• Journal of Korean Society of Forest Science
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1962

Hysteresis Loops explaining relationship between E.M.C. and relative humidities of some commercial woods grown in Korea which have not been inspected were studied. Because of Hysteresis Loops are differently constructed among species, the loop of each species is necessary to plot in order to apply for seasoning of wood directly. Therefore relationship between E.M.C. and relative humidities, and Hysteresis Loops were inspected and compaired between species. Small sized ($3{\times}3{\times}1.3cm$) twenty pieces of wood blocks for each species were taken from log which cut few years ago and already attained air dry condition. Five relative humidity conditions (9, 32, 58, 82 and 91%) were controlled to keep constant in the cabinet under temperature $25^{\circ}C$. According to the results, it is concluded that there are considerable differences on the E.M.C. among two types of sorption, eight species and five different relative humidity conditions. Adsorption and desorption curves are showing characteristic Sigmeid Curves and desorption curves always are on the adsorption curves at all compaired species. Average hysteresis ratio is 0.75, the constructed loops of tested species are showing open hysteresis generally and flatten loop constructions of Qnerets aemitissima and Robinia pseudoaeaeia of hard wood species than other soft wood are considered to be established by differences of stability between hard and soft wood.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.19-23
• /
• 1977

Tropical hard wood produces a number of extracts, especially hot-water extracts. The lignin content in the two kinds of bangkirai and red lauan belonging to genus Shorea, was as high as in temperate zone soft wood, mangrove wood of genus Rhizophara contained it on the same level as temperate zone hard wood and keruing of genus Dipterocarpus was in between the two kinds of bangkirau and red lauan, and keruing wood. The xylose content of saccharose composition in the tree of genus Shorea, was as low as in needle-leaved trees, mangrove wood contained it on the same level as broad-leaved trees and the xylose content in keruing wood was in between the above two kinds of wood. The total retrieving rate of alditol acetate acetificated with sulphuric acid and acetic anhydride, did not reach 100%, even if it was supplemented. There was no difficulty in analyzing alditol immediately after acetification but, when it was left for four or five days, the acetificated alditol acetate was dissolved. The pyridine alditol acetificated with pyridine and acetic anhydride, showed the same result.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.52-60
• /
• 2009

Joyangru, which is located in Woodo mountain in Chuncheon, Korea, was a gate tower of Monsogak. There are little historical records about Joyangru except of the 20th-century records. To study about Joyangru history, a dendrochronological analysis was conducted. We identified also the species of woods, We took 87 samples of wood elements for the species analysis and 13 samples for the dendrochronological analysis. We found 78 hard pines(Diploxylon), 4 Douglass-fir, 3 exotic hard pines(Pinus ponderosa type) and 1 Shorea sp.(Dipterocarpaceae). In the dendrochronological analysis, 2 floor flames were dated in 1887 (with complete sapwood) and 2 beams in 1884. We concluded that Joyangru was reconstructed just after 1888, most likely in 1890 together with Monsogak.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.472-478
• /
• 2018

In this study, the sintering mechanism of woodceramics (WCs) from cashew nut shell waste (CNSW) was studied by analyzing chemical reactions and structural changes during the sintering process of of CNSW powder, liquefied wood and green bodies of WCs at $900^{\circ}C$ for 60 minutes in the $CO_2$ atmosphere. The chemical and structural properties of the products were investigated by X-ray diffraction (XRD), Raman spectroscopy, Fourier Transform Infrared (FTIR), and scanning electron microscope (SEM). The results showed that the decomposition reactions of liquefied wood and CNSW occurred simultaneously to form the hard carbon and the soft carbon at high temperature. The sintering mechanism of WCs has been presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.27-28
• /
• 2011

This research aims to secure fundamental data for the development offire-retardant wood by soaking dried wood in fire-retardant liquid. To dry wood, optimal drying conditions for softwood usually used as structural material and hardwood usually used as finishing or furniture material were derived by varying the microwave outputs and heating times of microwave wood drying equipment. The research foundthat each specimen needs 8 to 15 minutes of heating time depending on water content and output. For softwood, fire-retardant liquid equivalent to about 10 percent of the total mass of the specimen infiltrated into the dried wood, of which the water content was reduced to 5~6 percent.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.39-41
• /
• 1965

(1) The durability of fifteen species of hard woods grown in Kangwon-do in relation to Polystictus Versecolor L. Fr. and Irpex consors Berk was studied. (2) The least affected hard wood species by Polystutus Versecolor L. Fr. were Q. serrata, C. crenata, M. amurensis, F. rhynchophylla and J. mandschrica; the moderatly affected species were Q. Variabilis, U. Davidiana var japonica, B. latiforia, C. controversa, P. padus and A. mono; and the most highly affected species were P. serrulata var. spondanea, S. obassia, T. amurensis and B. schmidtii. The least affected hard wood species by Irpex consors Berk, were U. Davidiana var japonica, C. crenata, M. amurensis, F. rhynchophylla, and J. mandshurica; the moderatly affected species were Q. Valiabilis, Q. serrata, P. serrulata var. spondanea, C. controversa, and A. mono; and the most highly affected species were B. latiforia, P. padus, S. obassia, T. amurensis, and J-mandshurica. (3) No difference was obscured on the durabilities on effected by kind of fungus. (4) Correlationship between specific gravity and durability of the woods was not significant.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.157-162
• /
• 2004

The objectives of this experiment were to study the growth and development of fruiting body of the two Ganoderma lucidum isolates on log of the soft wood Paraserianthes falcataria and the hard wood Shorea sp., and determination of organic germanium and crude ganoderic acid content of the fruiting body produced. The two Ganoderma lucidum isolates used were one Indonesian native (Indonesia isolate) and another isolate was purchased from Fungi Perfecti, USA (commercial isolate). The development and quality of the primordium and fruiting body of the mushroom, in general, were influenced by the isolates used. The types of wood, however, had no effect on the quality of the primordium and fruiting body produced. The Indonesian isolate produced better fruiting body compared to that of the commercial isolate. The development of fruiting body from primordium, however, was low for the two isolates tested. In general, only about one third of the primordium developed further into mature fruiting bodies, except for the commercial isolate grown on the soft wood medium in which more than 60% of the primordium developed into mature fruiting body. Apart from producing normal fruiting body, the commercial isolate also produced an abnormal one, which had a white mature pileus, whereas the normal one was brownish red. The organic germanium concentration of the fruiting body produced on the hard wood, in general, was higher than that of grown on the soft wood. The fruiting body from commercial isolate had higher organic germanium concentration compared to that of Indonesian isolate in both wood types. The two isolates used, however, had almost the same value of the crude ganoderic acid concentration in both types of wood tested. The Indonesian isolate had higher total yield of both organic germanium and crude ganoderic acid of the fruiting body produced compared to that of the commercial isolate.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.95-104
• /
• 2009

The study was carried out to analyze wood quality of coffin board, the wood species of coffin excavated in Youngdong, Korea. All coffin woods were identified as hard pines, Korean red pine(Pinus densiflora S. & Z.). According to wood quality of coffins, inner coffins of Bae Cheon-Jo and his wife showed similarity and dissimilarity comparing with several literatures. The similarity was in the structure of panels, bottom lining board and charcoal layer, and the dissimilarity was in jointing. From the analysis of fibrous materials attached to coffin woods, the paper mulberry and cotton fibers were identified. In the inner coffin of Bae Cheon-Jo, tool traces by handle planer were observed.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.897-902
• /
• 2016

This study was conducted to identify wood species from main pillars of Daeungjeon Hall, the main building of Jeonghyesa Temple located in Suncheon, Jeollanamdo Province in Korea. It was known that this temple had been built in the $8^{th}$ century by Hyeso, a national master in the Unified Silla period, and was designated as Treasure No. 804 in 1984 due to its historic and academic values. The results of wood species identification showed that main pillars from Daeungjeon Hall of the Jeonghyesa Temple were made of hard pine, Korean fir (Abies spp.) and Zelkova tree (Zelkova spp.). In addition to the wood species identification, floor plan documentation was also done to help identify what wood species had been used for main pillars. These results could be applied and utilized for the conservation and restoration of Daeungjeon Hall in future. This study may help with the authenticity of conservation works.