Browse > Article
http://dx.doi.org/10.5307/JBE.2004.29.3.251

Development of Robot Hand for Transplanting Plug Seedlings  

이현동 (Institute of Agricultural Science & Technology, Chungnam National Univ.)
김기대 (Dept. of Agricultural Machinery Engineering, Chungnam National Univ)
조성화 (Dept. of Agricultural Machinery Engineering, Chungnam National Univ.)
김찬수 (Institute of Agricultural Science & Technology, Chungnam National Univ.)
Publication Information
Journal of Biosystems Engineering / v.29, no.3, 2004 , pp. 251-260 More about this Journal
Abstract
As a basic experiment for robot hand for transplanting plug seedling, the experimental robot hand system which moves up and downward vertically, and allows hand blade to open and close was made. The system was constructed with the robot hand mechanism, the tray, the plug seedling, and the measuring equipments. The penetrating force and holding efficiency were analyzed according to the soil moisture and the variation of hand blade angle. The highest holding efficiency could be obtained at the penetrating angle of approximately from 0 to 0.36 degree and at the moisture content of soil from 71% to 75%. The external force acted on the robot hand should maximum force when the robot hand was penetrated to soil, minimum of approximately 30.4 N when the penetrating angle was 0$^{\circ}$ and moisture content was 66-70%. It was increased with increasing or decreasing the Penetrating angle from 0 degree and also with increasing or decreasing the moisture content of soil from 66-70%. For optimal design of the robot hand and manipulator, the external force acted on robot hand had to be based on the returning force of soil, when the robot hand was penetrated to the soil. In consideration of safety ratio, the appropriate external force seemed to be 39-49 N.
Keywords
Robot hand; Transplanting; Plug seedling;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Lee, H. D., K. D. Kim and C. S. Kim. 1998. Development of transplanting robot system for tissue culture plants (I) -A Soft Gripper -. J. of KSAM Vol. 23(5): 491-498
2 Ting, K. C. et. al. 1988. End-effect development for robotic tansplanting of seedling. An ASAE meeting presentation. Paper No. 88-1544
3 Kim, K. D., S. Ozaki and T. Kojima. 1995. Development of an automatic robot system for a vegetable factory. I. Transplanting and raising seedling robot in a nursery room. Proceedings of ARBIP95, Kobe, Japan. Vol. 1:157-163
4 Ryu, K. H., K. Y. Kim and J. I. Park. 1998. Development of a Gripper for Robotic Transplanter and Evaluation of Its Transplanting Performance. J. of KSAM Vol. 23(3):277-284
5 Kutz, L. J. and J. B. Craven. 1994. Evaluation of photoelectric Sensors for robotic transplanting. ASAE. Vol. 10(1):297-304