• Journal of the Korean Wood Science and Technology
• /
• 제46권3호
• /
• pp.285-296
• /
• 2018

ISPM No. 15에 의거한 열처리 목재의 검증을 위한 연구로서 열처리 목재 표면의 분광학적 특성을 분석하였다. IR 스펙트럼 상에서는 다양한 작용기들이 확인되지만 수종간, 열처리 시간 및 보관 기간에 따른 특별한 차이를 발견하기 어려웠다. HBI(hydrogen-bonding intensity)는 보관 기간에 따른 열처리 목재의 변화는 관찰할 수 있지만 열처리 시간에 따른 변화는 관찰하기 어려웠다. 하지만 PCA score plot 상에서 수종 내에서 60분 혹은 90분의 열처리 시간에 따라 목재의 분류가 가능하였다. PCA에서 열처리 목재의 분류의 기준은 목재 내 리그닌의 방향족 환과 셀룰로오스의 C-H bending이었으며 이들 성분에 의해 ISPM No. 15로 열처리된 목재를 분류할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.1-7
• /
• 2005

Tree species of wooden structural members of the Beomeo Temple were identified based on light and scanning electron microscopic characters in the present study. Of 10 structural members, 9 softwoods and 1 hardwood were identified. Among softwood members, 7 belonged to hard pine of the Sylvestris section, and the remaining 2 to hard pine of other than the Sylvestris section and hemlock of the genus Tsuga, respectively. A single hardwood member was identified as white oak of the Prinus section under the subgenus Lepidobalanus.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.49-66
• /
• 1990

In order to identify an unknown wood sample native to Korea. the softwood databases(KSWCHUN; Korean SoftWood CHUN) and the hardwood databases(KHWCHUN; Korean HardWood CHUN) had been built. and the new computer searching programs(IDINEX; IDentification INformation EXpress) has been written in Turbo Pascal(V.5.0) and in Macro Assembly(V.5.0). The characters of the data were based on the 74 features of softwood and on the 148 features of hardwood which are a part of new "IAWA list of microscopic features for hardwood identification" published in 1989. For the purpose of this investigation the wood anatomical nature of 25 species of softwood(13 genera of 5 families) and of 112 species of hardwood(57 genera of 31 families) were observed under a scanning electron microscope and light microscope. and a lot of literature used. The IDINEX programs are based on edge-punched card keys. with several improvements. The maximum number of features in the IDINEX is 229. but that is fixed for a given database. Large numbers of taxa are handled efficiently and new taxa easily added. A search may be based on sequence numbers of features. Comparisons are made sequentially by feature and taxon using the entire suite of features specified to produce the list of possible matching taxa. The results are followings. (1) The databases of Korean wood and the searching programs(IDINEX) had been built. (2) The databases of Korean wood could be an information to search an unknown wood. (3) The databases would be valuable. for the new features, which were not mentioned in Korean wood up to the present. were observed in details. (4) The ultrastructures of the cell walls(warty layer) and crystals observed under a scanning electron microscope will be helpful to search an unknown wood in particular. (5) The searching process is more quick and accurate than the others. 6) We can obtain the information on the differences of a species from the other and search an unknown wood using probability. in IDINEX, (7) The IDINEX will be utilized to identify and classify an animal life, vegetable world, mineral kingdom, and so on.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.550-565
• /
• 2021

본 연구에서는 문경 조령 주흘관(제 1관문) 목부재에 대해 수종과 연륜연대분석을 진행하여 재질과 건축역사를 조사하고자 하였다. 주흘관 목부재(84점)의 수종은 소나무류 76점, 잣나무류 5점, 전나무속 3점으로 확인되었다. 연륜연대분석은 코어링법을 이용하여 시료를 채취하였으며, TSAP프로그램으로 크로스데이팅을 하였다. 연륜연대분석 결과, 소나무류 목부재 59점에 대한 최외각 연도는 1708년 여름-1709년 늦가을, 1792년 여름-1794년 초봄, 1838년 늦가을-1840년 초봄, 1867년과 1872년 초봄-늦가을로 총 4개의 벌채시기가 확인되었다. 이러한 벌채시기들은 조선왕족실록, 주흘관중수기, 주흘관 성벽 각기의 수리기록과 일치한 것을 확인하였다. 일부 부재들은 수리기록과 벌채시기간의 약 10년 정도 차이가 나타나 당시 벌채한 목재를 저장하여 사용한 것으로 판단된다.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2000년도 춘계 학술논문발표회 논문집
• /
• pp.174-179
• /
• 2000

목재를 취급하는 사업장에서는 작업시에 발생하는 목재분진과 합께 포롬알데이드 및 소음에 대한 노출이 근로자의 직업병발생에 관여하는 중요한 인자가 된다. 목재의 종류는 크게 두가지로 나눌 수 있으며 이것은 경질목재(hard wood)와 연질목재(soft wood)를 말한다. 근로자가 목재분진에 노출되었을 때 건강에 미치는 영향은 매우 복잡하지만, 특히 경질목재를 사용하는 사람은 코에 대한 영향의 징후가 높다고 알려져 있다. (중략)

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.276-285
• /
• 2010

Recently the Korean government has tried to cut down the $PM_{10}$ concentration by the Special Law for Air Quality Improvement. But the concentrations of $PM_{10}$ have exceeded the air quality standard at most monitoring stations. Primary $PM_{10}$ emitted from various sources and emission data have large uncertainty. The biomass burning is one of the major sources of $PM_{10}$ emission. The biomass burning is composed of wood stove usage, meat cooking and agricultural combustion etc.. Activity data and emission factors for the biomass burning are limited, and it is hard to calculate the air pollution emissions from these sources. In this study, we tried to estimate the air pollution emission from residential wood stove usage. The number of total wood stoves is estimated by the survey of wood stove manufacturer. And air pollution emission factors for the wood stove are investigated using the flue gas measurement by U.S. EPA particulate test method (Method 5G). As the results, the $PM_{10}$ and CO emission factors of wood stove are estimated as 7.7 g/kg-wood and 78.8 g/kg-wood respectively. The annual $PM_{10}$ and CO emissions from wood stove are calculated as 1,200~3,600 ton/year and 12,600~36,400 ton/year in Korea. It is confirmed that wood stove is the one of major sources of biomass burning, and the survey for activity data and the measurement for emission factors are needed for reducing the uncertainty of these emission data.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.43-49
• /
• 2006

The surface and pore structure of cellulose fibers have a significant impact on the properties and performance in applications. Cellulase enzymatic hydrolysis of cellulose fibers can result in changes to the surface and pore structure thus providing a useful tool for fiber modification. This research characterizes these changes using various test methods such as fiber dimension, water retention value, hard-to-remove water content, freezing and non-freezing bound water content, polymer adsorption, and crystallinity index. For a high-dosage enzyme treatment (0.10 g/g), the fiber length was significantly decreased and the fibers were 'cut' in the cross direction, not in the axial direction. The swelling capacities as measured by the WRV and HR water content increased for the high-dosage treatment. Three independent measurements (non-freezing bound water, polymer adsorption, and crystallinity index) are in good agreement with the statement that the amorphous regions of cellulose fibers are a more readily available substrate relative to crystalline regions. Based on the experimental results obtained herein, a model was proposed to explain surface and pore structure modification of cellulose fibers via enzymatic treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제41권3호
• /
• pp.201-210
• /
• 2013

대구 북지장사 대웅전(보물 제 805호, 1659년 건축)에 쓰인 주요 목부재의 수종을 식별하기 위하여 기둥, 창방, 평방, 도리, 추녀 등 총 117점을 조사하였다. 수종 식별 결과, 기둥 부재의 경우, 소나무류(적송류) 5개, 상수리나무류 2개, 솔송나무속 3개 등의 세 수종으로 식별되었다. 활주는 4개 중 1개는 소나무류이고, 나머지 3개는 전나무속으로 식별되었다. 창방은 소나무류 8개, 상수리나무류 1개로, 평방은 소나무류 3개와 상수리나무류 6개로 식별되었다. 도리는 소나무류 17개, 상수리나무류 16개, 외래산 소나무류 1개 등 세 수종으로 식별되었다. 추녀는 3개가 소나무류, 나머지 1개가 상수리나무류로, 그리고 사래는 소나무류 2개, 느티나무속 1개, 외래산 소나무류 1개로 식별되었다. 포부재(31개)와 장여(4개), 덧추녀(2개)는 모두 소나무류로 식별되었다. 전체적으로 보면 소나무류(70.1%)와 상수리나무류(22.2%)가 대부분을 차지하였고 기둥, 도리, 사래 등의 일부에 사용된 솔송나무속과 외래산 소나무류 그리고 활주에 사용된 전나무속은 근래의 보수 시에 사용된 수입산 수종으로 추정된다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.11-21
• /
• 2005

영광 불갑사의 대웅전에 쓰인 목재의 수종을 식별하기 위하여 기둥, 보, 평방, 창방, 도리, 사래, 추녀, 서까래 등 총 88점을 조사하였다. 수종은 경송류(소나무류), 전나무속, 참나무(상수리나무류), 느티나무 등 4수종이 식별되었다. 기둥과 사래는 느티나무의 비율이 높았으나, 다른 부재는 경송류가 대부분이었다. 기둥과 사래의 느티나무의 비율이 높은 것은 조선후기 이전에는 소나무보다 재질이 우수한 느티나무가 많이 사용되었기 때문이라고 생각된다.