• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.52-59
• /
• 2005

Most of printing paper market today have been occupied by western paper and some machine-made Hanji used don't show the characteristic advantages for traditional hand-made Hanji. Although hand-made Hanji has an aesthetic and qualitative value, it has limited uses because of poor printability as printing paper. Unlike western paper, conventional Hanji cannot be used as Printing paper because it is impossible to make the clear formation of printed dot and to develop a high level of sizing and picking problem occurs during printing. Improvements of physical and optical properties such as roughness, smoothness, air permeability, contact angle, opacity, and paper gloss as well as sizing level were accomplished through internal and surface sizing and calendering, which made the paper better suited for printing and decreased problems during printing.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.117-136
• /
• 2014

The purpose of this study is to present a classification system of the hand-made and machine-made lace according to the configuration method and re-make the category and definition of lace to consider the emergence and development of major laces techniques. The re-made category and definition of the lace is as follows. The lace usually consists of ground and motifs, however, the techniques of netting and sprang are suitable for making ground than motif, so I think it is appropriate to exclude them from the category of the lace. Many scholars are excluded openwork embroidery fabric from the category of the lace. But, an openwork embroidery fabric is the basis of a needle point lace called true lace and is consist of motif and ground. I think it is appropriate to include it in the category of the lace. I think it is also appropriate to include in the category of the lace that the eyelet embroidery fabric which mimics the openwork embroidery fabric in the machine. Lace is redefined that a fabric with openwork decoration consists of motif and ground, constructed by a variety of ways such as plaiting, twisting, looping, knotting of threads or embroidering by hand or machine. The classification of the lace is presented as follows. Hand-made lace is classified bobbin lace, needle point lace, embroidery lace, knotted lace, crochet lace, and knitting lace. Machine-made lace is classified raschel lace, leaver lace, torchon lace, and machine-made embroidery laces which include tool lace, eyelet embroidery lace, chemical lace, etc.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.395-398
• /
• 2003

This study presents wrong hand calculations for fault analysis at field on the real AC railway system. Hence, we correctly revised the hand calculations. We propose AC railway system model by using EMTDC. Fault studies are performed. We also compare revised hand calculations with EMTDC simulation to verify the proposed model made by EMTDC. So, we can confirm that the model made by using EMTDC is correctly designed.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.31-36
• /
• 2013

For lighting of dark and hazardous workplace such as compartment of ships under construction, workers should use hand lamps of explosion-proof type. However, the heavy weight of such lamps has prevented most impatient workers from using such types of lamps extensively. In this paper, we developed a light weight hand lamp of intrinsic safety type which reduced the weight a lot while maintaining or improving the lighting and explosion-proof function. We made a prototype which consisted of lamp fixture and high frequency power supply. Testing results show that the hand lamp meets well all the explosion-proof testing requirements of the Korea Occupational Safety and Health Agency. And more, we surveyed the explosion protection technology of a light weight hand lamp, and suggested the advantage/disadvantage to apply lighting of hand lamp about economical aspect.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1361-1364
• /
• 2001

The recent national contract (Ecotechnopia 21) supported by the ministry of environment puts much significance on new issues for the assessment of human effects arising from vibration and noise exposed to human. This paper focuses only on hand-arm vibration since it has been a major problem in protecting vibration exposure to human. To set up a systematic way of assessing adverse effects of hand-arm vibration, surveys were made on recent international standards and researches related to hand-arm vibration. The measurement and evaluation methods of hand-arm transmitted vibration, the relationship between vibration exposure and effects on health, and the assessment methods of nerve dysfunctions are addressed in this paper. Those methods are linked into a logical way of assessing effects of hand-arm vibration on human. Finally, the current activities and achievements in this work are briefly summarised.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.1
• /
• pp.69-81
• /
• 1995

Few studies on the biomechanical analysis of hand postures and tool handling tasks exist because of the lack of appropriate measurement techniques for hand force. A measurement system for the finger forces and joint angles for the analysis of manual tool handling tasks was developed in this study. The measurement system consists of a force sensing glove made from twelve Force Sensitive Resistors and an angle-measuring glove (Cyberglove$^{TM}$, Virtual technologies) with eighteem joint angle sensors. A biomechanical model of the hand using the data from the measurement system was also developed. Systems of computerized procedures were implemented inte- grating the hand posture measurement system, biomechanical analysis system, and the task analysis system for manual tool handling tasks. The measurement system was useful in providing the hand force data needed for an existing task analysis system used in CTD risk evaluation. It is expected that the hand posture measurement developed in this study will provide an efficient and cost-effective solution to task analysis of manual tool handling tasks.s.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.553-556
• /
• 2015

In almost all of the Hand-made suit plants, while garment cutters are hard to measure the body size by their own, they are not quick. And each of the individual's standard is vague, so it is hard to get a consistency. So it will give the customers some displeasure with the body contact. To improve this kind of problems, in this paper proposes a efficient way that is hard to measure by the general image processing technology to measure when you manufacture a Hand-made suit and measure a body size by wearing a elastic band that has a printed mark that has some information of length and taking a picture of the body by a digital camera.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.947-956
• /
• 2018

This research has been conducted to design upright parts of hand-made vehicles with the purpose of reducing material and machining cost while ensuring structural safety. Aluminum knuckles were modelled with three parts in order to enhance design flexibility as well as to reduce CNC machining cost. A vehicle model was constructed in CAD program and simulated in ADAMS View in order to estimate joint forces developing during 20 degree step steering condition at 60km/h. The joint forces obtained in the vehicle dynamics simulation were used for the structural analysis in ANSYS and dimensions of knuckle parts were adjusted until the lowest safety factor reached 2.0. The weight of knuckle decreased by 50% compared to the previous version that was designed without the structural analysis. The overall manufacturing cost decreased by 33% due to the reduction in the material as well as the CNC machining effort.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.251-260
• /
• 2004

As a basic experiment for robot hand for transplanting plug seedling, the experimental robot hand system which moves up and downward vertically, and allows hand blade to open and close was made. The system was constructed with the robot hand mechanism, the tray, the plug seedling, and the measuring equipments. The penetrating force and holding efficiency were analyzed according to the soil moisture and the variation of hand blade angle. The highest holding efficiency could be obtained at the penetrating angle of approximately from 0 to 0.36 degree and at the moisture content of soil from 71% to 75%. The external force acted on the robot hand should maximum force when the robot hand was penetrated to soil, minimum of approximately 30.4 N when the penetrating angle was 0$^{\circ}$ and moisture content was 66-70%. It was increased with increasing or decreasing the Penetrating angle from 0 degree and also with increasing or decreasing the moisture content of soil from 66-70%. For optimal design of the robot hand and manipulator, the external force acted on robot hand had to be based on the returning force of soil, when the robot hand was penetrated to the soil. In consideration of safety ratio, the appropriate external force seemed to be 39-49 N.

• Journal of Conservation Science
• /
• v.5 no.1 s.5
• /
• pp.11-19
• /
• 1996

This research carried out on characteristics of degradation for the handmade Japanese paper(Washi) and handmade Korean paper(Hanji), which are not studied clearly at present, made an experiment on the physical and the optical tests to the temperature and humidity, The results are as follows ;The handmade Korean paper showed worse results of physical and optical tests than those of Washi. Above all, that low durability was the most characteristics. The handmade paper demands preservation, and therefore, the fiber selection of compositive materials is important. For the handmade Korean paper showed this time, put waste pulps off, and adjust the mixing maintaining appropriate basis weight, and then it must be improved durability.