• The Korean Journal of Food And Nutrition
• /
• v.23 no.2
• /
• pp.178-185
• /
• 2010

Barley leaves tea white bread were prepared by the addition of 0.005, 0.010, 0.015, and 0.020% hemicellulase to flour of the basic formulation. The experiments and control were then compared in terms of quality characteristics, including pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, moisture content, color, textural characteristics, internal surface appearances, and sensory qualities in order to determine the optimal ratio of hemicellulase in the formulation. There were no significant differences in pH and total titratable acidity of dough and bread among the experiments. Fermentation power of dough expansion were increased as incubation time increased. Bread made by the addition of hemicellulase had significantly higher specific volume than the control group. However, lightness and yellowness showed the reverse effect. Greenness was not significantly different among the samples. Baking loss was the highest at the 0.020% addition level, and moisture content was maximal with the 0.010% addition, while the lowest in the control bread samples. As hemicellulase contents increased, harness and fracturability decreased. Resilience was maximal with the 0.015% addition, and was minimal in the 0.005% group. In the sensory evaluation, color, flavor, softness, overall acceptability, barley leaves flavor, delicious taste, astringency, bitterness, and off-flavor were not significantly different among the samples. In coclusion, the results indicate that adding 0.010% hemicellulase in barley leaves tea white bread is optimal for quality and provides a product with reasonably high overall acceptability.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.303-310
• /
• 2017

Pressure retarded osmosis(PRO) has attracted much attention as potential technology to reduce the overall energy consumption for reverse osmosis(RO) desalination. The RO/PRO hybrid process is considered as the most logical next step for future desalination. The PRO process aims to harness the osmotic energy difference of two aqueous solutions separated by a semipermeable membrane. By using the concentrated water(RO brine) discharged from existing RO plants, the PRO process can effectively exploit a greater salinity gradient to reduce the energy cost of processing concentrated water. However, in order to use RO brine as the draw solution, PRO membrane must have high water flux and enough mechanical strength to withstand the high operational pressure. This study investigates the development of a thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on the overall power density was studied using the characteristic factors of PRO membranes. Finally, the performance test of an 8-inch spiral wound module was carried out under various operating conditions(i.e. hydraulic pressure, flow rate, temperature). As the flow rate and temperature increased under the same hydraulic pressure, the PRO performance increased due to the growth of water permeability coefficient and osmotic pressure. For a high performance PRO system, in order to optimize the operating conditions, it is highly recommended that the flow pressure be minimized while the flow rate is maintained at a high level.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.16-21
• /
• 2014

The demand for food rises proportionally as population grows. To be able to achieve sustainable supply of livestock products, efficient farm management is a necessity. With the advancement in technology it also brought innovations that could be harness in order to achieve better productivity in animal production and agriculture. Precision Livestock Farming (PLF) is a budding concept of making use of smart sensors or available devices to automatically and continuously monitor and manage livestock production. With this concept, this paper introduces a swine management system that integrates image processing technique for weight monitoring. This system captures pig images using camera, evaluate and estimate the weight base on the captured image. It is comprised of Pig Module, Breeding Module, Health and Medication Module, Weighr Module, Data Analysis Module and Report Module to help swine farm administrators better understand the performance and situation of the swine farm. This paper aims to improve the management in both small and big livestock raisers.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.109-115
• /
• 2012

In order to evaluate the effect of structural degradation of a GFRP composite bogie frame due to ballast-flying phenomena, the impact test and residual compression test after impact was conducted for glass fiber/epoxy 4-harness satin woven laminate composites applied to skin part of a bogie frame. The impact test was performed using a instrumented impact testing system with energy levels of 5J, 10J, and 20J, and the impactor was designed to have various ballast shapes such as sphere, cube, and cone to consider the ballasted track environments. The residual compression strength was tested to evaluate the degradation of mechanical properties of impact-damaged laminate composites. The results showed that the damage area and the degradation of residual compressive strength after impact for laminate composites was increased with increase of impact energy for all ballast shapes, and was particularly most influenced by ballast shape of cone.

• Research in Community and Public Health Nursing
• /
• v.13 no.3
• /
• pp.574-583
• /
• 2002

'채석(quarrying)'산업은 노천광산에서 광물을 캐내는 작업을 모두 포함하는 광범위한 산업을 의미한다. 1900년대에 들어오면서 채석작업에 홈연소기(channel burner)을 이용한 불꽃절개법(flame cutting)이 이용하여 근로자의 먼지 노출이 많이 감소하였다. 채석작업으로 인한 주 된 건강문제는 먼지, 소음, 진동 노출이며, 노천작업장으로 작업환경이 개방되어 있어 환경측정 및 관리가 불가능하므로 개별근로자의 먼지와 소음 노출 측정 및 예방이 중요하다. 본 연구는 미국의 일개 채석회사의 근로자 건강관리사업을 평가하였다. 연구자료는 저자가 현장 방문을 통하여 구한 자료와 연구대상 회사의 안전관리자의 의견 및 미국 산업안전보건국 전산자료를 이용하였다. 채석사업장에서 이루어지는 작업은 크게 채석작업과 실내에서 이루어지는 가공작업 및 운반과 보관이며, 미국 산업안전보건국(OSHA)의 표준산업분류(SIC)에서 1411(채석업)과 3281(채석가공업)에 해당한다<표 1>. 연구 대상 사업장에서 이루어지는 산업보건프로그램은 먼지 노출 예방을 위해 석재 채취시 물분사법(water jet quarrying)과 국소환기법을 사용하고 소음 노출 예방을 위해 귀마개를 사용하며 사고 예방을 위하여 안전모와 철모, 보안경, 안전조끼, 보호장갑, 안전끈(harness)을 착용하였다. 평가 결과로 나온 연구 대상 사업장에서 적용하여야 할 산업보건 프로그램은 첫째, 먼지 노출로 인한 건강문제를 예방하기 위하여 근로자 개별 노출 측정을 하고, 둘째 실내가공작업장의 근로자를 대상으로 한 먼지와 소음 노출 측정 및 환경측정이 필요하며, 셋째 안전관리를 위해 채석장에 안전표지판을 설치하여야 하며, 실내가공 작업장의 자동이동시스템을 작업별로 채색하여 식별을 용이하게 하여야 하겠다. 또한 이 연구 결과를 영세사업장의 산업간호프로그램인 'Clean 3D'사업에서 적용하여 우리나라 채석사업장 근로자 건강관리를 발전시켜야 하겠다.

• Culinary science and hospitality research
• /
• v.23 no.7
• /
• pp.129-139
• /
• 2017

This study investigated the quality characteristics of baked rice cake using dry and wet rice flour. The moisture contents, color values, texture and sensory evaluation(attribute difference and acceptance) for the samples were tested. The moisture content of baked rice cake was the highest in rice cake baked with non- glutinous rice of dry type, and rice cake baked in dry type had weaker brownishness and therefore had higher brightness value compared to the rice cake baked in wet type. In relation to the texture, the hardness was found to be the highest in the rice cake baked with wet non- glutinous rice, and the rice cake baked with glutinous rice was found to be soft. The hardness was the lowest in both wet and dry glutinous rice, and was the highest in the wet non- glutinous rice. Attribute difference test of samples showed that, the rice cake baked with glutinous rice showed clear manifestation of springiness, moistness, adhesiveness, and gumminess (except for the harness). Although the cake baked with dry rice powder showed no significant difference, the dry glutinous rice flour was preferred the most. The rice cake baked with wet glutinous rice flour was preferred the most in terms of flavor, taste, texture, and overall acceptability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.633-636
• /
• 2017

This thesis is about the evaluation method of field uniformity for radiated immunity test of vehicle component. Radiated immunity test is to find out whether a EUT has enough immunity or hold normal operation during applied electromagnetic interference. Field Uniformity(FU) measurement is essential for generate uniform field on DUT and Harness. But Standard of Radiated Immunity(RI) test for vehicle component based on ISO 11452-2 has not been specified a Field Uniformity(FU). So compared and analyzed with other standard which is defined by a specified a Field Uniformity. As a result, deviation occurs in the difference test condition and test method. In this thesis, proposal new measurement method of field uniformity that is considered test conditions of ISO 11452-2 and check the validity through actual test.

• Composites Research
• /
• v.23 no.6
• /
• pp.19-25
• /
• 2010

This paper describes the optimum design of bolt locations for metal joint parts of railway bogie frame made of glass fiber/epoxy 4-harness satin woven laminate composite and PVC foam core. The optimum design analysis was done by sub-problem approximation method using Ansys Parameter Design Language(APDL). The sub-modeling method was introduced to conduct the detailed recalculation for the only target parts and reduce calculating time. The structural analysis for composite bogie frame was performed according to JIS E 4207. The results showed that the optimum design analysis using sub-modeling method was able to obtain faster and more precise results than that of the entire model by the control of mesh size for the target parts, and the maximum Von-Mises stress has been reduced in comparison with its original dimensions due to the optimum design of bolt locations.

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.143-150
• /
• 2007

Hardness of rubbery materials, which is important for dimensional stability and product performance, was investigated upon temperature change in this study. A newly developed IRHD (International Rubber Hardness Degree) tester was used to measure the hardness changes of NR and SBR specimens at various temperatures and the hardness values were compared with the Young's modulus. The harness and Young's modulus of NR and SBR showed an abrupt change near the glass transition temperatures. The hardness and Young's modulus were increased by increasing temperature due to the increased random chain conformation of molecules. The effect of temperature on hardness and Young's modulus of NR and SBR specimens filled with carbon black and silica was decreased by increasing filler content.

• Korean Journal of Clinical Pharmacy
• /
• v.23 no.3
• /
• pp.269-277
• /
• 2013

Objectives: The purpose of this study was to identify the factors which affect risk perception and attitude on government risk management over medications containing asbestos among parents of elementary school students. Methods: This research design was cross-sectional study using self-administered questionnaire. The survey subjects were parents of elementary school students in Seoul, total of 1,051 subjects. The survey period was from June through July of 2011. The collected data were analyzed using the SPSS 20.0. Results: The subjects perceived high risk regarding medications containing asbestos. About 83.6% of the subjects perceived that the result taking of medications containing asbestos was fatal, 82.8% felt that medications containing asbestos was a very serious social problem, 79.5% agreed that medications containing asbestos was a new type of threat. The risk perception for medications containing asbestos was related to political affiliation, attitudes of dealing medicines, main use of media, and personal communication credibility. Those who did not believe that the current government policy was correct and the government was working toward the public's benefit and not its own had the higher level of negative attitudes towards the government's risk management over the case of medications containing asbestos. Conclusion: In implementing government policy, all information should be efficiently and accurately communicated through a transparent implementation process. Also, the government must have plans for countermeasures in case of an emergency and respond efficiently in order to maintain their credibility. Moreover, this highlights the need for health authorities to exert more effort in increasing public education/awareness, especially those concerning drug and dug-taking behavior, in order to harness positive attitude and trust towards the government's policy. For a more effective risk communication, the media, health experts, government representatives, and related industries should work together.