• 한국자원식물학회지
• /
• 제13권3호
• /
• pp.208-212
• /
• 2000

보온 피복재 종류가 자옥 포도 유목의 월동시 동해방지, 노동력 절감 및 병해 발생 억제에 미치는 영향을 구명하기 위하여 11월 하순에 짚을 덮은 다음 보온덮개B, 킬딩, 칼라부직A 및 백색니들펀칭부직포 등을 피복하여 시험한 결과를 요약하면 다음과 같다. 1. 보온력은 백색니들펀칭부직포가 가장 불량하였고, 다른 보온재간에는 차이가 미미하였다. 2. 발아는 보온덮개B에서 빨리 시작되었으며, 발아 9일 후에도 발아율이 79.7%로 타 보온재 보다 2.3∼12.5% 높았다. 3. 생육은 보온재간에 차이가 없었으며, 병해 발생은 킬딩과 보온덮개B에서 뿌리혹병이 지수 3.0∼3.2로 다소 많이 발생되었을 뿐 기타 병해는 처리간에 차이가 없거나 미미 하였다. 4. 작업 단계별 소요노력은 보온덮개B에 비하여 킬딩은 6% 많았으나, 칼라부직A는 6%, 백색니들펀칭 부직포는 15%적었다.

• 대한한의학회지
• /
• 제40권3호
• /
• pp.112-138
• /
• 2019

Objectives: The purpose of this study is to organize the research methods and results of studies related to the temperature of the warm needle for systematic utilization of warm needling technique. Methods: This study used the databases of nine (Pubmed, Science Direct, Cochrane Central, 4 Korean databases, CNKI, CiNii) to analyze temperature-related studies of the warm needle from 2000 to June 2019. Results: A total of 19 papers were included. Of these, 15 were used for mugwort, 2 for high frequency, and 1 for both mugwort and high frequency, and the other one for a ceramic heater. The maximum temperature rises as the amount of moxibustion increases. It is also affected by the density of moxa and the ignition part. There were 16 papers using stainless steel needles and 4 papers using a needle made of gold or silver to compare. In the area of the needle, the closer it is to moxibustion, the hotter it is. Compared to stainless steel needles, gold and silver needles showed almost twice the temperature. The effects of environment and radiant heat should be considered during warm needle procedures. Conclusions: There are various experimental methods such as warm needle technique materials, methods, measuring parts, measuring instruments, etc. The results were also very diverse. When setting the heating source, ignition part, size of moxibustion, etc. of warm needles, it should be implemented in a way that takes safety and validity into account. Considerations for temperature characteristics, radiant heat, etc. of warm needles will be needed when making warm needle apparatus.

• 복식
• /
• 제11권
• /
• pp.51-60
• /
• 1987

The penetration force of needle and penetration energy kave been investigated, in order to research into the sewing factors that influence the weft knitted fabric with high elastic property. The results of the studies are a follows: (1) As the results have showed a high correlativity between the needle penetration energy and force, it proves that the dynamic energy produced by the friction of the needle as it penetrates and withdraws from the knitted fabric contributes to the heat growth of the needle. (2) To reduce frictional force the use of thin needles, medium ball point needle and super needle are effective. (3) The reduction in number of plies of fabric or also in the case of a decrease in penetration speed have been effective in lowering the penetration energy and force.

• 열처리공학회지
• /
• 제5권3호
• /
• pp.171-178
• /
• 1992

The effect of nozzle characterristics on the mist-cooling heat transfer was investigated under the various flow conditions. Two different types of twin fluid nozzle were used, one is a $90^{\circ}$ angle tip nozzle with needle and the other is a $90^{\circ}$ angle tip non-needle nozzle. The cooling rate from the heated surface was measured and obtained the boiling curve as a function of surface temperature. An immersion sampling was employed for the measurement of droplet size of the spray. As a result of this experiment, the liquid sheet type nozzle shows better atomization when the mass ratio Mr>2.0, and collects more liquid droplets on the heated surface that results in better cooling effect. It was found that the maximum heat flux and heat transfer coefficient increased with increase in the volumetric flow rate, whereas the maximum heat flux decreased with increase in spray distance. The cooling effect depends upon the amount of collected droplet and droplet size, but it strongly depends upon the amount of collected droplet.

• 대한한의진단학회지
• /
• 제19권2호
• /
• pp.101-108
• /
• 2015

Objectives This paper focused on developing the acupuncture-moxibustion device for head. Disadvantages of the existing devices for head moxibustion are its hume and inconvenience in operating because of the hair. Methods The proposed acupuncture-moxibustion device for GV20(Baihui) is 10mm long as needle body and 6mm long as needle root whose feature are 1~2 turns spiral coil. The spiral coil contains the moxa in order not to drop the moxa while operating Results The direct temperature on the burning moxa were measured by TK-305 infrared thermometer. But the direct temperature on the needle of acupuncture-moxibustion device were not able to measure by TK-305 infrared thermometer. By definition equation, the indirect temperatures on the needle of acupuncture-moxibustion device were able to be calculated. Conclusion A very safe, small and cheap acupuncture-moxibustion device for GV20(Baihui) of head is proposed. It will be useful to generate the heat shock protein and to operate in preventing and curing the Alzheimer's disease.

• Journal of Acupuncture Research
• /
• 제28권5호
• /
• pp.65-76
• /
• 2011

Objectives : Study about needle retaining time. Methods : We reviewed the ancient and the present text of China with using the China academic journal(CAJ) of China national knowledge infrastructure(CNKI) Results & Conclusions : 1. Needle retaining time is important in acupuncture, because the therapy effect is influenced by it. 2. The time of needle retaining is up to those conditions like different disease, viscera and bowels(臟腑), meridian and collateral(經絡), obtaining Qi(得氣), seasons, constitution of the patients and acupuncture tools. In ${\ll}$Hwangdineijing(黃帝內經) ${\gg}$, needle retaining time is called by 'Zhiruzhichu(直入直出)', 'Jichu(疾出)', 'Liu(留)', 'Buliu(不留)', 'Jiuliu(久留)' and 'Liu ${\bigcirc}$ hu(留${\bigcirc}$呼)', and the time was shorter than nowadays. 3. The respiration number was counted to check needle retaining time but we can't find out any evidence. Recently in China, 'obtaining Qi(得氣)' and 'Qi arrival(氣至)' is used to check it. 4. Looking into clinical researches, different diseases need different needle retaining time. For example, 20~30min is appropriate time for musculoskeletal system. 60min is for circulatory system, 10~20min is for peripheral facial nerve paralysis. Insomnia and some stubborn diseases need longer time. Cold and heat(寒熱), deficiency and excess(虛實) are always influences the needle retaining as well. 5. It is important to figure out the most effective needle retaining time for different disease with the base of connection between needle retaining time and effect.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.7.1-7.1
• /
• 2009

The use of Duplex stainless steel as a thermo-implant categorizes into two clinical applications: hyperthermia and thermal ablation or destruction. The goal of hyperthermia is to destroy the heat-sensitive abnormal cells and minimize normal cell death maintaining heat between $42^{\circ}C$ and $46^{\circ}C$. Thermal ablation takes place when the local tissue temperature increases greater than $46^{\circ}C$. This elevated temperature denatures protein irreversibly resulting cellular death. The author introduced several thermo-implants such as thermo-rod, thermo-stent, thermo-coil and thermoacupuncture-needle. Those thermo-implants are made of duplex stainless steel which can produce regulated heat by itself within an induction magnetic field. Thermal ablation characteristics of the thermo-rod on tumor hyperthermia depend on configurations of the thermo-rods and the magnitude of the induction magnetic strength. The exothermic properties of the thermo-implants can be characterized using the calorimetric test and the heat affected zone(HAZ) analyses in vitro. Thermal radiation studies using thermo-coils and thermo-stents show the capability of the occlusion of animal blood vessels and inhibiting the proliferation of the abnormal smooth muscle cell growth and inflammatory cell reactions maintaining the heat between $42^{\circ}C$ and $46^{\circ}C$ minimizing a normal cell death in the study on external iliac artery of the New Zealand White (NZW) rabbit. Thermal stimulation study using thermo-acupuncture needles suggests the potential applications of the automated acupunctural therapies.

• Journal of Acupuncture Research
• /
• 제20권1호
• /
• pp.85-96
• /
• 2003

Objectives : We were studied the retaining needle to offer basic materials for the study of it. methods: To study the retaining needle, we were reviewed the ancient, the present text and the thesis. Results: 1. There are many ways form general acupuncture technique to needle-embedding therapy by the spending time of the retaining needle. 2. The method retaining needle is divided into Active method of the retaining needle(動留針法) and Passive methoid of the retaining needle(靜留針法) by the existence of Qi-promoting. 3. In case of Deficiency Syndrome, protracted discase, dolorific disorder, convulsive disorder, and Cold Syndrome, the spending time of the retaining needle takes longer, in case of Heat Syndrome and exterior Syndrome, the spending time of the retaining needle takes shorter. 4. In case of acute disease and attack of chronic disease, we can use Active methoid of the retaining needle(動留鍼法) with retaining needle for a long time, in case of chronic disease, we can use Passive methoid of the retaining needle(靜留針法). 5. In case of Young people, a man in the prime of life, and a people who can stand the stimulation of needle, we can make the spending time of the retaining needle be longer and use Active methoid of the retaining needle(動留針法), but in case of a baby and a weak people, we had better shorten the spending time of the retaining needle or not do it. 6. The spending time of the retaining needle must be shorter in spring and summer, must be longer in fall and winter. 7. The spending time of the retaining needle is various by acupuncture point. 8. When the spending time of the retaining needle is too longer, we can injure Vital-qi of a patient, otherwise in opposite situation, Pathogenic is stagnated so pathogenic stage is repeated.

• 생명과학회지
• /
• 제16권5호
• /
• pp.866-869
• /
• 2006

감자 polyphenol oxidase에 대한 솔잎 추출물의 저해효과가 조사 되었다. 솔잎 추출물은 anti-browning agents인 potassium sorbate나 citric acid보다도 더 강한 저해효과 를 나타냈으며 pH 7.0-8.0 사이에서 가장 강력한 저해효과가 있음을 알 수 있었다. 또한 반응시간이 증가 할수록 감자 polyphenol oxidase 활성은 현저하게 저해 되었으며 솔잎 추출물은 감자 polyphenol oxidase에 대해 비경쟁적인 저해를 하는 것으로 나타났다. 솔잎 추출물은 $100^{\circ}C$ 에서 10분간 열처리시에도 안정 하였으며 pH 2.0, 3.0, 4.0에서 3시간 처리시에도 여전히 감자 polyphenol oxidase 에 대한 저해효과를 보유하고 있어서 산과, 열에 비교적 안정한 물질임을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.502-507
• /
• 2007

The oxidation treatment of several carbon materials with a sodium chlorate and 70 wt.% of nitric acid, combined with heat treatment, were attempted to achieve an electrochemical active material with a larger capacitance. Among pitch, needle coke, calcinated needle coke and natural graphite, the structure of needle coke and calacinated needle coke were changed to the graphite oxide structure with the expansion of the inter-layer. On the other hand, the calcinated needle coke after oxidation and heating at $200^{\circ}C$ has exhibited largest capacitance per weight and volume of 29.5 F/g and 24.5 F/ml at the two-electrode system in the potential range of 0 to 2.5 V. The electrochemical performance of the calcinated needle coke was discussed with the phenomenon of the electric field activation and the formation of new pores between the expanded inter-layer at first charge.