• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.2
• /
• pp.103-113
• /
• 2024

The effect of harvesting time on the growth, marketable tuber yield, and tuber quality of spring potato (Solanum tuberosum L. cv. Dami) were analyzed in the southern paddy fields in order to determine the optimal harvesting time. At 30-50 days after flowering, the total and marketable tuber yields of spring potato reached their maxima and commercial tuber rate was also high. External defects such as tuber malformation or crack did not occur until 40 days after flowering, but after that, secondary growth such as shooting appeared. Among the nutrient compositions of tubers, carbohydrate content accounted for more than 60% of tuber dry weight without significant difference among harvesting times until 50 days after flowering. The crude protein content decreased slightly as the harvesting time was delayed. However, the mineral nutrient content of tubers decreased with delaying harvesting time and was lowest at 30-40 days after flowering. Therefore, the optimal harvesting time of spring potato was judged to be 30-40 days after flowering, when marketable tuber size and quality were great as less affected by high temperature or waterlogging under natural environmental conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.639-646
• /
• 2022

Energy harvesting technologies that can convert wasted various energy into usable electrical energy have been widely investigated to overcome the limitation of batteries for the powering of IoT sensors and small electronic devices. Hybrid energy harvesting is known as a technology that enhances the output power of single energy harvesting device by housing two or more various energy harvesting mechanisms. In this study, we introduce a hybrid MME (Magneto-Mechano-Electric) generator coupled with the triboelectric effect. Through FEA modeling, four triboelectric materials, including PI (Polyimide), PFA(Teflon), Cu, and Al, were selected and compared with the expected triboelectric potentials. The effect of surface morphology was investigated as well. Among various combination of triboelectric materials and surface morphologies, PFA-Al combination with the surface morphology having nano-scale square projections showed highest output potential under triboelectrification. It is also experimentally confirmed that output voltage and power of the hybrid MME generator with triboelectric material combinations.

• Smart Structures and Systems
• /
• v.11 no.5
• /
• pp.555-567
• /
• 2013

An Remote Corrosion Monitoring (RCM) system consists of an anode with low potential, the metallic structures against corrosion, an electrode to provide reference potential, and a data-acquisition system to ensure the potential difference for anticorrosion. In more detail, the data-acquisition (DAQ) system monitors the potential difference between the metallic structures and a reference electrode to identify the correct potential level against the corrosion of the infrastructures. Then, the measured data are transmitted to a central office to remotely keep track of the status of the corrosion monitoring (CM) system. To date, the RCM system is designed to achieve low power consumption, so that it can be simply powered by batteries. However, due to memory effect and the limited number of recharge cycles, it can entail the maintenance fee or sometimes cause failure to protect the metallic structures. To address this issue, the low-overhead energy harvesting circuitry for the RCM systems has designed to replenish energy storage elements (ESEs) along with redeeming the leakage of supercapacitors. Our developed energy harvester can scavenge the ambient energy from the corrosion monitoring environments and store it as useful electrical energy for powering local data-acquisition systems. In particular, this paper considers the energy harvesting from potential difference due to galvanic corrosion between a metallic infrastructure and a permanent copper/copper sulfate reference electrode. In addition, supercapacitors are adopted as an ESE to compensate for or overcome the limitations of batteries. Experimental results show that our proposed harvesting schemes significantly reduce the overhead of the charging circuitry, which enable fully charging up to a 350-F supercapacitor under the low corrosion power of 3 mW (i.e., 1 V/3 mA).

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.136-141
• /
• 1998

To give some information on the harvest and storage of Chinese yam (Dioscorea opposita), the experiment was done to examine the effect of its harvesting date and storage method on tuber weight, tuberrelated characters during the storageor at the end of storage. The yam tubers harvested 4 times at 20 days interval from Oct. 15 were stored with different storage methods(pit, room and cold temperature) and on Mar.15. all the characters were measured. Fresh weight of the tuber harvestedafter Nov. 5 and stored were greater than that done on Oct. 15 while dry tuber weight did not have any difference between the harvesting dates. The fresh weigth done directly from the field on Mar. 15 was higher compared to the other harvesting dates owing to its higher moisture content. The rate of sound tuber stored at room or cold temperature condition was higher than that at the field at which the rate was greater at the harvest after late nov. compared to the earlier harvests. Although the two storages were similar at sound tuber rates and marketable yield, the tuber weight was more reduced when stored at room temperature than when done at cold temperature . Brightness and value 'b' of chromaticaity realted to the tuber coloring and sugar content were higher but moisture content was lowerwhen harvested on Oct. 15 than the other havesting dates. All the characteristics realted to the marketability after storage were nearly same when stored at room and cold temperature. Value 'a' of chromaticity and sugar content were higher when harvest on Mar. 15 than when harvested before Dec. 15 but the 'b' value and mositure content were reverse results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.631-631
• /
• 2013

Battery has major drawbacks including its size and life expectancy, and environmental problem. As an alternative, energy harvesting is emerging as a potential solution to replace battery along with more energy-efficient IT devices. The idea of harnessing energy from our living environment is sustainable, semi-permanent, and eco-friendly. Also, unlike battery, energy harvester does not require much space to store energy. Therefore, energy harvesting can provide a better source of power for small, portable, and wireless devices. Among various ways of harvesting energy from our surroundings, triboelectricity is chosen due to its potential to be miniaturized, and efficient. Triboelectric effect occurs as two different materials with different polarity of charge separation come into contact through friction, and then become separated so that electric potential difference is achieved. In this research, such characteristic of triboelectricity is used as a way to convert ambient mechanical energy into electric energy.Series of recent researches have shown promising results that the triboelectric energy harvester can be simple and cost effective. However, sufficient electricity level required to operate mobile devices has not yet been achieved.In this research, our group focuses on the design and optimization of triboelectric energy harvesting device to enhance its output. By using maskless lithography to pattern Kapton film and silicon substrate, which is used as a mold for PDMS thin layer, and sputtering metal electrodes on each side, we fabricate and demonstrate different designs of triboelectric energy harvester that utilizes the contact electrification between a polymer thin film and a metal thin foil. In order to achieve optimized result, the output voltage and current are measured under diverse conditions, which include different surface structure and pattern, material, and the gap between layers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.4
• /
• pp.53-59
• /
• 1982

In order to determine the optimun condition for the long term storage of potatoes by irradiation combined with natural low temperature, the dose range and irradiation time after harvesting of two varieties were investigated. Although optimum dose of potatoes and was different according to the variety 12.5krad seemed optimum untill 15-30 day after harvesting and 15krad was for later than 45 day after harvesting. The sooner the irradiation was efficient after harvesting. Optimum dose irradiated group were better in change of sprouting, rotting, weightloss and shrivelling and was extended the storage period more than four months compared with control at natural low temperature storage room.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.132-133
• /
• 2021

In recent years, energy harvesting from natural sources and waste heat has been attracting more attention from researchers in response to ever-growing energy demands, high energy prices, and climate-change-mitigation purposes. It is also an important step towards future sustainable energy usages. In thermal dynamic cycles, expanders are playing as the most important equipment for waste heat recovery and energy harvesting as well. As a kind of expander, the bladeless turbine has a promising future and more widely using owning its advantages on relatively long life, good off-design performance, easy operation cleaning and maintenance, a simple structure, no blade corrosion, and low manufacturing costs. There are numerous studies about using the Tesla Turbine as a key technology for energy harvesting in a wide range of applications and conditions. They are presented to help identify technologies that have sufficient potential for applicating to our life and marine industrial engineering. This review paper, initially, presents an overview of current studies both theoretical and experimental of Tesla Turbine usage for waste heat recovery alongside its challenges and investigation on the effect of its configuration, working fluid selection as well. To conclude, future perspectives besides possible ways of transforming waste heat energy to electricity or work, which leads to circular energy, are discussed. The ambition of this paper is to act as a first-hand reference, through the well-defined possible directions, to the young researchers and senior scientists.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.991-999
• /
• 2024

This study is based on research on a magnetic induction amplification power generation system using quantum fluctuations, and aims to confirm the similarity to the meissner effect through quantum analysis using magnets and suggest the possibility of utilizing alternative energy. Research was conducted on increasing the efficiency of motors based on the similarity between magnetic quantum array experimental devices and the superconductor phenomenon. It was confirmed that the experimental device that arranged the quantum of magnetism rotated by canceling out the magnetism by having a resistance value of "0", which is not a general characteristic of magnetism that generates attractive force. This is an observation of the similarity between the superconductor phenomenon and the meissner effect, and it was confirmed that material synthesis or temperature had little effect. This study confirmed that the efficiency is more than 20 times that of existing power on average. Therefore, this study suggests that there is a possibility of commercialization of an Energy Harvesting System (EHS) that can produce and store energy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.126-134
• /
• 2018

This study estimated the effect of sowing and harvesting dates on dry matter (DM) yield and feed value of forage oats at Sancheong, Korea. The forage oats (Darkhorse vs. Highspeed) were used in this experiment. The experimental main plots consisted of the different sowing and harvesting dates at 2 seasons as follows: spring oats of sowing (February 25, March 3 and March 13) and harvesting (May 27, June 6 and June 16); and fall oats of sowing (August 15, August 25 and September 4) and harvesting (October 15, October 25 and November 4). On spring oats, Highspeed sown on March 3 and then harvesting on June 6 had the highest (p<0.05) plant length and DM yield. Crude protein content decreased (p<0.05) in seed of the delayed-harvesting Highspeed. On fall oats, plant length and DM yield with the delayed-harvesting date increased (p<0.05), while crude protein content of the delayed-harvesting Highspeed decreased (p<0.05). This study concluded that the spring oat sown in early March and then harvesting in early June was recommended to increase dry matter and feed value although the fall oat sown in end August and then harvesting in early November was recommended for fall period.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.57-65
• /
• 2020

This study was conducted to investigate the effect of sowing and harvesting dates on agronomic characteristics and feed values of rye and triticale at Sanchoeng, South Korea. The experimental design consisted of the different sowing and harvesting dates as follows; rye (Secale cereale L., cv. Gogu) of sowing (October 15, 25, and November 5) in 2015 and harvesting (April 20, May 1 and May 11) in 2016, and triticale (X Triticosecale, cv. Joseong) of sowing (October 15, 25, and November 5) in 2015 and harvesting (May 18, 28, and June 7) in 2016. In rye, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. Crude protein (CP) content and relative feed value (RFV) decreased (p<0.05) with the delayed-harvesting date, but neutral detergent fiber (NDF) content increased (p<0.05). In triticale, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. The CP content decreased (p<0.05) with the delayed-harvesting date, but NDF content and RFV increased (p<0.05). This study concluded that rye sown in the middle of October then harvested in early May, and the triticale sown at the end of October then harvested at the end May are recommended to increase dry matter yield and feed value.