• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.170-175
• /
• 2005

This study presents a prediction of a failure rate in a safety required system that consists of a embedded control system, requiring a satisfaction of a quantitative safety requirement. International Standards are employed to achieve a regular procedures in the whole life cycle of a system, for the purpose of a prediction and a evaluation of a fault that might be able to be happened in a system. This International Standards uses SIL (Safety Integrity Level) to evaluate a safety level of a system. SIL is divided into 4 levels, from level 1 to level 4, and each level has functional failure rate and dangerous failure rate of a system. In this paper we describe the conventional method to predict the dangerous failure rate and propose a method using hazard analysis to predict the dangerous failure rate. The conventional method and the technique using hazard analysis to predict the dangerous failure rate are made a comparison through the control modules of the interlocking system in KTX. The proposed method verify better effectiveness for the prediction of the dangerous failure rate than that of the conventional method.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.533-538
• /
• 2005

In this paper we identity the hazard using HAZOP study for ATSRX which is a subsystem of the ATP system, and we study a safety management method for the mitigation of the risk to the acceptable level. ATSRX is a device that make a train which has a ATP system operate in ATS line. For this ATSRX send a induction signal with ATS system to vehicle controller. Thus ATSRX can be said a safety equipment that makes a train operate safely. In order to identify the hazard for the internal faults in ATSRX system, we employ HAZOP study method which is recommended as hazard identification in IEC 62278, RAMS requirements in railway signal, and also it provide the detail activity in IEC 61882. Thus, in this paper we perform HAZOP study based on ATSRX related standards and using the assessment of the identified hazard we study a method to guarantee the system safety through the change of the design to mitigate the risk to the acceptable level.

• Fire Science and Engineering
• /
• v.14 no.4
• /
• pp.7-16
• /
• 2000

In the study, three criteria(toxicity, fire & explosion, environment) and damage prediction method for each case was set up, and all these criteria were applied to the subject substance that was selected as hazardous level by integrating all criteria through Algorithm. Particularly, the environment criterion is a comprehensive concept, environment index modeling by combining USCG(United State Coast Guard) & MSDS(Material Safety Data Sheet) environment criteria classifications and the environment part of MFPA's health hazardousnes(Nh). And for damage prediction method of each criterion were adopted and they were applied to hazardous chemical substances in use or stored by chemical substance related enterprises located in each region that made possible to set up total hazard level of used substances(inflammability, poisonousness and counteraction on a unit substance, and hazard level & display modeling on environment) & damage prediction in case of accident & solidity setup(CPQRA: Chemical Process Quantitative Risk Assessment, IAEA: International Atomic Energy Agency, VZ eq: Vulnerable Zone) risk counter. Thus it is deemed that it can be applied to toxic substance leakage that can happen during any chemical processing & storage, application as a tool for prior safety evaluation through potential dangerousness computation of fire & explosion.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.5 no.2
• /
• pp.94-98
• /
• 1987

Multi-Valued(MV) sequential logic circuits are proposed which are free from HAZARD. In this paper, HAZARD is classified Function and Logic HAZARD, and MV switching function in which they are eliminated is described. Also, the basic MV memory elements which can be realized without HAZARD are presented, so that suggest the realizability in the large-scale MV logic system based on these elements.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.53
• /
• pp.79-88
• /
• 1999

This paper presents an integral model for product safety and product liability resulting from a defective product. The essence of the paper is the process of supply of manufacturing products which satisfy the product liability and the product safety in terms of consumers expectation levels. The main criteria of the product safety is the hazard level which involves in the severity and frequency. The proposed model shows the process to supply the manufactured products under the conditions that they are suitable in comparison of hazard level and safety level established by each company. If the product do not meet the safety level, this paper proposes that four different types of PL and PS countermeasures for the risk types are forward, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1294-1301
• /
• 2010

In this study, a case study, where a hazard management for tunnel collapses has been quantitatively undertaken based on the KICT Tunnel Hazard(KTH) index, is presented. From this, it was able to timely inform the field engineers when the more detailed investigation is required for checking if any risky factor is shown on the tunnel face. At the same time, variable additional information such as sensitivities of major influence factors are also provided to field engineers from the methodology given in this study. The additional information would be helpful for better understanding of tunnel hazard level at the current tunnelling stage and following the required actions for more detailed checks of risky factors.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.373-385
• /
• 2009

A new indexing methodology so called KTH-index was developed to quantitatively evaluate a potential level for tunnel collapse hazard, which has been successfully applied to tunnel construction sites to date. In this study, an attempt is made to apply this methodology for validating an outcome of tunnel design by checking the variation of KTH-index along longitudinal tunnel section. In this KTH-index simulation, it is the most important to determine the input factors reasonably. The design factor and construction condition are set up based on the designed outcome. Uncertain ground conditions are arranged based on borehole test and electro-resistivity survey data. Two scenarios for ground conditions, best and worst scenarios, are set up. From this simulation, it is shown that this methodology could be successfully applied for providing quantitative validity of a tunnel design and also potential hazard factors which should be carefully monitored in construction stage. The hazard factors would affect sensitively the hazard level of the tunnel site under consideration.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.1
• /
• pp.57-63
• /
• 2011

In this study, a ground motion response spectrum for the seismic risk assessment of low and intermediate level radioactive waste repositories was developed. For the development of the ground motion response spectrum, a probabilistic seismic hazard analysis (PSHA) was performed. Through the performance of a PSHA, a seismic hazard curve which was based on a seismic bed rock was developed. A uniform hazard spectrum was determined by using a developed seismic hazard curve. Artificial seismic motions were developed based on the uniform hazard spectrum. A seismic response analysis was performed on the developed artificial seismic motion. Finally, an evaluation response spectrum for the seismic risk assessment analysis of low and intermediate level radioactive waste repositories was developed.

• Human Ecology Research
• /
• v.54 no.1
• /
• pp.69-81
• /
• 2016

Consumer anxiety about food safety is increasing, and the ability to make an accurate assessment is inadequate due to the lack of food safety information. This research focuses on relations among main variables, such as food hazard awareness, food apprehension, food safety information awareness, and food safety management system evaluation. In addition, to the moderating effects of food safety information awareness between food hazards awareness, food apprehension, and food safety management system evaluation. First, food hazards awareness and apprehension was slightly higher than the average level, also there was a significant difference in food hazard apprehension according to food hazard awareness. However, the level of food safety information was not high, meaning consumers were not as well informed as expected. We divided food safety management system evaluation into awareness and practice, subsequently, the results of both were at a low level. Food safety information awareness' moderating effect was also confirmed. Consumer organizations and the government need to provide specific and correct information to Korean consumers, that also implement a wide range of consumer education related policies.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.6
• /
• pp.265-271
• /
• 2015

The tsunami hazard analysis is performed for testing the application of probabilistic tsunami hazard analysis to nuclear power plant sites in the Korean Peninsula. Tsunami hazard analysis is based on the seismic hazard analysis. Probabilistic method is adopted for considering the uncertainties caused by insufficient information of tsunamigenic fault sources. Logic tree approach is used. Uljin nuclear power plant (NPP) site is selected for this study. The tsunamigenic fault sources in the western part of Japan (East Sea) are used for this study because those are well known fault sources in the East Sea and had several records of tsunami hazards. We have performed numerical simulations of tsunami propagation for those fault sources in the previous study. Therefore we use the wave parameters obtained from the previous study. We follow the method of probabilistic tsunami hazard analysis (PTHA) suggested by the atomic energy society of Japan (AESJ). Annual exceedance probabilities for wave height level are calculated for the site by using the information about the recurrence interval, the magnitude range, the wave parameters, the truncation of lognormal distribution of wave height, and the deviation based on the difference between simulation and record. Effects of each parameters on tsunami hazard are tested by the sensitivity analysis, which shows that the recurrence interval and the deviation dominantly affects the annual exceedance probability and the wave heigh level, respectively.