• 로봇학회논문지
• /
• 제19권1호
• /
• pp.58-64
• /
• 2024

The ability of the robot gripper to handle a wide range of objects significantly impacts its operational effectiveness. Among the robot grippers commonly used, the economically feasible choice is the relatively simple structure of a parallel gripper. To perform more densely packed tasks with a parallel gripper, it should be capable of handling small objects. Therefore, this study designs a parallel gripper mechanism equipped with assisting grippers to ensure smooth grasping of small objects. The parallel gripper is designed using a rack and pinion gear system, with two additional grippers on both side, and these assisting grippers are designed to be detachable. The two assisting grippers have different type of tip to grasp thin fabric shapes and thin stick shapes. The gripper prototype is used to verify the grasping capabilities for shapes achievable with a conventional parallel gripper and those intended for grasping with the assisting grippers through grasping experiments. Consequently, by equipping a conventional parallel gripper with assisting grippers as in this study, it becomes capable of handling a broader range of objects, in addition to its existing functionality.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.14-21
• /
• 1993

Pneumatic actuators have greater power to weight ratio than electric ones, but they have been rarely used as robotic actuators because of poor accuracy resulted from nonliearity of air. On the other hand, electric servo motors have glld controllability, but they have poor power to weight ratio. For the heavy load handling robot a combined actuating method was developed for vertical and horizontal axes of RISTBOT-ll which handles up to 250kgf load. In this paper, the control method is implemented and analyzed for the manufactured heavy load handling robot.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.160-168
• /
• 1997

A $H_{\infty}$self-tuning control scheme for the tip position of a flexible link robot handling unknown loads is presented here. The scheme essentially comprises a recursive least-squares identification algorithm and $H_{\infty}$self-tunning controller. The $H_{\infty}$control low is designed to be robust to uncertain parameters and the self-tunning action provides adaption to unknown parameters. Through numerical study, the performance comparison of the $H_{\infty}$self-tuning controller with a constant gain $H_{\infty}$controller as well as a LQG self-tuning controller clearly shows its superior ability in handling load changes in quiescent states.nt states.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.168-171
• /
• 1993

In this paper, we design a time optimal controller of a dual arm robot to handle the object. Differently from the master-slave type robot, same priority is imposed on the both of the arms for effective handling the specifed object. For finding a time optimal collision-free trajectory, a graphical method is applied for the robot with two degree of freedom. Some simulation results show the effectiveness of the proposed method.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.98-104
• /
• 2005

A glass transfer robot is used for handling LCDs in the production line of flat panel displays under clean environments. During glass transfer operations of the robot, chattering phenomenon occurs at the robot hand. This deteriorates the accuracy and repeatability of the end-effector of the robot. In this paper, we present the kinematic solution of the robot and then analyze the cause of this chattering phenomenon in view of the mechanism and servo control and propose a practical solution that can reduce the chattering significantly at the robot hand of the glass transfer robot.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.183-184
• /
• 2010

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.24-30
• /
• 2014

In this paper, a new remote terminal unit(hereafter RTU) is proposed to manage a wide range of applications and a variety of sensors (eg, pressure, water quality, temperature and humidity sensors, the amount of pollutants, $CO_2$, etc.) to monitor and control the facility such as water treatment plant, intake and effluent pumping station, water tank and distribution network. Fault status of local sensor devices and network are alerted by using the embedded fault handling capabilities of the RTU in the system and also sent to the fault handling server, by which fault can be easily monitored to users. The developed system was applied to one of K-water branch offices in Geoje city and improved its reliability and stability for controlling and monitoring water facility.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.23-28
• /
• 2019

In recent years, medium- to large-scale transportation machinery and machine tool manufacturing process lines have shown a trend toward centralization, softening, lightening, and slimming to reduce costs and increase productivity. This has increased the demand for vertical articulated robots. When developing and introducing a heavy weight-handling robot that can be easily applied to existing production lines, it is expected to have a great effect in securing industrial competitiveness by solving industrial issues such as the decreased productivity and increased risk of accidents due to work involving heavy lifting. In this study, we design a 6-axis robot mechanism with a heavy load-handling capacity of 700kg or more for large-sized materials of various types supplied in small quantities.

• 전기의세계
• /
• 제29권8호
• /
• pp.491-494
• /
• 1980

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2760-2769
• /
• 2011

지능형 자율 로봇은 주어진 목표를 달성하기 위하여 계획을 수립한다. 계획은 로봇이 목표를 달성하기 위한 행위들의 나열이며 모든 행위들이 순차적으로 그리고 성공적으로 실행되었을 때 목표를 달성하게 된다. 그러나 복잡하고 역동적인 현실 세계에서는 여러 가지 요인에 의하여 발생할 수 있는 예상하지 못한 상황으로 인하여 로봇이 계획한 행위들을 더 이상 실행하지 못하는 경우가 발생할 수 있다. 그러므로 지능형 자율 로봇은 이러한 돌발 상황을 적절히 대처하여 주어진 임무를 성공적으로 완수할 수 있는 효과적인 처리 방법을 가지고 있어야 한다. 이정표 상태를 이용한 계획 보정 방법은 이러한 상황을 효과적으로 처리할 수 있는 방법으로서 다른 계획 보정 방법들의 장점을 가지고 있다. 본 논문은 이정표 상태를 생성하는 방법으로 후진 방법과 이정표 상태들을 구성하는 조건들에 가중치를 부여하는 방법을 제안한다. 오류 보정 방법은 부여된 가중치를 보정해야 할 조건들의 우선순위로 사용할 수 있다. 후진 방법에 의하여 생성된 이정표 상태들은 복잡정도가 낮고 또한 적당한 값의 가중치를 가지게 되므로 이정표를 이용한 효율적인 계획 오류 보정 방법을 보장하게 된다.