• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.605-613
• /
• 2009

In this paper, we studied for the real-time azimuthal measurement of HMD (Head Mounted Display) to control the tele-operated vision system on the mobile robot. In the preexistence tele-operated vision system, a joystick was used to control the pan-tilt unit of the remote camera system. To give the sense of presence to the tele-operator, we used a HMD to display the remote scene, measured the rotation angle of the HMD on a real time basis, and transmitted the measured rotation angles to the mobile robot controller to synchronize the pan-tilt angles of remote camera with the HMD. In this paper, we suggest an algorithm for the real-time estimation of the HMD rotation angles using feature points extraction from pc-camera image. The simple experiment is conducted to demonstrate the feasibility.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.360-362
• /
• 2009

In this paper, we studied for the real-time azimuthal measurement of HMD(Head Mounted Display) using the feature points detection to control the tele-operated vision system on the mobile robot. To give the sense of presence to the tele-operator, we used a HMD to display the remote scene, measured the rotation angle of the HMD on a real time basis, and transmitted the measured rotation angles to the mobile robot controller to synchronize the pan-tilt angles of remote camera with the HMD. In this paper, we suggest an algorithm for the real-time estimation of the HMD rotation angles using feature points extraction from pc-camera image.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.578-588
• /
• 2005

Face robots capable of expressing their emotional status, can be adopted as an efficient tool for friendly communication between the human and the machine. In this paper, we present a face robot actuated with artificial muscle based on dielectric elastomer. By exploiting the properties of dielectric elastomer, it is possible to actuate the covering skin, eyes as well as provide human-like expressivity without employing complicated mechanisms. The robot is driven by seven actuator modules such eye, eyebrow, eyelid, brow, cheek, jaw and neck module corresponding to movements of facial muscles. Although they are only part of the whole set of facial motions, our approach is sufficient to generate six fundamental facial expressions such as surprise, fear, angry, disgust, sadness, and happiness. In the robot, each module communicates with the others via CAN communication protocol and according to the desired emotional expressions, the facial motions are generated by combining the motions of each actuator module. A prototype of the robot has been developed and several experiments have been conducted to validate its feasibility.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.6
• /
• pp.258-266
• /
• 2002

This paper proposes the methodology of the image processing algorithm that estimates the pose of the inner-pipe crawling robot. The inner-pipe crawling robot is usually equipped with a lighting device and a camera on its head for monitoring and inspection purpose of defects on the pipe wall and/or the maintenance operation. The proposed methodology is using these devices without introducing the extra sensors and is based on the fact that the position and the intensity of the reflected light from the inner wall of the pipe vary with the robot posture and the camera. The proposed algorithm is divided into two parts, estimating the translation and rotation angle of the camera, followed by the actual pose estimation of the robot . Based on the fact that the vanishing point of the reflected light moves into the opposite direction from the camera rotation, the camera rotation angle can be estimated. And, based on the fact that the most bright parts of the reflected light moves into the same direction with the camera translation, the camera position most bright parts of the reflected light moves into the same direction with the camera translation, the camera position can be obtained. To investigate the performance of the algorithm, the algorithm is applied to a sewage maintenance robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2012

Mobility is one of the most important issues for search and rescue robots. To increase mobility for small size robot we have focused on the mechanism and algorithm inspired from centipede. In spite of small size, using many legs and flexible long body, centipede can overcome high obstacles and move in rough terrains stably. This research focused on those points and imitated their legs and body that are good for obstacle negotiation. Based on similarity of a centipede's legs and tracks, serially connected tracks are used for climbing obstacles higher than the robot's height. And a centipede perceives environments using antennae on its head instead of eyes. Inspired from that, 3 IR sensors are attached on the front, top and bottom of the first module to imitate the antenna. Using the information gotten from the sensors, the robot decides next behavior automatically. In experiments, the robot can climb up to 45 cm height vertical wall and it is 600 % of the robot's height and 58 % of the robot's length.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.563-569
• /
• 2012

In the semiconductor and display device production processes, the handling of sensitive objects needs new carrying technology. Floating carrying motion is a practical alternative solution for non-contact handling of parts and substrates. This paper presents a study of through paths inside the air pressure pick-up head to generate the floating motion. The air motion by conceptual designed paths inside the head gradually develops positive pressure and vacuum between narrow objects. Positive pressure occurs through the head tip before discharging outside of the head. Negative pressure is developed by evacuating the inside head bottom as result of the radial flow connecting the vertical through-holes. The numerical analysis was done to figure out the stable levitation caused by the two acting forces between surfaces. In comparing with the standard case that the levitation gap gets 0.7-0.9 mm, it confirms the suggested head characteristics to show floating capacity in accordance with the head size, number of through-hole, and locations of through-hole in succession of conceptual design for a prototype.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.674-680
• /
• 2010

It is known that many insects and animals can return to their nest after exploration, with their own specific homing mechanisms. Their homing navigation methods have been applied to the robotic navigation. In this paper, we test the sector-based image matching method motivated by the honeybee's landmark navigation behaviour. Here, our robotic approach uses the reference compass to identify the current head direction and the relative angular position of landmarks for the navigation. The robot shows desirable homing behaviors if the robot is surrounded by landmarks. The result of robot experiment is in good agreement with that of simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.751-755
• /
• 2005

We propose a sound source localization method using the Head-Related-Transfer-Function (HRTF) to be implemented in a robot platform. In conventional localization methods, the location of a sound source is estimated from the time delays of wave fronts arriving in each microphone standing in an array formation in free-field. In case of a human head this corresponds to Interaural-Time-Delay (ITD) which is simply the time delay of incoming sound waves between the two ears. Although ITD is an excellent sound cue in stimulating a lateral perception on the horizontal plane, confusion is often raised when tracking the sound location from ITD alone because each sound source and its mirror image about the interaural axis share the same ITD. On the other hand, HRTFs associated with a dummy head microphone system or a robot platform with several microphones contain not only the information regarding proper time delays but also phase and magnitude distortions due to diffraction and scattering by the shading object such as the head and body of the platform. As a result, a set of HRTFs for any given platform provides a substantial amount of information as to the whereabouts of the source once proper analysis can be performed. In this study, we introduce new phase and magnitude criteria to be satisfied by a set of output signals from the microphones in order to find the sound source location in accordance with the HRTF database empirically obtained in an anechoic chamber with the given platform. The suggested method is verified through an experiment in a household environment and compared against the conventional method in performance.

• International Journal of Safety
• /
• v.5 no.2
• /
• pp.12-17
• /
• 2006

Operations of human-centered robot, in general, facilitates the creation of new process that may potentially harm the human operators. Design of safety-guaranteed operation of human-centered robots is, therefore, important since it determines the ultimate outcomes of operations involving safety of human operators. This study discusses the application of information-theoretic measures to safety assessment of human-centered robotic operations. Some examples are given.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.2
• /
• pp.98-106
• /
• 2020

Conventional method of PHC pile head cutting work has several challenges with regard to safety, convenience, productivity, and quality. To address such problems, a prototype of the all-in-one attachment-based PHC pile cutting robot is developed(Yeom, 2018). The Primary objective of this study are to develop a final prototype of all-in-one attachment-based PHC pile cutting robot and to analyze technical feasibility and field applicability of final prototype. According to the technical feasibility and field applicability analysis result, at least 74.2% of the respondents are selected positive answer about technical feasibility of the final prototype, at least 66.6% of the respondents are selected positive answer about field applicability of the final prototype. It is expected that when deployed onsite, the final prototype can not only increase the practical use but also improvement the work safety and productivity of work at the PHC pile head cutting job site.