the energy consumption increases rapidly, power generation needs the high energy efficiency continuously. To achieve the high efficiency of power generation, the materials used have to endure the higher temperature and pressure. The 9-12%Cr steels possess good mechanical properties, corrosion resistance, and creep strength in high temperature due to high Cr contents. Therefore, the 9-12%Cr steels are widely used for the high-temperature components in power plants. Even though the steels usually have a fully martensitic microstructure, they are susceptible to the formation of ${\delta}$-ferrite specifically during the welding process. The formation of ${\delta}$-ferrite has several detrimental effects on creep, ductility and toughness. Therefore, it is necessary to avoid its formation. As the volume fraction of ${\delta}$-ferrite is less than 2% in microstructure, it has the isolated island morphology and causes no significant degradation on mechanical properties. For ${\delta}$-ferrite above 2%, it has a polygonal shape affecting the detrimental influence on the mechanical properties. The formation of ${\delta}$-ferrite is affected by two factors: a chemical composition and a welding heat input. The most effective ways to get a fully martensite microstructure are to reduce the chromium equivalent less than 13.5, to keep the difference between the chromium and nickel equivalent less than 8, and to reduce the welding heat input.