• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.2
• /
• pp.52-60
• /
• 1986

This study was carried out to compare the handle of silk fabrics degummed with Alkalase, Protease produced by bacteria, with of silkfabrics degummed with the soap-soda. 1. In twill habutae, the stiffiness of silk fabric degummed with Alkalase was lower than that of silkfabirc degummed with soap-soda. The soft feeling value which is meaning the total Mandle value of medium fabirc for lady, as well as the Smothness, were more improved in enzymatic degumming than in the soap-soda degumming. 2. In case of Crep De Chine representing thin fabric for lady, the stiffness and Anti-Drape stiffness of the fabric degummed with Alkalase were lower than those of fabric degummed with the soap-soda, but the fullness and the Flexibilit with smooth feeling which is meaning the Total Handle value were higher.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.2
• /
• pp.27-34
• /
• 1985

Cotton, P/C and polyester fabrics were laundered and treated with 4 kinds of aftertreating agent(antistatic and softening agents) on marketing. Some treating condition:. which include agent concenteration, treating time and rinsing extent after laundering, were varied. And then the effects of agents with each treating condition-handle value, charged voltage and half-life, and crease recovery etc.-were determined and discussed about their change. The improvement of handle and antistatic properties by treatment were indicated remarkably for cotton fabric and P/C and polyester fabrics respectively. Generally, the handle value of cotton was decreased and then increased again, and the charged voltage and half-life of P/C and polyester fabrics were decreased with increase of concenteration of agents. The effect of antistatic improvement for P/C fabric was larger than polyester fabric at even lower concenteration of agents. The effects were increased with treating time and rinsing extent. In particular, those of short time(1 minute) treatment were very small.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.792-800
• /
• 1996

The shape retention finishing provides a fabric for easiness of no-ironing after laundering. In spite of the obvious importance of the new finishing treatment, few systematic studies have been performed on the handle of the fabrics finished by the durable press process. The purpose of this research is to investigate the relationships among the mechanical properties, durable press conditions, primary hand values and the total hand value of the fabrics finished by shape retention process. In this experiment, durable press grade of unfinished fabrics decreased below 2.5, but those of finished fabrics maintained above 4, but the mechanical properties of finished fabrics did not change significantly after laundering. In finished fabrics, D.P. value were correlated with mechanical properties, but had little effects with H.V. and T.H.V. Since the evaluation of the effect of durable press process was done with the naked eyes and standard sample, we could not know exactly change o( mechanical properties, but trace the change of mechanical properties which gave influences on the durable press effects by using KES-FB System.

• Journal of the military operations research society of Korea
• /
• v.28 no.2
• /
• pp.34-55
• /
• 2002

This paper deals with the multiple attribute decision making problem when a decision maker incompletely articulates his/her preferences about the attribute weight and alternative value. Furthermore, we consider the attribute tree which is structured hierarchically. Techniques for establishing dominance with linear partial information are proposed in a hierarchically structured attribute tree. The linear additive value function under certainty is used in the model. The incompletely specified information constructs a feasible region of linear constraints and therefore the pairwise dominance relationship between alternatives leads to intractable non-linear programming. Hence, we propose solution techniques to handle this difficulty. Also, to handle the tree structure, we break down the attribute tree into sub-trees. Due to there cursive structure of the solution technique, the optimization results from sub-trees can be utilized in computing the value interval on the topmost attribute. The value intervals computed by the proposed solution techniques can be used to establishing the pairwise dominance relation between alternatives. In this paper, pairwise dominance relation will be represented as strict dominance and weak dominance, which ware already defined in earlier researches.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.2
• /
• pp.47-57
• /
• 1984

Effect on the hand value and mechanical properties of blend ratio and weight had been investigated Oil summer suits for men. Relation between the mechanical properties and the deformation in behavior was also studied. The mechanical properties which influence the hand values and total hand value had been discussed and the relation between mechanical properties, hand values and fabric count had, too. As result, the following conclusions had been obtained. 1) The values of tensile properties increased with the increase of blend ratio of wool. The values of surface properties increased according to the increase of blend ratio of polyester. 2HB(bending properties) of polyester/wool blend showed higher value than that of $100\%$ wool, but there was no change in the shearing properties according to the blend ratio. The values of stiffness, crispness and anti-drape stiffness of blend fabric showed higher values than those of $100\%$ wool fabric. The value of fullness (including softness) of blend fabric showed lower value than that of $100\%$ wool fabric. 2) The correlation between hand values and mechanical properties showed following order. in stiffness : bending properties>surface properties in crispness: surface properties>bending properties in anti-drape stiffness: bending properties>surface properties>shearing properties.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.67-72
• /
• 1987

This study was carried out for the optimum predegumming in the protease degumming process of silk fabrics by ocmparing the physical properties of silk fabrics degummed with different weight losses of predegumming. 1. In twill habutai, the stiffness of fabric was reduced and the smoothness was improved with increasing weight loss of predegmming, however, the soft feeling value which means the total handle value of medium fabric for lady, was maximum at 20% of predegumming weight loss. 2. In the case of crepe de chine representing thin fabric for lady, the anti-drape stiffness was relatively increased with 22% weight loss of predegumming. However, the other physical properties, such as the flexibility with soft feeling were less related to the degrees of predegumming.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.301-305
• /
• 1996

$\mu$ theory can handle the parametric uncertainty and produces more non-conservative controller than H$_{\infty}$ control theory. However an existing solution of the theory, D-K iteration, creates a controller of huge order and cannot handle the real or mixed real-complex perturbation sets. In this paper, we use genetic algorithms to solve these problems of the D-K iteration method. The Youla parameterization is used to obtain all stabilizing controllers and the genetic algorithms determines the values of the state feedback gain, the observer gain, and Q parameter to minimize $\mu$, the structured singular value, of given system. From an example, we show that this method produces lower order controller which controls a real parameter-perturbed plant than D-K iteration method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.404-411
• /
• 2005

To increase accurateness and reliability of the evaluation of power tool vibration transmitted to an operator, it is necessary to measure the grip and feed forces during the measurement of hand-transmitted vibration. In the study a system was invented to measure the vibration and the grip and/or feed force, which consists of a measurement handle and a PC with a data acquisition system and the corresponding software. Strain gauges and an accelerometer were mounted on the handle surface for the simultaneous measurement of the forces and the vibration. The program in the system makes it possible to monitor the grip and feed force during the tool operation so that the operator keeps the applying forces within the pre-determined range. Investigating the vibration total values, frequency-weighted root-mean-square accelerations at the handle, obtained in repetition for each power tool with control of the grip and feed force showed more consistency than those measured without force control. By using the system the experimenter can reduce random error of the measured vibration.