• 제목/요약/키워드: hard breakdown

검색결과 34건 처리시간 0.023초

Aspects of Hard Breakdown Characteristics in a 2.2-nm-thick $SiO_2$ Film

  • Komiya, Kenji;Omura, Yasuhisa
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제2권3호
    • /
    • pp.164-169
    • /
    • 2002
  • This paper mainly discusses the hard breakdown of 2.2-nm-thick $SiO_2$ films. It is shown that the hard breakdown event of a 2.2-nm-thick $SiO_2$ film greatly depends on the applied electric field. It is strongly suggested that the local weak spots created by applying a low initial stress to a 2.2-nm-thick $SiO_2$film resist the onset of hard breakdown. In other words, it is anticipated that the stored electrostatic energy is fast dissipated by trap-assisted tunneling in 2.2-nm-thick $SiO_2$ film. Consequently, it is strongly suggested that 2.2-nm-thick $SiO_2$ films are intrinsically quite robust.

$SF_{6}$ 가스의 온도변화에 따른 절연특성 (The Characteristics of Insulation with Temperature Variations of $SF_{6}$)

  • 이광식;박광서;박경태;김이국;박창기
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권8호
    • /
    • pp.354-358
    • /
    • 2003
  • In this paper, insulations characteristics by temperature changes(+50~-50[$^{\circ}C$]) of $SF_{6}$ gas in the experimental chamber were studied. From this result, at the low temperature, the breakdown voltage was increased with a drop of temperature and an increase of inner pressure in GIS. In addition the ability of insulation of liquid $SF_{6}$ was higher than that of the highly pressurized $SF_{6}$ gas. That is, with progress of low temperature, the main reason of breakdown was not liquefaction of $SF_{6}$ but rapid decrease of inner pressure. This study will come in greatly handy for the insulation design of GIS in a hard cold region

저항률에 따른 수중방전 특성에 관한 연구 (A Study of underwater discharge characteristics in different resistivity)

  • 이복희;최종혁;이강수;;;안창환;정용기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.254-255
    • /
    • 2007
  • This paper describes underwater discharge phenomena which are less studied than gas, solid and dielectric liquid. Since discharge phenomena were affected by various factors, we investigated the effect of water resistivity in point-plane gap by impulse voltage. In discharge photograph, it is hard to discover the streamer development in positive polarity at high reisistivity. On the other hand, the streamer originated at the tip of rod and developed toward the plane with increasing voltage. It is found that the breakdown voltage of both polarities in lower resistivity are lower than that of high resistivity. High current flowing in lower resistivity before the breakdown induce more streamer and enhance the probability of breakdown.

  • PDF

충남지역의 주요 착유시설 이용실태 (The Recent Progress and Trend of Major Milking Installation in Chungnam Province)

  • 성시홍;이승기;이대원;박원종;김현태;권순홍
    • 한국축산시설환경학회지
    • /
    • 제7권2호
    • /
    • pp.63-76
    • /
    • 2001
  • A survey was conducted for dairy farmer to manage efficiently of a milking machine and equipment. Labor hours, operation costs, and milking cares for each dairy farmer to estimate the expected numbers of machine and equipment on the basis of the desired dairy farm scale. Based on the results of this research the following conclusions were made: Those who possessed a herringborn system and a tandem parlour system were relatively small portion 2% and 25% respectively of the whole dairy farmer. To improve dairy farmer\`s life, or to reduce his hard labor hours. it was necessary for most of dairy farmers to possess a herringborn system and a tandem parlour system. However, it was difficult for most of farmers to purchase a herringborn system and a tadem parlour system, because these system were very expensive. Only 20% farmers of the whole farmers repaired their milking system, which needed to be repaired quickly enough so that it might was used everyday. Among the parts of milking system, pulsator was found to have the highest breakdown ratio 59%, and vacuum pump was the breakdown ratio 27%. It took more than 2 hours to be milked twice a cow per one day. It means that milking spend so much time. Therefore, the auto milking system should be supplied to decrease hard labor hour.

  • PDF

경계조건 분석을 통한 LCCBS 연계방안 (A Linkage Method for the Life Cycle Cost Breakdown Structure through an Analysis of Boundary Conditions)

  • 정재혁;김태희
    • 한국건축시공학회지
    • /
    • 제13권4호
    • /
    • pp.321-332
    • /
    • 2013
  • 건축물의 생애주기비용은 시행과정 전 단계에서 상호 연관되어 비용이 발생하며 각 단계마다 서로 간에 영향력이 존재한다. 하지만 건축 프로젝트의 각 단계별 CBS가 서로 상이하여 합리적인 공사비를 산정하는데 문제점이 발생한다. 따라서 본 연구에서는 기존에 연구되었던 LCCBS를 바탕으로 건축 프로젝트 각 단계 간에 경계조건을 분석하였다. 또한 분석된 경계조건을 바탕으로 분절요인을 분석하고 이에 따른 연계방안을 모색하였다. 연계방안의 유효성 검증을 위해 실제 건축프로젝트를 바탕으로 사례적용을 실시하였다. 분석결과 누락되는 항목이 97.2%이상을 개선하였고 평균 6시간 빠르게 업무를 수행할 수 있음을 확인할 수 있었다. 향후, LCC 시스템에 적용함으로써 LCC의 효율적인 산정 및 LCC 절감을 계획할 수 있을 것으로 사료다.

산지가 다른 메밀전분의 이화학적 특성 (Physicochemical Properties of Buckwheat Starches from Different Areas)

  • 김진기;김성곤
    • 한국식품과학회지
    • /
    • 제36권4호
    • /
    • pp.598-603
    • /
    • 2004
  • 산지가 다른 지역(대만, 중국, 한국, 미국)에서 자란 4종의 메밀전분의 이화학적 특성을 살펴보았다. 그 결과를 살펴보면 전분의 외형은 4종 모두 다각형의 입자로 넓게 분포되어 있으며, X-ray 관찰결과 대다수의 천연 전분과 마찬가지로 4종 모두 A형에 속해 있었다. 수분함량은 6.3-9.58%사이에 있었으며, 조 단백은 대만산과 중국산이 한국산과 미국산시료보다 높게 나타났으며, 지방함량은 한국산과 중국산이 다른 2종의 시료보다 높게 나타냈다. 청가(BV)를 살펴보면 중국산이 0.39로 가장 높게 나타났고, 한국산이 0.32로 가장 낮게 나타났다. 아밀로오스 함량은 미국산이 27.6으로 가장 높고, 한국산이 가장 낮았다. 물결합력에서는 대만산의 시료가 가장 높고, 미국산이 가장 낮았다. 아밀로오스 함량이 비교적 높은 중국산과 미국산은 팽윤력과 용해도에서 낮게 나타났다. 신속점도측정기(RVA)에 의한 측정결과 최고점도, 가공의 안정성을 나타내는 breakdown, 노화에 밀접한 관계를 나타내는 setback 모두 미국산이 가장 높게 나타나 미국산이 비교적 hard gel한 경향을 나타내었다.

Power Management IC용 One-Time Programmable Memory Cell 설계 (Design of a One-Time Programmable Memory Cell for Power Management ICs)

  • 전황곤;여억녕;김려연;김두휘;장지혜;이재형;하판봉;김영희
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 추계학술대회
    • /
    • pp.84-87
    • /
    • 2010
  • 본 논문에서는 power management IC에 사용되는 아날로그 트리밍용 antifuse OTP 셀을 제작하였다. VPP (=7V)와 VNN (=-5V)의 Dual program voltage를 이용하는 antifuse OTP 셀은 antifuse 양단에 hard breakdown 이상의 전압을 인가하여 thin gate oxide를 breakdown시킨다. $0.18{\mu}m$ BCD 공정을 이용하여 제작된 antifuse OTP 셀의 면적은 $48.01{\mu}m^2$으로 eFuse OTP 셀 면적의 44.6% 수준이다. 20개의 테스트 패턴을 측정한 결과 프로그램 후 antifuse의 저항은 수 $k{\Omega}$ 이하로 양호하게 측정되었다.

  • PDF

Compromised extraction sockets: a new classification and prevalence involving both soft and hard tissue loss

  • Kim, Jung-Ju;Amara, Heithem Ben;Chung, Inna;Koo, Ki-Tae
    • Journal of Periodontal and Implant Science
    • /
    • 제51권2호
    • /
    • pp.100-113
    • /
    • 2021
  • Purpose: Previous studies have solely focused on fresh extraction sockets, whereas in clinical settings, alveolar sockets are commonly associated with chronic inflammation. Because the extent of tissue destruction varies depending on the origin and the severity of inflammation, infected alveolar sockets may display various configurations of their remaining soft and hard tissues following tooth extraction. The aim of this study was to classify infected alveolar sockets and to provide the appropriate treatment approaches. Methods: A proposed classification of extraction sockets with chronic inflammation was developed based upon the morphology of the bone defect and soft tissue at the time of tooth extraction. The prevalence of each type of the suggested classification was determined retrospectively in a cohort of patients who underwent, between 2011 and 2015, immediate bone grafting procedures (ridge preservation/augmentation) after tooth extractions at Seoul National University Dental Hospital. Results: The extraction sockets were classified into 5 types: type I, type II, type III, type IV (A & B), and type V. In this system, the severity of bone and soft tissue breakdown increases from type I to type V, while the reconstruction potential and treatment predictability decrease according to the same sequence of socket types. The retrospective screening of the included extraction sites revealed that most of the sockets assigned to ridge preservation displayed features of type IV (86.87%). Conclusions: The present article classified different types of commonly observed infected sockets based on diverse levels of ridge destruction. Type IV sockets, featuring an advanced breakdown of alveolar bone, appear to be more frequent than the other socket types.

하이드록시프로필화 녹두, 고구마, 물밤 전분의 이화학적 특성과 하드캡슐 제조 (Physicochemical Properties of the Hydroxypropylated Mung Bean, Sweet Potato and Water Chestnut Starches for Hard Capsules Formation)

  • 장정화;고정아;박현진
    • 한국포장학회지
    • /
    • 제19권2호
    • /
    • pp.75-80
    • /
    • 2013
  • 녹두, 고구마, 물밤 전분에 propylene oxide를 0~18% 첨가하여 하이드록시프로필화 전분을 제조하여 하드캡슐 제조시 젤라틴 대체제로서의 가능성을 검토하였다. RVA 시험결과 propylene oxide 첨가량이 증가할수록 호화온도와 setback은 감소했고 최고 점도와 breakdown은 증가하였다. 팽윤력은 녹두의 경우 propylene oxide 양이 12% 이상 첨가되었을 때 급격히 증가하였고 고구마와 물밤은 9% 첨가했을때부터 증가하기 시작하였다. 투명도는 녹두가 다른 전분보다 가장 높았으며 propylene oxide 첨가량에 유의적으로 증가했고 고구마와 물밤의 경우 하이드록시프로필화 전분이 일반 전분보다는 증가했으나 propylene oxide의 양에 따른 경향성은 보이지 않았다. 붕해도 시험에서는 물밤의 경우 propylene oxide 6% 이상 첨가하였을 때 완전히 용해되었고 녹두와 고구마는 12% 이상 첨가되었을 때 완전히 용해되었다. 본 실험에서는 하이드록시프로필화 전분이 젤라틴 또는 동물성단백질을 기본으로 제조된 하드캡슐의 대체제로써 의약 산업에서 활용될 수 있는 가능성을 보여주었다. 본 연구결과를 토대로 하이드록시프로필화 전분 필름의 물성, 온도와 pH에 따른 붕해도 실험등이 추가 연구된다면 전분 하드캡슐로 상용화도 가능할 것이라 생각된다.

  • PDF

도입 밀의 제빵적성과 산화제 첨가효과 (Baking Quality of Flours and Effect of Oxidants)

  • 황성연
    • 한국식품과학회지
    • /
    • 제20권6호
    • /
    • pp.890-894
    • /
    • 1988
  • DNS, HRW 및 ASW를 시험제분한 밀가루와 산화 처리한 HRW, ASW 밀가루의 amylogram farinogram 등으로 제방적성을 시험하고 이들 밀가루로 만든 빵의 품질을 평가하였다. 단백질 함량이 HRW가 ASW보다 3%정도 많았지만 baked gluten의 specific volume은 거의 비슷하였다. HRW와 ASW에 $KBrO_3$ 50ppm, DHA 100ppm을 첨가한 결과 farinogram상의 stability가 증가되고 departure time, time to breakdown이 연장되었다. HRW로 만든 빵의 specific volume이 다른 것보다 작았지만 산화제로 처리한 결과 현저한 개선을 보였다. 한편 ASW경우 산화제 처리 후의 차이점이 크지 않았다.

  • PDF