1. Under the request of the Dept. of Navy, U.S.A. this investigation has been done as a part work of the Navy Research Project of Tropical Woods at the Wood Technology Laboratory, School of Forestry, Yale University, New Haven, Conn., U.S.A. 2. In order to determine the equilibrium moisture content and hysteresis loop of three tropical woods (Ocotea, Tablebuia, and Hymenaea) which have not been tested the physical properties, this investigation has made with small thin specimens (1.5"${\times}$1.0${\times}$0.4) under four different controlled relative humidity conditions (that is, 21%, 53%, 60%, and 83%). 3. As the result, the equilibrium moisture content and hysteresis loop of three tropical woods have been shown in the Table and Figures 2, 3 and 4. 4. According to the results, it is concluded that there are the considerable differences in the equilibrium moisture content under the same relative humidity condition and the type of hysteresis loop between different species which have been tested. 5. Desorption of lumber with slightly oscillating humidity of each species tested, has shown on the Table 9 and it has almost the same tendency of results showing the difference between species as the small specimen. 6. Although it is hard to compare the difference of results, E.M.C., and hysteresis between tropical wood and woods from temperate zone, there are, however, still some difference between species. 7. The author wishes to acknowledge my indebtedness to Prof. Wangaard, and Prof. Dickinson for the competent guidance and good advice on this study, and also to Mr. Clanchs for the help in getting materials for the experiment.
Present studies were carried out to understand the way of propagation of Osmanthus which has much value as ornamental trees in southern parts of Korea. The results of these experiments were summarized as follows: 1. In order to increase the survival of Osmanthus, scions of Osmanthus was grafted on the stocks of Ligustrum obtusifolium S. et Z. The survival of the grafts were 63% for Osmanthus fragrans var. aurantiacus Makino and 60% for Osmanthus asiaticus Nakai. 2. The growth of the grafts was initiated from 28th day after the grafting and the height growth resumed three times, and the growth percentage was 63% for Osmanthus fragrans var. aurantiacus and 59% for Osmanthus asiaticus. 3. Cutting medium mixed with perlite and vermiculite (1:1) gave better results than either use of them separately, and the rooting percentage was 93% for Osmanthus fragrans var. aurantiacus and 90% for Osmanthus asiaticus. 4. Rooting percentage of cuttings was lower in hard-wood cutting than that of in green-wood cutting. 5. Grafts showed fairly good height growth in July and September, and ceased growth in October. 6. Correlation between height growth and diameter of root collar of grafts in case of Osmanthus fiagrans var. aurantiacus was highly significant and showed linear correlation ($r=0.70^{**}$)
This study is aimed to measure the physical colorimetric property according to three conditions, natural dyestuffs (Gardenia, Sappan wood, Lac, Gardenia blue, Mugwort, and Indigo), fabric types (cotton, silk), and presence of mordant (without, with), and then to evaluate the psychological sensibility. Also, to perform analysis of variance (ANOVA) to find out the differences of physical properties according to the three natural dyeing conditions, and to analyze the relationship between physical property and psychological property by Pearson's correlation analysis and then suggest the prediction model by regression analysis using SPSS program (ver. 21.0). Finally, to propose a certain sensibility image map of naturally dyed fabrics, MDS (Multidimensional Scaling) was used, and as a result, Gardenia dyed fabrics having the color sensibilities such as 'hard' and 'heavy' were suggested to evoke masculine image, and to evoke feminine image, Sappan wood and Lac having 'bright', 'transparent', 'soft' and 'light' sensibilities were suggested. Natural image might be induced by using 'subdued' Mugwort dyed fabrics, and active image might be induced by using 'showy' Indigo dyed fabric.
This study was carried out to make hardboard fire retardants and to examine the properties of the hard-board treated with them. The fire retardant treatment was achieved by surface impregnation of water soluble retardant chemicals into the forming mat with 55 percent of moisture content. followed by the hot pressing process. Ammonium monophosphate, ammonium diphosphate, sodium borate, and boric acid were used as the fire retardants. Fire retardant test was carried out by using the differential thermal analysis thermogram. The results are summarized as follows: 1. Fire retardant-treated hardboard showed higher values of the specific gravity. water absoption, and flexural strength than those of untreated hardboard. Especially, the treatment of ammonium monophosphate gave the best results in the flexural strength, and a 10 gr/$ft^2$ loading of the fire retardant compound of ammonium monophoshate, ammonium diphosphate, and sodium borate drew the best flexural strength value among the three different experimental loadings of 10, 20 and 30 gr/$ft^2$. 2. There were no definite differences in moisture content between the fire retardant-treated hardboard and the untreated hardboard. 3. The fire retardant compound of ammonium monophosphate, ammonium diphosphate, and sodium borate resulted in the best fire retardancy, and its fire retardancy was increased in proportion to the increase of loading.
This study carried out first a component survey on the domestic waste shipped into a waste disposal facility in B city, and then heavy metal analysis of each component according to the SRF standards. Based on this, this study explored the problems with domestic waste and measures to improve them. The results are as follows. The result of the survey of physical components show that paper accounted for the largest proportion with 20.5 %~59.9 %, metals (including batteries) among incombustibles accounted for 0.0~8.3 %, other inorganic substances, glass and ceramics accounted for 0.0~43.7 % and 0.0 %~19.6 % respectively. However, the proportion of coated viny and plastics, which have high lead and cadmium content, was rather high with 2.9 %~30.9 %. This suggests the possibility that actual concentration of lead and cadmium within SRF is likely to be higher. Among the 15 components contained in the waste brought into the waste disposal facility, 10 components (food waste, textiles, vinyl, plastics, wood, rubber and leather, paper, metals, electronic substrates, and nail polish) were analyzed according to assay samples (approximately 0.1 g and 0.3 g). The result of analysis shows that the amount of Cd and Pb detected in coated vinyl for 0.109 g of assay sample was 98.6 mg/kg and 20.6 mg/kg respectively; 117.0 mg/kg and 29.0 mg/kg respectively for 0.313 g of assay sample. This is high contents exceeding the Cd standard. As for wooden component, the amount of Pb was 480.0 mg/kg for 0.3 g of assay sample. This suggests that there always exists the possibility of exceeding the exposure level of heavy metals (Cd and Pb) in SRF as long as coated wood and vinyl plastics with high contents of Pb and Cd are shipped into the waste disposal facility; and the local government and the residents need to work hard to improve the situation including development of the machine to sort electronic substrates and batteries for separate collection of the waste of coated vinyl and plastics within domestic waste.
Thuja koraiensis Nak. is a short and creeping evergreen shrub which reaches about 3 m in height and only occurs in the northeast China and in high mountains over the Korea. It's designated as a rare and endangered tree species in Korea and DD (data deficient) in Red List Category & Criteria of IUCN. This study was carried out to develop the propagation technique by cutting for conservation of genetic resources of T. koraiensis. The rooting responses of branch cuttings, obtained from hard (May) and semi-hard wood shots (August) to three plant growth regulators (PGRs), namely, IAA, IBA, and NAA applied at various concentrations (0, 100, 500, 1000, 2000, and 3000 mg/l) were examined in sand and mixed soil media. Percentage of rooting showed significant difference between cutting time, among kinds and among concentration of PGRs. The optimum cutting time was April to May in hardwood cutting. The application of IAA 1000 mg/l and NAA 500mg/l were effective in callus formation and rooting of cutting. Relatively, rooting of cutting of the control taken in May was above 93%.
Juniperus chinensis var. sargentii Henry is a short and creeping evergreen shrub which reaches about 60 cm in height and only occurs in the northeast Asia and in the top of high mountains over the Korea. The Korea Forest Service protects it strictly by law since J. chinensis var. sargentii is an eccentric plant and possibly may be exterminated soon in Korea. This study was carried out to develop the propagation technique by cutting for conservation of genetic resources of J. chinensis var. sargentii. The rooting responses of branch cuttings, obtained from hard(May) and semi-hard wood shoots (August) to four growth regulators, namely, IAA, IBA, NAA and Rooton(exceptionally powder method) applied at various concentrations(0, 100, 200, 500, 1000 and 2000 $mgL^{-1}$) were examined in mixed soil media. Rooting rate showed significant difference between cutting times, among kinds and among concentrations of growth regulators. The optimum cutting time was April to May in hardwood cutting. The application of IBA 1000 $mgL^{-1}$(rooting rate : 36.4%) was most effective in callus formation and rooting of cutting. Relatively, rooting of cutting of the control taken in May was 30.4%. Root characteristics such as number, length and diameter of root were not significantly affected by kinds and concentrations of growth regulators in hardwood cutting.
In this study, to conserve the clay seated Vairocana Buddha triad in Seonunsa temple, Gochang (Treasure 1752), the primary materials employed for creating the clay Buddha statues were scientifically analyzed. By analyzing the soil layer constituting the Buddha statues, it is observed that the said layer comprises sand having particle size greater than that of medium sand and soil having particle size smaller than that of fine sand, which were used in a ratio of 7:3, along with the bast fibers of paper mulberry (Broussonetia kazinoki). Hence, the aforementioned soil layer is composed of a mixture of sand and weathered soil, along with bast fibers to prevent scattering. By analyzing the tree species, it is found that the wooden materials constituting the bottom board and the interior of Buddha's sleeves of the Amitabha Buddha statue, Vairocana Buddha statue, and Medicine Buddha statue are hard pines (Pinus spp.). Additionally, three layers are found in the cross section of the gold layer. Furthermore, each of the hair sections of the Buddha statues is composed of earthy materials such as quartz, albite, microcline, mica, and magnetite, and the hair surface was painted by incorporating black materials containing magnetite.
Proceeding of Spring/Autumn Annual Conference of KHA
/
2006.11a
/
pp.386-391
/
2006
Though a variety of demands for an green dwelling, it is hard to diffuse a wooden house due to high construction cost. So this study aims to diffuse to propose a space modular for production and supply. Therefore the result of investigation to the space modular of each room through the survey of width and depth in the type of dwelling in korea is as follows. 1) Investigated the mixture of magnitude on the total width and depth, the survey is showed commonly 3.6m and 4.2m. 2) Once the depth is 3.6m, a living room and inner room, room's width is 3.9m, 4.5m. Once the depth is 4.2m, those width is 4.8m. 3) By use of a survey, the post distances consisted of all rooms are 3.6m, 3.9m, 4.2m, 4.5m, 4.8m. The result of investigation to possibility for mixture applied to six level types invested post modules to the wooden house of post & Beam method is as follows. 1) With the regularity of depth and simplicity of width, It is potential to compound floor plan in korea. 2) It is possible to plan an informal shape of kitchen+dining room which is a spare space available for the merit changeable space after arranged main rooms. 3) It is possible to plan a space through a variety of mixture method at bathroom. Thus, it is possible for a variety of floor formations to build a low-cost wooden house through five types of post distance.
Debris flows are a natural hazard which looks like a combination of flood, land and rock slide. Large rainfall in July 2006 produced several large scale debris flows and many small debris flows that resulted in loss of life and considerable property and railway damage, as was widely reported in the national media. The hazard "debris flow" is still insufficiently researched. Furthermore debris flows are very hard to predict. Flexible Ring net barriers are multi-functional mitigation devices commonly applied to rock fall or floating wood protection in floods, snow avalanches and also mud flows or granular debris flows, if properly dimensioned for the process or processes for which they are intended. Overtopping of the barriers by debris flows and sediment transport is possible, supporting the design concept that a series of barriers may be used to stop volumes of debris larger than are possible using only one barrier. The future for these barrier concepts looks promising because these barriers represent the state of art for such applications and are superior to many other available options.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.