• Development and Reproduction
• /
• v.15 no.2
• /
• pp.121-131
• /
• 2011

The aim of this study was to investigate the egg development and the color change of Amphiprion melanopus, by the live food and thyroid hormone. After fertilizing, it took 168 h until hatching. The size of hatching larvae were $3.5{\pm}0.3$ mm, and some individuals had small yolk sac. As reaching the particular age, they underwent the color change (metamorphosis) - Days after hatching (DAH) 10: black, DAH 15~20: the 3 white stripes appear, DAH 30: the dorsal & the caudal white stripe begin to disappear. DAH 90: body color become red and orange, adult: cinnamon body color and a white stripe on head. - The group fed enriched Artemia with Tigriopus japonicus grew the faster than with only Artemia. The fin coloration of the one fed the only T. japonicus has a vivid red and orange color. $T_3$-treated group (4 ppm) grew the faster than the others (0, 2, 6 ppm). The size of the 6 ppm group was the smallest. The results suggest T. japonicus can be used as a supplement with rotifer and Artemia for the juvenile development and coloration. $T_3$ is considered to be involved in the metamorphosis and color formation of Amphipirion sp.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.225-230
• /
• 2012

Interferon induced transmembrane protein-1 (Ifitm-1) has been reported to have an important role in primordial germ cell formation, and it has expressed in female reproductive organ. In the present study, Ifitm-1 gene expression was identified in testes and all part of epididymis using western immunoblot and immunohistochemistry. Interestingly, Ifitm-1 expression was observed on the head of spermatozoa. To investigate the role of Ifitm-1 gene expression in behavior of spermatozoa after acrosome reaction, fresh sperm was incubated with calcium ionophore to induce acrosome reaction, whereas the expression of Ifitm-1 was not altered after the acrosome reaction. Then to identify the effect of Ifitm-1 in sperm motility and other seminal parameters, different concentration of Ifitm-1 antibody was incubated with spermatozoa, and seminal parameters were assessed using computer-assisted semen analysis (CASA). Interestingly, motility, progressive, and VAP were increased in the sperm with Ifitm-1 antibody treated compared to rabbit serum, however other parameters such as straightness were not changed. In order to identify the functional significance of Ifitm-1 in fertilization, capacitated spermatozoa were pre-incubated with anti-Ifitm-1 antibody and subsequently examined the ability to adhere to mouse oocytes. However, any defection or alteration in sperm-egg fusion was not found, Ifitm-1 antibody treated or non-treated spermatozoa showed a normal penetration. Although the precise role of Ifitm-1 in sperm motility and following fertilization need to be elucidated, this study suggests that the activation of Ifitm-1 on the sperm may enhance the motility of spermatozoa in mice.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.180-184
• /
• 2005

This study was peformed to assess environmental effect through rice culture with sewage irrigation using Iksan stream water from 2002 to 2003. Contents of $NH_4-N$ in irrigation water keep up one day at the tillering stage and panicle formation stage were decreased 40% and 52% respectively, but that of continued 4 days was decreased $88%{\sim}98%$. The $NH_4-N\;and\;NO_3-N$ in run off by reduction 50% fertilization were more decreased 17% and 44% respectively, than those of conventional fertilization level. Amount of K and $NO_3-N$ loss in infiltration water were more decreased 18% and 4% respectively, those of than conventional fertilization level. The Cu and Pb contents in soil of after experiment were slightly increased but other heavy metals were not accumulated. The rice yield by reduction 50% fertilization level was not significant compare with conventional fertilization level but head rice rate was increased.

• 대한공업교육학회지
• /
• v.42 no.2
• /
• pp.20-46
• /
• 2017

The purposes of this study are to derive supportive measures for the effective operation of vocational education and training high schools participating in the apprenticeship system (apprenticeship schools) and make policy suggestions by analyzing the need analysis and investigating the importance and the difficulty of teachers regarding the operation of those schools. To achieve these purposes, the study developed a questionnaire by deriving the areas and items for the operation of apprenticeship schools, and analyzed 121 completed questionnaires of head and senior teachers who manage the apprenticeship programs across the nation after conducting a survey. The findings of this study can be summarized as follows: First, the teachers of apprenticeship schools found all the operation areas of the schools are important but difficult. Out of the operation areas, teachers had relatively high needs for 'promotion, selection and management of enterprises', 'student management', 'development of apprenticeship programs, formation of the curriculum, and establishment of operation plans of the curriculum'. Second, the teachers found all the detailed items of the operation areas of apprenticeship schools are important but difficult generally. According to the results, it is required to relax the criteria for forming apprenticeship organizations; operate the local government-oriented apprenticeship system; establish information systems between schools and enterprises; improve the support methods of relevant agencies; and increase incentives of teachers who are in charge of apprenticeship programs. It is also necessary to operate exclusive agencies supporting for OJT; operate apprenticeship education centers of local small and medium-sized business associations; provide exclusive supervision of students; cultivate teachers who support industry-academia cooperation; and legislate on the NCS-based qualifications.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.343-353
• /
• 2017

Processing and equipment were tailored for engineering scale fabrication of $UO_2$ porous pellets, a feed material for the electrolytic reduction process in the PRIDE (PyRoprocessing Integrated DEmonstration) facility at KAERI (Korea Atomic Energy Research Institute). The starting materials, $UO_2$ powder and pre-milled surrogate oxide powders, were proportioned to simulate the chemical composition of spent fuel (so-called Simfuel). The Simfuel powders were homogenized by mixing, compacted into a pellet shape, and finally heat treated using a tumbling mixer, rotary press, and sintering furnace. After sintering at $1450^{\circ}C$ for 24 h in $4%\;H_2-Ar$, the average bulk density of the $UO_2$ Simfuel pellets was $6.89g{\cdot}cm^{-3}$, which meets the standard of the following electrolytic reduction process. In addition, the results of a microstructural analysis demonstrated that the sintered Simfuel $UO_2$ porous pellets accurately simulate the properties of spent fuel in terms of the formation of second phases. These results provide essential information for the massive fabrication of $UO_2$ porous pellets for engineering scale pyroprocessing research.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.259-264
• /
• 2002

In order to develope nutritional and flavoring intermediate products, the optimal processing conditions for two stage enzyme hydrolysate (TSEH) from low-utilized conger eel scrap such as head and intestine were investigated. The optimal processing conditions for TSEH were revealed in temperature at $55^{\circ}C$ 3$\~$4 hours digestion with alcalase at the 1st stage, and 4 hours at $45{\~}50^{\circ}C$ digestion with neutrase at the 2nd stage. Among water extract, steam extract and enzyme hydrolysates of conger eel scrap, the present TSEH was superior to other extracts in terms of yield ana organoleptic taste such as harmonic umami and inhibition of fishy and greasy taste formation. From the results of chemical experiments and sensory evaluation, we may conclude that TSEH of conger eel scrap could be utilized as the flavoring intermediate materials for the fisheries products such as flavoring sauces, drinkable beverage and instant food materials.

• Archives of Pharmacal Research
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1997

We determined the microviscosity of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine cerebral cortex and liposomes of total lipids (SPMTL) and phospholipids (SPMPL) extracted from SPMV. Changes in the microviscosity induced by the range and rate of lateral diffusion were measured by the intramolecular excimerization of 1, 3-di(1-pyrenyl)propane (Py-3-Py). The microviscosity values of the direct probe environment in SPMV, SPMTL and SPMPL were 38.17, 31.11 and 27.64 cP, respectively, at$37^{\circ}C$and the activation energies $(E_a)$ of the excimer formation of Py-3-Py in SPMV, SPMTL and SPMPL were 8.236, 7.448 amd 7.025 kcal/mol, respectively. Probe location was measured by polarity and polarizability parameters of the probe Py-3-Py and probe analogues, pyrene, 1-pyrenenonanol and 1-pyrenemethyl-3${\beta}$-hydroxy-22, 23-bisnor-5-cholenate (PMC), incorporated into membranes or solubilized in reference solvents. There existed a good linear relationship between the first absorption peak of the $^1_a$ band and the polarizability parameter $(n^{2}-1)/(2n^{2}+1)$.The calculated refractive index values for SPMV, SPMTL and SPMPL were close to 1.50, which is higher than that of liquid paraffin (n=l.475). The probe location was also determined by using a polarity parameter $(f-1/2f^{I})$. Here f=$({\varepsilon}-1)/(2{\varepsilon}+1)$ is the dielectric constant function and $f^I=(n^2-1)/(2n^2+1)$ is the refractive index function. A correlation existed between the monomer fluorescence intensity ratio and the solvent polarity parameter. The probes incorporated in SPMV, SPMTL, and SPMPL report a polarity value close to that of 1-hexanol $({\varepsilon}=13.29)$. In conclusion, Py-3-Py is located completely inside the membrane, not in the very hydrophobic core, but displaced toward the polar head groups of phospholipid molecules, e.g., central methylene region of aliphatic chains of phospholipid molecules.

• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.36-45
• /
• 2016

Sand filters are widely used in infiltration systems to manage polluted urban runoff. Clogging, which is mainly caused by the deposition of sediments on the filter media, reduces the filter system's infiltration capacity, which further limits its lifespan and function. The physical, chemical and biological clogging characteristics of sand filter, therefore, need to be known for effective design and maintenance. Physical clogging behavior and variations in the characteristics of sand filters according to different media depths are examined in this paper. The variations were observed from laboratory column infiltration tests conducted in a vertical flow and fluctuating head condition. It can be seen that an increase in filter media depth results in a high sediment removal performance; however, it leads to a shorter lifespan due to clogging. In the choice of filter media depth to be used in field applications, therefore, the purpose of facilities as well as maintenance costs need to be considered. At all filter media depth configurations, premature clogging occurred because sediments of 100~250 μm clogged the top 15% of filter media depth. Thus, scrapping the top 15% of filter media may be suggested as the first operational maintenance process for the infiltration system.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.6
• /
• pp.5-17
• /
• 2013

Slug tests can be adopted to estimate hydraulic conductivity of the slurry trench wall backfill for its abilities to reflect the in-situ performance of the construction. A comprehensive three-dimensional numerical model is developed to simulate the slug test in a slurry trench wall considering the presence of bentonite cake on the interface boundaries between the wall and the surrounding soil formation. Influential factors such as wall width (i.e., proximity of wall boundary), well deviation, vertical position of well intake section, compressibility of wall backfill, etc. are taken into account in the model. A series of simulation results are examined to evaluate the bentonite cake effect in analyzing practical slug test results in the slurry trench wall. The results show that the modified line-fitting method can be used without any correction factor for the slug test in the slurry trench wall with the presence of bentonite cake. A case study is reanalyzed with the assumption of existing bentonite cake. The results are compared with the previously reported results by the approaches assuming no bentonite cake (constant-head boundary) or upper-bound solution (no-flux boundary). The case study demonstrates the bentonite cake effect and the validity of the modified line-fitting method in the estimation of the hydraulic conductivity of the slurry wall backfill.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.453-460
• /
• 2004

To prevent penetration of rainwater into the landfill site is the main purpose of the final cover in landfill sites. Conventional designs of landfill covers uses geotextiles such as geomembrane and GCL, and clay liners to lower the permeability of final covers of landfill sites. However, differential settlement and the variation of temperature in landfill sites cause the development of cracks or structural damage inside the final cover and it is also difficult to obtain clay - the main material of the compacted clay liner in Korea. Thus the former final cover system that suggests geomembrane and GCL or compacted clay liner has several limitations. Therefore, an alternative method is necessary and one of them is the application of SRSL(self-Recovering Sustainable Liner) material. SRSL is two different layers consist of individual materials that react with each other and form precipitates, and with this process lowers the permeability of the landfill final cover. SRSL generally is made up of two layers, so that when a internal crack occurs the reactants of the two layers migrate towards the crack and heal it by forming another liner. In this study the applicability of SRSL material for landfill final cover was examined by performing; (1) jar test to verify the formation of precipitate in the mixture of each reactants, (2) falling head test considering the field stress in order to confirm the decrease of permeability or prove that the hydraulic condctivity is lower than the regulations, (3) compression tests to judge weather if the strength satisfies the restricts for landfills, (4) freeze/thaw test to check the applicability of SRSL for domestic climate. In addition, the application of waste materials in the environmental and economical aspect was inspected, and finally the possibility of secondary contamination due to the waste materials was examined by performing elution tests.