• Korean Journal of Pharmacognosy
• /
• v.41 no.2
• /
• pp.136-140
• /
• 2010

This study was carried out to utilize non-toxic solvents instead of harmful solvents for the TLC(Thin Layer Chromatography) identification test of herbal medicines. It is recommended not to use harmful solvent such as chloroform at a viewpoint of clean analysis. In this study, we revised the identification test of 10 items in the Korea Pharmacopoeia(KP) and the Korean Herbal Pharmacopoeia(KHP) such as Cornus officinalis S. containing the harmful solvents on the developing solvent and established identification test that is utilized non-toxic solvents by HPTLC(High Performance Thin Layer Chromatography).

• Journal of the Korean Magnetic Resonance Society
• /
• v.25 no.4
• /
• pp.64-69
• /
• 2021

In the developed NMR hyperpolarization techniques, Signal amplification by reversible exchange (SABRE) technique is thought to be a promising method to overcome the low sensitivity of bio-NMR/MRI. Most experiments using SABRE have been done in methanol, which is biologically harmful solvent. Therefore, more biological friendly solvent, such as ethanol can be more appropriate solvent to be applicable in bio-NMR and MRI. As the proof of concept, successful hyperpolarization on pyridine via SABRE is carried out in ethanol and its enhancement factor is calculated to be more than 150 folds. To investigate more about its possibility of hyperpolarization in different alcohol solvents, methanol and propanol are used for SABRE in the same condition. The overall polarization trend in different external magnetic field is similar but its polarization number is decreased with higher molecular weight solvents (the order from methanol to propanol). This result indicates that the efficiency of SABRE is different from solvent system despite its same functional group and similar properties. Higher para-hydrogen concentration, higher partial pressure of para-hydrogen, and deuterated solvent can increase the hyperpolarization in any solvents. With these series of successful SABRE results, future studies on SABRE in more biofriendly environment, on more various solvent systems, and with more substrates are needed and it will be the firm basis for applying the SABRE system on the future bio-NMR/MRI.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.136-136
• /
• 2016

Commonly used oil-based polymer resin has environmental and safety issues. Many researches for replacing the harmful solvent-borne resins to water-borne resins have been investigated to purify harmful environmental resources and follow the export and import of hazardous materials regulations. In this research, ultrasonic spray coatings of aqueous polymer resin were studied to fabricate thin insulating layer (${\sim}{\mu}m$) on the rectangular copper wire. It needs to have appropriate wettability between resin and substrate during the ultrasonic spray coating process to coat aqueous polymer uniformly. Furthermore, stabilities of coating solution and fabricating process are required to form thin insulating layer on the substrate. In here, physical characteristics such as viscosity of 6 types of commercial polymer dispersions and emersions were analyzed to confirm compatibility for ultrasonic spray coating process. These resins were dissolved in isopropyl alcohol, used for true solvent, and were diluted with ethanol, utilized for diluent. Also, solubilities, dispersion characteristics, and viscosities of these diluted polymer resin solutions were confirmed. Dispersion characteristic and viscosity of coating solution affects jetting of ultrasonic spray coating and these jetting characteristics influence morphologies of insulating layer. In conclusion, we have known that aqueous polymer solution should have outstanding dispersion characteristic and certain range of viscosity to fabricate thin polymer insulating layer uniformly with ultrasonic spray coating.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• Natural Product Sciences
• /
• v.19 no.2
• /
• pp.166-172
• /
• 2013

Caffeine and epigallocatechin gallate (EGCG) are major constituents of green tea, the leaves of Camellia sinensis (Theaceae). Although EGCG is well known for diverse beneficial effect, caffeine is sometimes harmful with adverse effects. Therefore, the extraction efficiency was investigated using different extraction method such as extraction solvent, extraction time, extraction method, and repeated extraction. The content of EGCG and caffeine in green tea extract was quantitated by HPLC analysis. The extraction condition exerted difference on the extraction yield. The content of EGCG was also affected by different extraction condition. Especially, the extraction solvent greatly affected the content of EGCG in the extract. However, the content of caffeine was less affected compared to that of EGCG. The inhibitory effect of green tea extract on pancreatic lipase was almost similar regardless of extraction condition. Taken together, optimization of extraction condition will provide best efficacy for further development of green tea as anti-obesity therapeutics.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2724-2730
• /
• 2012

A new heterogeneous acidic catalyst was successfully prepared by impregnation of silica (Aerosil 300) by an acidic ionic liquid, named 1-(4-sulfonic acid)butylpyridinium hydrogen sulfate [$PYC_4SO_3H$][$HSO_4$], and characterized using FT-IR spectroscopy, the $N_2$ adsorption/desorption analysis (BET), thermal analysis (TG/DTG), and X-ray diffraction (XRD) techniques. The amount of loaded acidic ionic liquid on Aerosil 300 support was determined by acid-base titration. This new solid acidic supported heterogeneous catalyst exhibits excellent activity in the synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones by cyclocondensation reaction of 2-aminobenzamide with aromatic aldehydes under solvent-free conditions and the desired products were obtained in very short reaction times with high yields. This catalyst has the advantages of an easy catalyst separation from the reaction medium and lower problems of corrosion. Recycling of the catalyst and avoidance of using harmful organic solvent are other advantages of this simple procedure.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.21-26
• /
• 2022

Zinc is emerging as a environment-friendly plating material to replace cadmium, which is harmful to the human body, to prevent hydrogen gas penetration or release from metal materials. Electroplating of Zn and Zn alloys, which is usually performed in an aqueous acidic atmosphere, has disadvantages such as low coulombic efficiency, corrosion, and hydrogen release, resulting in industrial use difficult. In this study, a deep-eutectic solvent was synthesized using choline chloride and ethylene glycol. Using this as a solvent, an electrolyte for Zn plating was prepared, and then zinc was plated on the STS 304 substrate. The surface microstructure and roughness were observed using SEM and AFM. The crystal structure of the electro-plated film was analyzed using XRD. Finally, the preventing effects of hydrogen release through Zn-based deep-eutectic plating on the STS 304 substrate were compared with the uncoated substrate.

• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.50-53
• /
• 2015

Indium (In) is widely used for transparent electrodes of photovoltaics as a form of indium tin oxide (ITO) due to its superior characteristics of environmental stability, relatively low electrical resistivity and high transparency to visible light. However, In has been worn off in proportion to growth the In related market, and it leads to raise of price. Although In is obtained from ITO target scarps, much harmful elements are used for the recycling process. To decrease of harmful elements, ITO swarf particles obtained from target scraps was characterized whether it is feasible to transparent conductive oxide (TCO). The ITO swarf was crushed with milling process, and it was mixed with new ITO nanoparticles. The mixed particles were well dispersed into ink solvent to make-up an ink, and it was well coated onto glass substrate. After heat-treatment at $400^{\circ}C$ under $N_2$ rich environments, optical transmittance at 550 nm and sheet resistance of the ITO ink coated layer was 71.6% and $524.67{\Omega}/{\square}$, respectively. Therefore, it was concluded that the ITO swarf was feasible to TCO of touch screen panel.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.814-824
• /
• 2005

This study analyzed and standardized the harmful substances of organic compounds(dioxins) in disposable diapers for infant's clothing. Commercial samples obtained from Korea, Japan, America and German were determined by HRGC/HRMS. Experimental Methods were consisted of comparision of extracting solvent, analysis of PCDD/Fs, and analysis of PCDD/Fs of extraction in disposable diaper. The results were as follows. No high TEQ values in TCDD(1), PCDD(0.5) and HxCDD(0.1) were found for commercial disposable diapers from country Korea, Japan, U.S.A and German. In extraction for 6hrs experiments, HpCDD and OCDD were detected in disposable diapers of U1, U2 and G2, respectively. In extraction fur 24hrs experiments, HpCDD, OCDD and OCDF were detected in disposable diapers of J3, U1, U2 and U3. So we need to set standards of measurement for harmful materials contained in textile goods. This will make a safe and comfortable clothing environment for all users, regardless of age.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.100-106
• /
• 1999

Use of chemical preservative for controlling harmful microorganisms in food products has been debated due to public concerns about food quality because of perceived toxic and carcinogenic potential. Thus, use of non toxic natural antimicrobial agents has become essential. This study was investigated to determine the antimicrobial activity of water or ethanol extract of commercially available tea, and of solvent fractionated ethanol extracts obtained from steamed green tea. Both of water and ethanol extracts of green tea(steamed or roasted), oolong tea and black tea exhibited strong antimicrobial activity against gram positive and negative bacteria, but not effective against yeast and mold. Also, antimicrobial activity of ethanol extract of 4 different kinds of tea was stronger than that of water extract. Among 4 different tea, ethanol extract of steamed green tea was further fractionated. One thousand g/disk buthanol extract had the strongest antimicrobial activity against bacteria and mold. The concentration of the antimicrobial activity of buthanol extract in tested microorganisms ranged from 125~1000 g/disk except for Rhizopus javanicus. Antimicrobial activity of buthanol extract of steamed green tea was not destroyed by heating at 100oC for 60 min and at 121oC for 15 min, which is very stable over heat treatment. The inhibitory effect of the buthanol extract on the growth of Listeria monocytogenes and Staphylococcus aureus was investigated. Growth of both strains was started in the presence of 250 and 500 g/ml after 12 and 24 hour respectively, whereas complete inactivation of both strains was occurred in the presence of 1000 g/ml.